+183
−101
+2
−0
+4
−47
Loading
Gitlab 现已全面支持 git over ssh 与 git over https。通过 HTTPS 访问请配置带有 read_repository / write_repository 权限的 Personal access token。通过 SSH 端口访问请使用 22 端口或 13389 端口。如果使用CAS注册了账户但不知道密码,可以自行至设置中更改;如有其他问题,请发邮件至 service@cra.moe 寻求协助。
The recommended HDA HW programming sequence for setting the DMA format requires that the link DMA and host DMA channels be coupled before setting the format. This change means that host DMA or link DMA channels be reserved even if only one is used. Statically assigned link DMA channels would mean that all the corresponding host DMA channels will need to be reserved, leaving only a few channels available at run-time. So, the suggestion here is to switch to dynamically assigning both host DMA channels and link DMA channels are run-time. The host DMA channel is assigned when the pcm is opened as before. While choosing the link DMA channel, if the host DMA channel corresponding to the link DMA channel is already taken, the proposed method checks to make sure that the BE is connected to the FE that has been assigned this host DMA channel. Once the link DMA channel is assigned, an IPC is sent to the DSP to set the link DMA channel. The link DMA channel is freed during hw_free() and also in the SUSPEND trigger callback. It will be re-assigned when hw_params are set upon resume. Signed-off-by:Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by:
Mark Brown <broonie@kernel.org>
CRA Git | Maintained and supported by SUSTech CRA and CCSE