media: dt-bindings: tegra: Update VI and CSI bindings with port info (b73be499) · Commits · 戴 / test

Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt

+90 −2

Original line number	Diff line number	Diff line
		@@ -51,7 +51,15 @@ of the following host1x client modules:
		- vi
		- Tegra210:
		- power-domains: Must include venc powergate node as vi is in VE partition.
		- Tegra210 has CSI part of VI sharing same host interface and register space.

		ports (optional node)
		vi can have optional ports node and max 6 ports are supported. Each port
		should have single 'endpoint' child node. All port nodes are grouped under
		ports node. Please refer to the bindings defined in
		Documentation/devicetree/bindings/media/video-interfaces.txt

		csi (required node)
		Tegra210 has CSI part of VI sharing same host interface and register space.
		So, VI device node should have CSI child node.

		- csi: mipi csi interface to vi
		@@ -65,6 +73,46 @@ of the following host1x client modules:
		- power-domains: Must include sor powergate node as csicil is in
		SOR partition.

		channel (optional nodes)
		Maximum 6 channels are supported with each csi brick as either x4 or x2
		based on hw connectivity to sensor.

		Required properties:
		- reg: csi port number. Valid port numbers are 0 through 5.
		- nvidia,mipi-calibrate: Should contain a phandle and a specifier
		specifying which pads are used by this CSI port and need to be
		calibrated. See also ../display/tegra/nvidia,tegra114-mipi.txt.

		Each channel node must contain 2 port nodes which can be grouped
		under 'ports' node and each port should have a single child 'endpoint'
		node.

		ports node
		Please refer to the bindings defined in
		Documentation/devicetree/bindings/media/video-interfaces.txt

		ports node must contain below 2 port nodes.
		port@0 with single child 'endpoint' node always a sink.
		port@1 with single child 'endpoint' node always a source.

		port@0 (required node)
		Required properties:
		- reg: 0

		endpoint (required node)
		Required properties:
		- data-lanes: an array of data lane from 1 to 4. Valid array
		lengths are 1/2/4.
		- remote-endpoint: phandle to sensor 'endpoint' node.

		port@1 (required node)
		Required properties:
		- reg: 1

		endpoint (required node)
		Required properties:
		- remote-endpoint: phandle to vi port 'endpoint' node.

		- epp: encoder pre-processor

		Required properties:
		@@ -340,6 +388,18 @@ Example:

		ranges = <0x0 0x0 0x54080000 0x2000>;

		ports {
		#address-cells = <1>;
		#size-cells = <0>;

		port@0 {
		reg = <0>;
		imx219_vi_in0: endpoint {
		remote-endpoint = <&imx219_csi_out0>;
		};
		};
		};

		csi@838 {
		compatible = "nvidia,tegra210-csi";
		reg = <0x838 0x1300>;
		@@ -362,6 +422,34 @@ Example:
		<&tegra_car TEGRA210_CLK_CSI_TPG>;
		clock-names = "csi", "cilab", "cilcd", "cile", "csi_tpg";
		power-domains = <&pd_sor>;

		#address-cells = <1>;
		#size-cells = <0>;

		channel@0 {
		reg = <0>;
		nvidia,mipi-calibrate = <&mipi 0x001>;

		ports {
		#address-cells = <1>;
		#size-cells = <0>;

		port@0 {
		reg = <0>;
		imx219_csi_in0: endpoint {
		data-lanes = <1 2>;
		remote-endpoint = <&imx219_out0>;
		};
		};

		port@1 {
		reg = <1>;
		imx219_csi_out0: endpoint {
		remote-endpoint = <&imx219_vi_in0>;
		};
		};
		};
		};
		};
		};

Admin message