ARM: dts: sun4i: Add dts file for iNet-1 based tablets

	sun4i-a10-gemei-g9.dtb \

	sun4i-a10-hackberry.dtb \

	sun4i-a10-hyundai-a7hd.dtb \

	sun4i-a10-inet1.dtb \

	sun4i-a10-inet97fv2.dtb \

	sun4i-a10-inet9f-rev03.dtb \

	sun4i-a10-itead-iteaduino-plus.dtb \

/*

 * Copyright 2015 Hans de Goede <hdegoede@redhat.com>

 *

 * This file is dual-licensed: you can use it either under the terms

 * of the GPL or the X11 license, at your option. Note that this dual

 * licensing only applies to this file, and not this project as a

 * whole.

 *

 *  a) This file is free software; you can redistribute it and/or

 *     modify it under the terms of the GNU General Public License as

 *     published by the Free Software Foundation; either version 2 of the

 *     License, or (at your option) any later version.

 *

 *     This file is distributed in the hope that it will be useful,

 *     but WITHOUT ANY WARRANTY; without even the implied warranty of

 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 *     GNU General Public License for more details.

 *

 * Or, alternatively,

 *

 *  b) Permission is hereby granted, free of charge, to any person

 *     obtaining a copy of this software and associated documentation

 *     files (the "Software"), to deal in the Software without

 *     restriction, including without limitation the rights to use,

 *     copy, modify, merge, publish, distribute, sublicense, and/or

 *     sell copies of the Software, and to permit persons to whom the

 *     Software is furnished to do so, subject to the following

 *     conditions:

 *

 *     The above copyright notice and this permission notice shall be

 *     included in all copies or substantial portions of the Software.

 *

 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,

 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES

 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND

 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT

 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,

 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING

 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR

 *     OTHER DEALINGS IN THE SOFTWARE.

 */

/dts-v1/;

#include "sun4i-a10.dtsi"

#include "sunxi-common-regulators.dtsi"

#include <dt-bindings/gpio/gpio.h>

#include <dt-bindings/input/input.h>

#include <dt-bindings/interrupt-controller/irq.h>

#include <dt-bindings/pinctrl/sun4i-a10.h>

/ {

	model = "iNet-1";

	compatible = "inet-tek,inet1", "allwinner,sun4i-a10";

	aliases {

		serial0 = &uart0;

	};

	chosen {

		stdout-path = "serial0:115200n8";

	};

};

&cpu0 {

	cpu-supply = <&reg_dcdc2>;

};

&ehci0  {

	status = "okay";

};

&ehci1 {

	status = "okay";

};

&i2c0 {

	pinctrl-names = "default";

	pinctrl-0 = <&i2c0_pins_a>;

	status = "okay";

	axp209: pmic@34 {

		reg = <0x34>;

		interrupts = <0>;

	};

};

#include "axp209.dtsi"

&i2c1 {

	pinctrl-names = "default";

	pinctrl-0 = <&i2c1_pins_a>;

	status = "okay";

	/* Accelerometer */

	bma250@18 {

		compatible = "bosch,bma250";

		reg = <0x18>;

		interrupt-parent = <&pio>;

		interrupts = <7 0 IRQ_TYPE_EDGE_RISING>; /* PH0 / EINT0 */

	};

};

&i2c2 {

	pinctrl-names = "default";

	pinctrl-0 = <&i2c2_pins_a>;

	status = "okay";

};

&lradc {

	vref-supply = <&reg_ldo2>;

	status = "okay";

	button@200 {

		label = "Volume Up";

		linux,code = <KEY_VOLUMEUP>;

		channel = <0>;

		voltage = <200000>;

	};

	button@1000 {

		label = "Volume Down";

		linux,code = <KEY_VOLUMEDOWN>;

		channel = <0>;

		voltage = <1000000>;

	};

	button@1200 {

		label = "Home";

		linux,code = <KEY_HOMEPAGE>;

		channel = <0>;

		voltage = <1200000>;

	};

};

&mmc0 {

	pinctrl-names = "default";

	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;

	vmmc-supply = <&reg_vcc3v3>;

	bus-width = <4>;

	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */

	cd-inverted;

	status = "okay";

};

&ohci0  {

	status = "okay";

};

&otg_sram {

	status = "okay";

};

&pio {

	usb0_id_detect_pin: usb0_id_detect_pin@0 {

		allwinner,pins = "PH4";

		allwinner,function = "gpio_in";

		allwinner,drive = <SUN4I_PINCTRL_10_MA>;

		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;

	};

	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {

		allwinner,pins = "PH5";

		allwinner,function = "gpio_in";

		allwinner,drive = <SUN4I_PINCTRL_10_MA>;

		allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;

	};

};

&reg_dcdc2 {

	regulator-always-on;

	regulator-min-microvolt = <1000000>;

	regulator-max-microvolt = <1400000>;

	regulator-name = "vdd-cpu";

};

&reg_dcdc3 {

	regulator-always-on;

	regulator-min-microvolt = <1250000>;

	regulator-max-microvolt = <1250000>;

	regulator-name = "vdd-int-dll";

};

&reg_ldo1 {

	regulator-name = "vdd-rtc";

};

&reg_ldo2 {

	regulator-always-on;

	regulator-min-microvolt = <3000000>;

	regulator-max-microvolt = <3000000>;

	regulator-name = "avcc";

};

&reg_usb0_vbus {

	status = "okay";

};

&reg_usb1_vbus {

	status = "okay";

};

&reg_usb2_vbus {

	status = "okay";

};

&uart0 {

	pinctrl-names = "default";

	pinctrl-0 = <&uart0_pins_a>;

	status = "okay";

};

&usb_otg {

	dr_mode = "otg";

	status = "okay";

};

&usbphy {

	pinctrl-names = "default";

	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;

	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */

	usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */

	usb0_vbus-supply = <&reg_usb0_vbus>;

	usb1_vbus-supply = <&reg_usb1_vbus>;

	usb2_vbus-supply = <&reg_usb2_vbus>;

	status = "okay";

};