Commit b84aeb03 authored by Mauro Carvalho Chehab's avatar Mauro Carvalho Chehab
Browse files

[media] v4l2-subdev: reorder the v4l2_subdev_video_ops comments 



The comments for struct v4l2_subdev_video_ops are out of the
order as the parameter would appear at struct. This is not
a problem for DocBook, but humans find harder to mentally
reorder ;)

So, put them at the right order. That makes easier to check
what's missing, and to put the comments in the right place.

Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@osg.samsung.com>
Acked-by: default avatarJonathan Corbet <corbet@lwn.net>
parent 91963aae

include/media/v4l2-subdev.h

+10 −8
Original line number Diff line number Diff line
@@ -309,6 +309,15 @@ struct v4l2_mbus_frame_desc { 
/**

 * struct v4l2_subdev_video_ops - Callbacks used when v4l device was opened

 * 				  in video mode.

 *

 * @s_routing: see s_routing in audio_ops, except this version is for video

 *	devices.

 *

 * @s_crystal_freq: sets the frequency of the crystal used to generate the

 *	clocks in Hz. An extra flags field allows device specific configuration

 *	regarding clock frequency dividers, etc. If not used, then set flags

 *	to 0. If the frequency is not supported, then -EINVAL is returned.

 *

 * @s_std_output: set v4l2_std_id for video OUTPUT devices. This is ignored by

 *	video input devices.

 *
@@ -321,22 +330,15 @@ struct v4l2_mbus_frame_desc { 
 * @g_tvnorms_output: get v4l2_std_id with all standards supported by the video

 *	OUTPUT device. This is ignored by video capture devices.

 *

 * @s_crystal_freq: sets the frequency of the crystal used to generate the

 *	clocks in Hz. An extra flags field allows device specific configuration

 *	regarding clock frequency dividers, etc. If not used, then set flags

 *	to 0. If the frequency is not supported, then -EINVAL is returned.

 *

 * @g_input_status: get input status. Same as the status field in the v4l2_input

 *	struct.

 *

 * @s_routing: see s_routing in audio_ops, except this version is for video

 *	devices.

 *

 * @s_dv_timings(): Set custom dv timings in the sub device. This is used

 *	when sub device is capable of setting detailed timing information

 *	in the hardware to generate/detect the video signal.

 *

 * @g_dv_timings(): Get custom dv timings in the sub device.

 *

 * @g_mbus_config: get supported mediabus configurations

 *

 * @s_mbus_config: set a certain mediabus configuration. This operation is added

CRA Git | Maintained and supported by SUSTech CRA and CCSE