Commit b8f8be3f authored by David S. Miller's avatar David S. Miller
Browse files

Merge tag 'nfc-next-3.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/nfc-next 



NFC: 3.20 first pull request

This is the first NFC pull request for 3.20.

With this one we have:

- Secure element support for the ST Micro st21nfca driver. This depends
  on a few HCI internal changes in order for example to support more
  than one secure element per controller.

- ACPI support for NXP's pn544 HCI driver. This controller is found on
  many x86 SoCs and is typically enumerated on the ACPI bus there.

- A few st21nfca and st21nfcb fixes.

Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parents ff660f75 0a5942c8

Documentation/devicetree/bindings/net/nfc/st21nfca.txt

+9 −2
Original line number Diff line number Diff line 
* STMicroelectronics SAS. ST21NFCA NFC Controller



Required properties:

- compatible: Should be "st,st21nfca_i2c".

- compatible: Should be "st,st21nfca-i2c".

- clock-frequency: I²C work frequency.

- reg: address on the bus

- interrupt-parent: phandle for the interrupt gpio controller
@@ -11,6 +11,10 @@ Required properties: 
Optional SoC Specific Properties:

- pinctrl-names: Contains only one value - "default".

- pintctrl-0: Specifies the pin control groups used for this controller.

- ese-present: Specifies that an ese is physically connected to the nfc

controller.

- uicc-present: Specifies that the uicc swp signal can be physically

connected to the nfc controller.



Example (for ARM-based BeagleBoard xM with ST21NFCA on I2C2):
@@ -20,7 +24,7 @@ Example (for ARM-based BeagleBoard xM with ST21NFCA on I2C2): 


	st21nfca: st21nfca@1 {



		compatible = "st,st21nfca_i2c";

		compatible = "st,st21nfca-i2c";



		reg = <0x01>;

		clock-frequency = <400000>;
@@ -29,5 +33,8 @@ Example (for ARM-based BeagleBoard xM with ST21NFCA on I2C2): 
		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;



		enable-gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;



		ese-present;

		uicc-present;

	};

};

Documentation/devicetree/bindings/net/nfc/st21nfcb.txt

+2 −2
Original line number Diff line number Diff line 
* STMicroelectronics SAS. ST21NFCB NFC Controller



Required properties:

- compatible: Should be "st,st21nfcb_i2c".

- compatible: Should be "st,st21nfcb-i2c".

- clock-frequency: I²C work frequency.

- reg: address on the bus

- interrupt-parent: phandle for the interrupt gpio controller
@@ -20,7 +20,7 @@ Example (for ARM-based BeagleBoard xM with ST21NFCB on I2C2): 


	st21nfcb: st21nfcb@8 {



		compatible = "st,st21nfcb_i2c";

		compatible = "st,st21nfcb-i2c";



		reg = <0x08>;

		clock-frequency = <400000>;

drivers/nfc/microread/microread.c

+2 −1
Original line number Diff line number Diff line
@@ -557,10 +557,11 @@ exit: 
		pr_err("Failed to handle discovered target err=%d\n", r);

}



static int microread_event_received(struct nfc_hci_dev *hdev, u8 gate,

static int microread_event_received(struct nfc_hci_dev *hdev, u8 pipe,

				     u8 event, struct sk_buff *skb)

{

	int r;

	u8 gate = hdev->pipes[pipe].gate;

	u8 mode;



	pr_info("Microread received event 0x%x to gate 0x%x\n", event, gate);

drivers/nfc/pn544/i2c.c

+121 −12
Original line number Diff line number Diff line
@@ -24,11 +24,13 @@ 
#include <linux/gpio.h>

#include <linux/of_gpio.h>

#include <linux/of_irq.h>

#include <linux/acpi.h>

#include <linux/miscdevice.h>

#include <linux/interrupt.h>

#include <linux/delay.h>

#include <linux/nfc.h>

#include <linux/firmware.h>

#include <linux/gpio/consumer.h>

#include <linux/platform_data/pn544.h>

#include <asm/unaligned.h>
@@ -41,6 +43,11 @@ 
#define PN544_I2C_FRAME_HEADROOM 1

#define PN544_I2C_FRAME_TAILROOM 2



/* GPIO names */

#define PN544_GPIO_NAME_IRQ "pn544_irq"

#define PN544_GPIO_NAME_FW  "pn544_fw"

#define PN544_GPIO_NAME_EN  "pn544_en"



/* framing in HCI mode */

#define PN544_HCI_I2C_LLC_LEN		1

#define PN544_HCI_I2C_LLC_CRC		2
@@ -58,6 +65,13 @@ static struct i2c_device_id pn544_hci_i2c_id_table[] = { 


MODULE_DEVICE_TABLE(i2c, pn544_hci_i2c_id_table);



static const struct acpi_device_id pn544_hci_i2c_acpi_match[] = {

	{"NXP5440", 0},

	{}

};



MODULE_DEVICE_TABLE(acpi, pn544_hci_i2c_acpi_match);



#define PN544_HCI_I2C_DRIVER_NAME "pn544_hci_i2c"



/*
@@ -195,18 +209,19 @@ static void pn544_hci_i2c_platform_init(struct pn544_i2c_phy *phy) 
	nfc_info(&phy->i2c_dev->dev, "Detecting nfc_en polarity\n");



	/* Disable fw download */

	gpio_set_value(phy->gpio_fw, 0);

	gpio_set_value_cansleep(phy->gpio_fw, 0);



	for (polarity = 0; polarity < 2; polarity++) {

		phy->en_polarity = polarity;

		retry = 3;

		while (retry--) {

			/* power off */

			gpio_set_value(phy->gpio_en, !phy->en_polarity);

			gpio_set_value_cansleep(phy->gpio_en,

						!phy->en_polarity);

			usleep_range(10000, 15000);



			/* power on */

			gpio_set_value(phy->gpio_en, phy->en_polarity);

			gpio_set_value_cansleep(phy->gpio_en, phy->en_polarity);

			usleep_range(10000, 15000);



			/* send reset */
@@ -225,13 +240,14 @@ static void pn544_hci_i2c_platform_init(struct pn544_i2c_phy *phy) 
		"Could not detect nfc_en polarity, fallback to active high\n");



out:

	gpio_set_value(phy->gpio_en, !phy->en_polarity);

	gpio_set_value_cansleep(phy->gpio_en, !phy->en_polarity);

}



static void pn544_hci_i2c_enable_mode(struct pn544_i2c_phy *phy, int run_mode)

{

	gpio_set_value(phy->gpio_fw, run_mode == PN544_FW_MODE ? 1 : 0);

	gpio_set_value(phy->gpio_en, phy->en_polarity);

	gpio_set_value_cansleep(phy->gpio_fw,

				run_mode == PN544_FW_MODE ? 1 : 0);

	gpio_set_value_cansleep(phy->gpio_en, phy->en_polarity);

	usleep_range(10000, 15000);



	phy->run_mode = run_mode;
@@ -254,14 +270,14 @@ static void pn544_hci_i2c_disable(void *phy_id) 
{

	struct pn544_i2c_phy *phy = phy_id;



	gpio_set_value(phy->gpio_fw, 0);

	gpio_set_value(phy->gpio_en, !phy->en_polarity);

	gpio_set_value_cansleep(phy->gpio_fw, 0);

	gpio_set_value_cansleep(phy->gpio_en, !phy->en_polarity);

	usleep_range(10000, 15000);



	gpio_set_value(phy->gpio_en, phy->en_polarity);

	gpio_set_value_cansleep(phy->gpio_en, phy->en_polarity);

	usleep_range(10000, 15000);



	gpio_set_value(phy->gpio_en, !phy->en_polarity);

	gpio_set_value_cansleep(phy->gpio_en, !phy->en_polarity);

	usleep_range(10000, 15000);



	phy->powered = 0;
@@ -859,6 +875,90 @@ exit_state_wait_secure_write_answer: 
	}

}



static int pn544_hci_i2c_acpi_request_resources(struct i2c_client *client)

{

	struct pn544_i2c_phy *phy = i2c_get_clientdata(client);

	const struct acpi_device_id *id;

	struct gpio_desc *gpiod_en, *gpiod_irq, *gpiod_fw;

	struct device *dev;

	int ret;



	if (!client)

		return -EINVAL;



	dev = &client->dev;



	/* Match the struct device against a given list of ACPI IDs */

	id = acpi_match_device(dev->driver->acpi_match_table, dev);



	if (!id)

		return -ENODEV;



	/* Get EN GPIO from ACPI */

	gpiod_en = devm_gpiod_get_index(dev, PN544_GPIO_NAME_EN, 1);

	if (IS_ERR(gpiod_en)) {

		nfc_err(dev,

			"Unable to get EN GPIO\n");

		return -ENODEV;

	}



	phy->gpio_en  = desc_to_gpio(gpiod_en);



	/* Configuration EN GPIO */

	ret = gpiod_direction_output(gpiod_en, 0);

	if (ret) {

		nfc_err(dev, "Fail EN pin direction\n");

		return ret;

	}



	/* Get FW GPIO from ACPI */

	gpiod_fw = devm_gpiod_get_index(dev, PN544_GPIO_NAME_FW, 2);

	if (IS_ERR(gpiod_fw)) {

		nfc_err(dev,

			"Unable to get FW GPIO\n");

		return -ENODEV;

	}



	phy->gpio_fw  = desc_to_gpio(gpiod_fw);



	/* Configuration FW GPIO */

	ret = gpiod_direction_output(gpiod_fw, 0);

	if (ret) {

		nfc_err(dev, "Fail FW pin direction\n");

		return ret;

	}



	/* Get IRQ GPIO */

	gpiod_irq = devm_gpiod_get_index(dev, PN544_GPIO_NAME_IRQ, 0);

	if (IS_ERR(gpiod_irq)) {

		nfc_err(dev,

			"Unable to get IRQ GPIO\n");

		return -ENODEV;

	}



	phy->gpio_irq = desc_to_gpio(gpiod_irq);



	/* Configure IRQ GPIO */

	ret = gpiod_direction_input(gpiod_irq);

	if (ret) {

		nfc_err(dev, "Fail IRQ pin direction\n");

		return ret;

	}



	/* Map the pin to an IRQ */

	ret = gpiod_to_irq(gpiod_irq);

	if (ret < 0) {

		nfc_err(dev, "Fail pin IRQ mapping\n");

		return ret;

	}



	nfc_info(dev, "GPIO resource, no:%d irq:%d\n",

			desc_to_gpio(gpiod_irq), ret);

	client->irq = ret;



	return 0;

}



#ifdef CONFIG_OF



static int pn544_hci_i2c_of_request_resources(struct i2c_client *client)
@@ -884,7 +984,7 @@ static int pn544_hci_i2c_of_request_resources(struct i2c_client *client) 
	phy->gpio_en = ret;



	/* Configuration of EN GPIO */

	ret = gpio_request(phy->gpio_en, "pn544_en");

	ret = gpio_request(phy->gpio_en, PN544_GPIO_NAME_EN);

	if (ret) {

		nfc_err(&client->dev, "Fail EN pin\n");

		goto err_dt;
@@ -906,7 +1006,7 @@ static int pn544_hci_i2c_of_request_resources(struct i2c_client *client) 
	phy->gpio_fw = ret;



	/* Configuration of FW GPIO */

	ret = gpio_request(phy->gpio_fw, "pn544_fw");

	ret = gpio_request(phy->gpio_fw, PN544_GPIO_NAME_FW);

	if (ret) {

		nfc_err(&client->dev, "Fail FW pin\n");

		goto err_gpio_en;
@@ -1001,6 +1101,14 @@ static int pn544_hci_i2c_probe(struct i2c_client *client, 
		phy->gpio_en = pdata->get_gpio(NFC_GPIO_ENABLE);

		phy->gpio_fw = pdata->get_gpio(NFC_GPIO_FW_RESET);

		phy->gpio_irq = pdata->get_gpio(NFC_GPIO_IRQ);

	/* Using ACPI */

	} else if (ACPI_HANDLE(&client->dev)) {

		r = pn544_hci_i2c_acpi_request_resources(client);

		if (r) {

			nfc_err(&client->dev,

				"Cannot get ACPI data\n");

			return r;

		}

	} else {

		nfc_err(&client->dev, "No platform data\n");

		return -EINVAL;
@@ -1080,6 +1188,7 @@ static struct i2c_driver pn544_hci_i2c_driver = { 
		   .name = PN544_HCI_I2C_DRIVER_NAME,

		   .owner  = THIS_MODULE,

		   .of_match_table = of_match_ptr(of_pn544_i2c_match),

		   .acpi_match_table = ACPI_PTR(pn544_hci_i2c_acpi_match),

		  },

	.probe = pn544_hci_i2c_probe,

	.id_table = pn544_hci_i2c_id_table,

drivers/nfc/pn544/pn544.c

+2 −1
Original line number Diff line number Diff line
@@ -724,10 +724,11 @@ static int pn544_hci_check_presence(struct nfc_hci_dev *hdev, 
 * <= 0: driver handled the event, skb consumed

 *    1: driver does not handle the event, please do standard processing

 */

static int pn544_hci_event_received(struct nfc_hci_dev *hdev, u8 gate, u8 event,

static int pn544_hci_event_received(struct nfc_hci_dev *hdev, u8 pipe, u8 event,

				    struct sk_buff *skb)

{

	struct sk_buff *rgb_skb = NULL;

	u8 gate = hdev->pipes[pipe].gate;

	int r;



	pr_debug("hci event %d\n", event);

CRA Git | Maintained and supported by SUSTech CRA and CCSE