Commit bc3875f1 authored by Lothar Waßmann's avatar Lothar Waßmann Committed by Shawn Guo
Browse files

ARM: dts: mxs: modify mx23/mx28 dts files to use pinctrl headers 



Convert mx23/mx28 dts filed to use the pinctrl header files.

NOTE: During automatic conversion of these files to use the pinconfig
definitions an inconsistency has been found in:
arch/arm/boot/dts/imx28-apx4devkit.dts

According to the comment the function for pad SSP2_SS0 should have
been MX28_PAD_SSP2_SS0__GPIO_2_19, while the given value 0x2131
represents: MX28_PAD_SSP2_SS0__AUART3_TX

I used the later (though probably wrong) definition because that's
what is actually being used in the DTB.

Signed-off-by: default avatarLothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: default avatarShawn Guo <shawn.guo@linaro.org>
parent ff04b401

arch/arm/boot/dts/imx23-evk.dts

+5 −5
Original line number Diff line number Diff line
@@ -10,7 +10,7 @@ 
 */



/dts-v1/;

/include/ "imx23.dtsi"

#include "imx23.dtsi"



/ {

	model = "Freescale i.MX23 Evaluation Kit";
@@ -45,10 +45,10 @@ 
				hog_pins_a: hog@0 {

					reg = <0>;

					fsl,pinmux-ids = <

						0x1123 /* MX23_PAD_LCD_RESET__GPIO_1_18 */

						0x11d3 /* MX23_PAD_PWM3__GPIO_1_29 */

						0x11e3 /* MX23_PAD_PWM4__GPIO_1_30 */

						0x2010 /* MX23_PAD_SSP1_DETECT__SSP1_DETECT */

						MX23_PAD_LCD_RESET__GPIO_1_18

						MX23_PAD_PWM3__GPIO_1_29

						MX23_PAD_PWM4__GPIO_1_30

						MX23_PAD_SSP1_DETECT__SSP1_DETECT

					>;

					fsl,drive-strength = <0>;

					fsl,voltage = <1>;

arch/arm/boot/dts/imx23-olinuxino.dts

+3 −3
Original line number Diff line number Diff line
@@ -12,7 +12,7 @@ 
 */



/dts-v1/;

/include/ "imx23.dtsi"

#include "imx23.dtsi"



/ {

	model = "i.MX23 Olinuxino Low Cost Board";
@@ -40,7 +40,7 @@ 
				hog_pins_a: hog@0 {

					reg = <0>;

					fsl,pinmux-ids = <

						0x0113 /* MX23_PAD_GPMI_ALE__GPIO_0_17 */

						MX23_PAD_GPMI_ALE__GPIO_0_17

					>;

					fsl,drive-strength = <0>;

					fsl,voltage = <1>;
@@ -50,7 +50,7 @@ 
				led_pin_gpio2_1: led_gpio2_1@0 {

					reg = <0>;

					fsl,pinmux-ids = <

						0x2013 /* MX23_PAD_SSP1_DETECT__GPIO_2_1 */

						MX23_PAD_SSP1_DETECT__GPIO_2_1

					>;

					fsl,drive-strength = <0>;

					fsl,voltage = <1>;

arch/arm/boot/dts/imx23-stmp378x_devb.dts

+3 −3
Original line number Diff line number Diff line
@@ -10,7 +10,7 @@ 
 */



/dts-v1/;

/include/ "imx23.dtsi"

#include "imx23.dtsi"



/ {

	model = "Freescale STMP378x Development Board";
@@ -39,8 +39,8 @@ 
				hog_pins_a: hog@0 {

					reg = <0>;

					fsl,pinmux-ids = <

						0x11d3 /* MX23_PAD_PWM3__GPIO_1_29 */

						0x11e3 /* MX23_PAD_PWM4__GPIO_1_30 */

						MX23_PAD_PWM3__GPIO_1_29

						MX23_PAD_PWM4__GPIO_1_30

					>;

					fsl,drive-strength = <0>;

					fsl,voltage = <1>;

arch/arm/boot/dts/imx23.dtsi

+82 −81
Original line number Diff line number Diff line
@@ -9,7 +9,8 @@ 
 * http://www.gnu.org/copyleft/gpl.html

 */



/include/ "skeleton.dtsi"

#include "skeleton.dtsi"

#include "imx23-pinfunc.h"



/ {

	interrupt-parent = <&icoll>;
@@ -137,8 +138,8 @@ 
				duart_pins_a: duart@0 {

					reg = <0>;

					fsl,pinmux-ids = <

						0x11a2 /* MX23_PAD_PWM0__DUART_RX */

						0x11b2 /* MX23_PAD_PWM1__DUART_TX */

						MX23_PAD_PWM0__DUART_RX

						MX23_PAD_PWM1__DUART_TX

					>;

					fsl,drive-strength = <0>;

					fsl,voltage = <1>;
@@ -148,10 +149,10 @@ 
				auart0_pins_a: auart0@0 {

					reg = <0>;

					fsl,pinmux-ids = <

						0x01c0 /* MX23_PAD_AUART1_RX__AUART1_RX */

						0x01d0 /* MX23_PAD_AUART1_TX__AUART1_TX */

						0x01a0 /* MX23_PAD_AUART1_CTS__AUART1_CTS */

						0x01b0 /* MX23_PAD_AUART1_RTS__AUART1_RTS */

						MX23_PAD_AUART1_RX__AUART1_RX

						MX23_PAD_AUART1_TX__AUART1_TX

						MX23_PAD_AUART1_CTS__AUART1_CTS

						MX23_PAD_AUART1_RTS__AUART1_RTS

					>;

					fsl,drive-strength = <0>;

					fsl,voltage = <1>;
@@ -161,8 +162,8 @@ 
				auart0_2pins_a: auart0-2pins@0 {

					reg = <0>;

					fsl,pinmux-ids = <

						0x01e2 /* MX23_PAD_I2C_SCL__AUART1_TX */

						0x01f2 /* MX23_PAD_I2C_SDA__AUART1_RX */

						MX23_PAD_I2C_SCL__AUART1_TX

						MX23_PAD_I2C_SDA__AUART1_RX

					>;

					fsl,drive-strength = <0>;

					fsl,voltage = <1>;
@@ -172,23 +173,23 @@ 
				gpmi_pins_a: gpmi-nand@0 {

					reg = <0>;

					fsl,pinmux-ids = <

						0x0000 /* MX23_PAD_GPMI_D00__GPMI_D00 */

						0x0010 /* MX23_PAD_GPMI_D01__GPMI_D01 */

						0x0020 /* MX23_PAD_GPMI_D02__GPMI_D02 */

						0x0030 /* MX23_PAD_GPMI_D03__GPMI_D03 */

						0x0040 /* MX23_PAD_GPMI_D04__GPMI_D04 */

						0x0050 /* MX23_PAD_GPMI_D05__GPMI_D05 */

						0x0060 /* MX23_PAD_GPMI_D06__GPMI_D06 */

						0x0070 /* MX23_PAD_GPMI_D07__GPMI_D07 */

						0x0100 /* MX23_PAD_GPMI_CLE__GPMI_CLE */

						0x0110 /* MX23_PAD_GPMI_ALE__GPMI_ALE */

						0x0130 /* MX23_PAD_GPMI_RDY0__GPMI_RDY0 */

						0x0140 /* MX23_PAD_GPMI_RDY1__GPMI_RDY1 */

						0x0170 /* MX23_PAD_GPMI_WPN__GPMI_WPN */

						0x0180 /* MX23_PAD_GPMI_WRN__GPMI_WRN */

						0x0190 /* MX23_PAD_GPMI_RDN__GPMI_RDN */

						0x21b0 /* MX23_PAD_GPMI_CE1N__GPMI_CE1N */

						0x21c0 /* MX23_PAD_GPMI_CE0N__GPMI_CE0N	*/

						MX23_PAD_GPMI_D00__GPMI_D00

						MX23_PAD_GPMI_D01__GPMI_D01

						MX23_PAD_GPMI_D02__GPMI_D02

						MX23_PAD_GPMI_D03__GPMI_D03

						MX23_PAD_GPMI_D04__GPMI_D04

						MX23_PAD_GPMI_D05__GPMI_D05

						MX23_PAD_GPMI_D06__GPMI_D06

						MX23_PAD_GPMI_D07__GPMI_D07

						MX23_PAD_GPMI_CLE__GPMI_CLE

						MX23_PAD_GPMI_ALE__GPMI_ALE

						MX23_PAD_GPMI_RDY0__GPMI_RDY0

						MX23_PAD_GPMI_RDY1__GPMI_RDY1

						MX23_PAD_GPMI_WPN__GPMI_WPN

						MX23_PAD_GPMI_WRN__GPMI_WRN

						MX23_PAD_GPMI_RDN__GPMI_RDN

						MX23_PAD_GPMI_CE1N__GPMI_CE1N

						MX23_PAD_GPMI_CE0N__GPMI_CE0N

					>;

					fsl,drive-strength = <0>;

					fsl,voltage = <1>;
@@ -197,9 +198,9 @@ 


				gpmi_pins_fixup: gpmi-pins-fixup {

					fsl,pinmux-ids = <

						0x0170 /* MX23_PAD_GPMI_WPN__GPMI_WPN */

						0x0180 /* MX23_PAD_GPMI_WRN__GPMI_WRN */

						0x0190 /* MX23_PAD_GPMI_RDN__GPMI_RDN */

						MX23_PAD_GPMI_WPN__GPMI_WPN

						MX23_PAD_GPMI_WRN__GPMI_WRN

						MX23_PAD_GPMI_RDN__GPMI_RDN

					>;

					fsl,drive-strength = <2>;

				};
@@ -207,12 +208,12 @@ 
				mmc0_4bit_pins_a: mmc0-4bit@0 {

					reg = <0>;

					fsl,pinmux-ids = <

						0x2020 /* MX23_PAD_SSP1_DATA0__SSP1_DATA0 */

						0x2030 /* MX23_PAD_SSP1_DATA1__SSP1_DATA1 */

						0x2040 /* MX23_PAD_SSP1_DATA2__SSP1_DATA2 */

						0x2050 /* MX23_PAD_SSP1_DATA3__SSP1_DATA3 */

						0x2000 /* MX23_PAD_SSP1_CMD__SSP1_CMD */

						0x2060 /* MX23_PAD_SSP1_SCK__SSP1_SCK */

						MX23_PAD_SSP1_DATA0__SSP1_DATA0

						MX23_PAD_SSP1_DATA1__SSP1_DATA1

						MX23_PAD_SSP1_DATA2__SSP1_DATA2

						MX23_PAD_SSP1_DATA3__SSP1_DATA3

						MX23_PAD_SSP1_CMD__SSP1_CMD

						MX23_PAD_SSP1_SCK__SSP1_SCK

					>;

					fsl,drive-strength = <1>;

					fsl,voltage = <1>;
@@ -222,17 +223,17 @@ 
				mmc0_8bit_pins_a: mmc0-8bit@0 {

					reg = <0>;

					fsl,pinmux-ids = <

						0x2020 /* MX23_PAD_SSP1_DATA0__SSP1_DATA0 */

						0x2030 /* MX23_PAD_SSP1_DATA1__SSP1_DATA1 */

						0x2040 /* MX23_PAD_SSP1_DATA2__SSP1_DATA2 */

						0x2050 /* MX23_PAD_SSP1_DATA3__SSP1_DATA3 */

						0x0082 /* MX23_PAD_GPMI_D08__SSP1_DATA4 */

						0x0092 /* MX23_PAD_GPMI_D09__SSP1_DATA5 */

						0x00a2 /* MX23_PAD_GPMI_D10__SSP1_DATA6 */

						0x00b2 /* MX23_PAD_GPMI_D11__SSP1_DATA7 */

						0x2000 /* MX23_PAD_SSP1_CMD__SSP1_CMD */

						0x2010 /* MX23_PAD_SSP1_DETECT__SSP1_DETECT */

						0x2060 /* MX23_PAD_SSP1_SCK__SSP1_SCK */

						MX23_PAD_SSP1_DATA0__SSP1_DATA0

						MX23_PAD_SSP1_DATA1__SSP1_DATA1

						MX23_PAD_SSP1_DATA2__SSP1_DATA2

						MX23_PAD_SSP1_DATA3__SSP1_DATA3

						MX23_PAD_GPMI_D08__SSP1_DATA4

						MX23_PAD_GPMI_D09__SSP1_DATA5

						MX23_PAD_GPMI_D10__SSP1_DATA6

						MX23_PAD_GPMI_D11__SSP1_DATA7

						MX23_PAD_SSP1_CMD__SSP1_CMD

						MX23_PAD_SSP1_DETECT__SSP1_DETECT

						MX23_PAD_SSP1_SCK__SSP1_SCK

					>;

					fsl,drive-strength = <1>;

					fsl,voltage = <1>;
@@ -241,8 +242,8 @@ 


				mmc0_pins_fixup: mmc0-pins-fixup {

					fsl,pinmux-ids = <

						0x2010 /* MX23_PAD_SSP1_DETECT__SSP1_DETECT */

						0x2060 /* MX23_PAD_SSP1_SCK__SSP1_SCK */

						MX23_PAD_SSP1_DETECT__SSP1_DETECT

						MX23_PAD_SSP1_SCK__SSP1_SCK

					>;

					fsl,pull-up = <0>;

				};
@@ -250,7 +251,7 @@ 
				pwm2_pins_a: pwm2@0 {

					reg = <0>;

					fsl,pinmux-ids = <

						0x11c0 /* MX23_PAD_PWM2__PWM2 */

						MX23_PAD_PWM2__PWM2

					>;

					fsl,drive-strength = <0>;

					fsl,voltage = <1>;
@@ -260,34 +261,34 @@ 
				lcdif_24bit_pins_a: lcdif-24bit@0 {

					reg = <0>;

					fsl,pinmux-ids = <

						0x1000 /* MX23_PAD_LCD_D00__LCD_D0 */

						0x1010 /* MX23_PAD_LCD_D01__LCD_D1 */

						0x1020 /* MX23_PAD_LCD_D02__LCD_D2 */

						0x1030 /* MX23_PAD_LCD_D03__LCD_D3 */

						0x1040 /* MX23_PAD_LCD_D04__LCD_D4 */

						0x1050 /* MX23_PAD_LCD_D05__LCD_D5 */

						0x1060 /* MX23_PAD_LCD_D06__LCD_D6 */

						0x1070 /* MX23_PAD_LCD_D07__LCD_D7 */

						0x1080 /* MX23_PAD_LCD_D08__LCD_D8 */

						0x1090 /* MX23_PAD_LCD_D09__LCD_D9 */

						0x10a0 /* MX23_PAD_LCD_D10__LCD_D10 */

						0x10b0 /* MX23_PAD_LCD_D11__LCD_D11 */

						0x10c0 /* MX23_PAD_LCD_D12__LCD_D12 */

						0x10d0 /* MX23_PAD_LCD_D13__LCD_D13 */

						0x10e0 /* MX23_PAD_LCD_D14__LCD_D14 */

						0x10f0 /* MX23_PAD_LCD_D15__LCD_D15 */

						0x1100 /* MX23_PAD_LCD_D16__LCD_D16 */

						0x1110 /* MX23_PAD_LCD_D17__LCD_D17 */

						0x0081 /* MX23_PAD_GPMI_D08__LCD_D18 */

						0x0091 /* MX23_PAD_GPMI_D09__LCD_D19 */

						0x00a1 /* MX23_PAD_GPMI_D10__LCD_D20 */

						0x00b1 /* MX23_PAD_GPMI_D11__LCD_D21 */

						0x00c1 /* MX23_PAD_GPMI_D12__LCD_D22 */

						0x00d1 /* MX23_PAD_GPMI_D13__LCD_D23 */

						0x1160 /* MX23_PAD_LCD_DOTCK__LCD_DOTCK */

						0x1170 /* MX23_PAD_LCD_ENABLE__LCD_ENABLE */

						0x1180 /* MX23_PAD_LCD_HSYNC__LCD_HSYNC */

						0x1190 /* MX23_PAD_LCD_VSYNC__LCD_VSYNC */

						MX23_PAD_LCD_D00__LCD_D00

						MX23_PAD_LCD_D01__LCD_D01

						MX23_PAD_LCD_D02__LCD_D02

						MX23_PAD_LCD_D03__LCD_D03

						MX23_PAD_LCD_D04__LCD_D04

						MX23_PAD_LCD_D05__LCD_D05

						MX23_PAD_LCD_D06__LCD_D06

						MX23_PAD_LCD_D07__LCD_D07

						MX23_PAD_LCD_D08__LCD_D08

						MX23_PAD_LCD_D09__LCD_D09

						MX23_PAD_LCD_D10__LCD_D10

						MX23_PAD_LCD_D11__LCD_D11

						MX23_PAD_LCD_D12__LCD_D12

						MX23_PAD_LCD_D13__LCD_D13

						MX23_PAD_LCD_D14__LCD_D14

						MX23_PAD_LCD_D15__LCD_D15

						MX23_PAD_LCD_D16__LCD_D16

						MX23_PAD_LCD_D17__LCD_D17

						MX23_PAD_GPMI_D08__LCD_D18

						MX23_PAD_GPMI_D09__LCD_D19

						MX23_PAD_GPMI_D10__LCD_D20

						MX23_PAD_GPMI_D11__LCD_D21

						MX23_PAD_GPMI_D12__LCD_D22

						MX23_PAD_GPMI_D13__LCD_D23

						MX23_PAD_LCD_DOTCK__LCD_DOTCK

						MX23_PAD_LCD_ENABLE__LCD_ENABLE

						MX23_PAD_LCD_HSYNC__LCD_HSYNC

						MX23_PAD_LCD_VSYNC__LCD_VSYNC

					>;

					fsl,drive-strength = <0>;

					fsl,voltage = <1>;
@@ -297,10 +298,10 @@ 
				spi2_pins_a: spi2@0 {

					reg = <0>;

					fsl,pinmux-ids = <

						0x0182 /* MX23_PAD_GPMI_WRN__SSP2_SCK */

						0x0142 /* MX23_PAD_GPMI_RDY1__SSP2_CMD */

						0x0002 /* MX23_PAD_GPMI_D00__SSP2_DATA0 */

						0x0032 /* MX23_PAD_GPMI_D03__SSP2_DATA3 */

						MX23_PAD_GPMI_WRN__SSP2_SCK

						MX23_PAD_GPMI_RDY1__SSP2_CMD

						MX23_PAD_GPMI_D00__SSP2_DATA0

						MX23_PAD_GPMI_D03__SSP2_DATA3

					>;

					fsl,drive-strength = <1>;

					fsl,voltage = <1>;

arch/arm/boot/dts/imx28-apf28.dts

+1 −1
Original line number Diff line number Diff line
@@ -10,7 +10,7 @@ 
 */



/dts-v1/;

/include/ "imx28.dtsi"

#include "imx28.dtsi"



/ {

	model = "Armadeus Systems APF28 module";

CRA Git | Maintained and supported by SUSTech CRA and CCSE