misc: pch_phub: Add UART_CLK quirk for Boston platform (bed3d7ba) · Commits · 戴 / test

The EG20T has 4 UART blocks. The clock source for the UART block is configured to receive a clock from an external pin by default. An internal 25MHz clock in the EG20T can also be used as a clock source for the clock. The MIPS based Boston platform ties the external clock pin down and relies on the internal clock source for the UART to function. Boston is based on device tree. Add a quirk to allow Boston to be detected via device tree and set the correct clock source for UART. Signed-off-by:

Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Signed-off-by:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/misc/pch_phub.c

+11 −0

Original line number	Diff line number	Diff line
		@@ -58,6 +58,7 @@

		/* CM-iTC */
		#define CLKCFG_UART_48MHZ (1 << 16)
		#define CLKCFG_UART_25MHZ (2 << 16)
		#define CLKCFG_BAUDDIV (2 << 20)
		#define CLKCFG_PLL2VCO (8 << 9)
		#define CLKCFG_UARTCLKSEL (1 << 18)
		@@ -748,6 +749,16 @@ static int pch_phub_probe(struct pci_dev *pdev,
		iowrite32(0x25, chip->pch_phub_base_address + 0x44);
		chip->pch_opt_rom_start_address = PCH_PHUB_ROM_START_ADDR_EG20T;
		chip->pch_mac_start_address = PCH_PHUB_MAC_START_ADDR_EG20T;

		/* quirk for MIPS Boston platform */
		if (pdev->dev.of_node) {
		if (of_machine_is_compatible("img,boston")) {
		pch_phub_read_modify_write_reg(chip,
		(unsigned int)CLKCFG_REG_OFFSET,
		CLKCFG_UART_25MHZ,
		CLKCFG_UART_MASK);
		}
		}
		} else if (id->driver_data == 2) { /* ML7213 IOH */
		ret = sysfs_create_bin_file(&pdev->dev.kobj, &pch_bin_attr);
		if (ret)

Admin message