Commit b7b23ffc authored by Javier Martinez Canillas's avatar Javier Martinez Canillas Committed by Tony Lindgren
Browse files

ARM: OMAP2+: Remove legacy smsc911x and smc91x GPMC support 



When connecting an ethernet chip to the GPMC, such as smc91x
or smsc911x, a GPIO has to be requested to be used as an IRQ
and also the IO memory for a GPMC chip-select.

When booting with DT the chip-select allocation is handled
in a generic manner in the GPMC driver and the GPIO to IRQ
mapping is made by the DT core so this code is not needed
anymore now that mach-omap2 related boards are DT-only.

Signed-off-by: default avatarJavier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
parent d9d9cec0

arch/arm/mach-omap2/Makefile

+0 −2
Original line number Diff line number Diff line
@@ -249,7 +249,5 @@ obj-y += $(onenand-m) $(onenand-y) 
nand-$(CONFIG_MTD_NAND_OMAP2)		:= gpmc-nand.o

obj-y					+= $(nand-m) $(nand-y)



smsc911x-$(CONFIG_SMSC911X)		:= gpmc-smsc911x.o

obj-y					+= $(smsc911x-m) $(smsc911x-y)



obj-y					+= common-board-devices.o dss-common.o

arch/arm/mach-omap2/gpmc-smsc911x.c

deleted100644 → 0
+0 −100
Original line number Diff line number Diff line 
/*

 * linux/arch/arm/mach-omap2/gpmc-smsc911x.c

 *

 * Copyright (C) 2009 Li-Pro.Net

 * Stephan Linz <linz@li-pro.net>

 *

 * Modified from linux/arch/arm/mach-omap2/gpmc-smc91x.c

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 as

 * published by the Free Software Foundation.

 */

#define pr_fmt(fmt) "%s: " fmt, __func__



#include <linux/kernel.h>

#include <linux/platform_device.h>

#include <linux/gpio.h>

#include <linux/delay.h>

#include <linux/interrupt.h>

#include <linux/io.h>

#include <linux/smsc911x.h>



#include "gpmc.h"

#include "gpmc-smsc911x.h"



static struct resource gpmc_smsc911x_resources[] = {

	[0] = {

		.flags		= IORESOURCE_MEM,

	},

	[1] = {

		.flags		= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,

	},

};



static struct smsc911x_platform_config gpmc_smsc911x_config = {

	.phy_interface	= PHY_INTERFACE_MODE_MII,

	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,

	.irq_type	= SMSC911X_IRQ_TYPE_OPEN_DRAIN,

};



/*

 * Initialize smsc911x device connected to the GPMC. Note that we

 * assume that pin multiplexing is done in the board-*.c file,

 * or in the bootloader.

 */

void __init gpmc_smsc911x_init(struct omap_smsc911x_platform_data *gpmc_cfg)

{

	struct platform_device *pdev;

	unsigned long cs_mem_base;

	int ret;



	if (gpmc_cs_request(gpmc_cfg->cs, SZ_16M, &cs_mem_base) < 0) {

		pr_err("Failed to request GPMC mem region\n");

		return;

	}



	gpmc_smsc911x_resources[0].start = cs_mem_base + 0x0;

	gpmc_smsc911x_resources[0].end = cs_mem_base + 0xff;



	if (gpio_request_one(gpmc_cfg->gpio_irq, GPIOF_IN, "smsc911x irq")) {

		pr_err("Failed to request IRQ GPIO%d\n", gpmc_cfg->gpio_irq);

		goto free1;

	}



	gpmc_smsc911x_resources[1].start = gpio_to_irq(gpmc_cfg->gpio_irq);



	if (gpio_is_valid(gpmc_cfg->gpio_reset)) {

		ret = gpio_request_one(gpmc_cfg->gpio_reset,

				       GPIOF_OUT_INIT_HIGH, "smsc911x reset");

		if (ret) {

			pr_err("Failed to request reset GPIO%d\n",

			       gpmc_cfg->gpio_reset);

			goto free2;

		}



		gpio_set_value(gpmc_cfg->gpio_reset, 0);

		msleep(100);

		gpio_set_value(gpmc_cfg->gpio_reset, 1);

	}



	gpmc_smsc911x_config.flags = gpmc_cfg->flags ? : SMSC911X_USE_16BIT;



	pdev = platform_device_register_resndata(NULL, "smsc911x", gpmc_cfg->id,

		 gpmc_smsc911x_resources, ARRAY_SIZE(gpmc_smsc911x_resources),

		 &gpmc_smsc911x_config, sizeof(gpmc_smsc911x_config));

	if (IS_ERR(pdev)) {

		pr_err("Unable to register platform device\n");

		gpio_free(gpmc_cfg->gpio_reset);

		goto free2;

	}



	return;



free2:

	gpio_free(gpmc_cfg->gpio_irq);

free1:

	gpmc_cs_free(gpmc_cfg->cs);



	pr_err("Could not initialize smsc911x device\n");

}

arch/arm/mach-omap2/gpmc-smsc911x.h

deleted100644 → 0
+0 −35
Original line number Diff line number Diff line 
/*

 * arch/arm/plat-omap/include/plat/gpmc-smsc911x.h

 *

 * Copyright (C) 2009 Li-Pro.Net

 * Stephan Linz <linz@li-pro.net>

 *

 * Modified from arch/arm/plat-omap/include/plat/gpmc-smc91x.h

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 as

 * published by the Free Software Foundation.

 */



#ifndef __ASM_ARCH_OMAP_GPMC_SMSC911X_H__



struct omap_smsc911x_platform_data {

	int	id;

	int	cs;

	int	gpio_irq;

	int	gpio_reset;

	u32	flags;

};



#if IS_ENABLED(CONFIG_SMSC911X)



extern void gpmc_smsc911x_init(struct omap_smsc911x_platform_data *d);



#else



static inline void gpmc_smsc911x_init(struct omap_smsc911x_platform_data *d)

{

}



#endif

#endif

CRA Git | Maintained and supported by SUSTech CRA and CCSE