Commit b7396a38 authored by Chunyan Zhang's avatar Chunyan Zhang Committed by Greg Kroah-Hartman
Browse files

tty/serial: Add Spreadtrum sc9836-uart driver support 



Add a full sc9836-uart driver for SC9836 SoC which is based on the
spreadtrum sharkl64 platform.
This driver also support earlycon.

Originally-by: default avatarLanqing Liu <lanqing.liu@spreadtrum.com>
Signed-off-by: default avatarOrson Zhai <orson.zhai@spreadtrum.com>
Signed-off-by: default avatarChunyan Zhang <chunyan.zhang@spreadtrum.com>
Acked-by: default avatarArnd Bergmann <arnd@arndb.de>
Reviewed-by: default avatarPeter Hurley <peter@hurleysoftware.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent e570f6bc

drivers/tty/serial/Kconfig

+18 −0
Original line number Diff line number Diff line
@@ -1583,6 +1583,24 @@ config SERIAL_MEN_Z135 
	  This driver can also be build as a module. If so, the module will be called

	  men_z135_uart.ko



config SERIAL_SPRD

	tristate "Support for Spreadtrum serial"

	depends on ARCH_SPRD

	select SERIAL_CORE

	help

	  This enables the driver for the Spreadtrum's serial.



config SERIAL_SPRD_CONSOLE

	bool "Spreadtrum UART console support"

	depends on SERIAL_SPRD=y

	select SERIAL_CORE_CONSOLE

	select SERIAL_EARLYCON

	help

	  Support for early debug console using Spreadtrum's serial. This enables

	  the console before standard serial driver is probed. This is enabled

	  with "earlycon" on the kernel command line. The console is

	  enabled when early_param is processed.



endmenu



config SERIAL_MCTRL_GPIO

drivers/tty/serial/Makefile

+1 −0
Original line number Diff line number Diff line
@@ -93,6 +93,7 @@ obj-$(CONFIG_SERIAL_RP2) += rp2.o 
obj-$(CONFIG_SERIAL_FSL_LPUART)	+= fsl_lpuart.o

obj-$(CONFIG_SERIAL_CONEXANT_DIGICOLOR)	+= digicolor-usart.o

obj-$(CONFIG_SERIAL_MEN_Z135)	+= men_z135_uart.o

obj-$(CONFIG_SERIAL_SPRD) += sprd_serial.o



# GPIOLIB helpers for modem control lines

obj-$(CONFIG_SERIAL_MCTRL_GPIO)	+= serial_mctrl_gpio.o

drivers/tty/serial/sprd_serial.c

0 → 100644
+793 −0
Original line number Diff line number Diff line 
/*

 * Copyright (C) 2012-2015 Spreadtrum Communications Inc.

 *

 * This software is licensed under the terms of the GNU General Public

 * License version 2, as published by the Free Software Foundation, and

 * may be copied, distributed, and modified under those terms.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 */



#if defined(CONFIG_SERIAL_SPRD_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)

#define SUPPORT_SYSRQ

#endif



#include <linux/clk.h>

#include <linux/console.h>

#include <linux/delay.h>

#include <linux/io.h>

#include <linux/ioport.h>

#include <linux/kernel.h>

#include <linux/module.h>

#include <linux/of.h>

#include <linux/platform_device.h>

#include <linux/serial_core.h>

#include <linux/serial.h>

#include <linux/slab.h>

#include <linux/tty.h>

#include <linux/tty_flip.h>



/* device name */

#define UART_NR_MAX		8

#define SPRD_TTY_NAME		"ttyS"

#define SPRD_FIFO_SIZE		128

#define SPRD_DEF_RATE		26000000

#define SPRD_BAUD_IO_LIMIT	3000000

#define SPRD_TIMEOUT		256



/* the offset of serial registers and BITs for them */

/* data registers */

#define SPRD_TXD		0x0000

#define SPRD_RXD		0x0004



/* line status register and its BITs  */

#define SPRD_LSR		0x0008

#define SPRD_LSR_OE		BIT(4)

#define SPRD_LSR_FE		BIT(3)

#define SPRD_LSR_PE		BIT(2)

#define SPRD_LSR_BI		BIT(7)

#define SPRD_LSR_TX_OVER	BIT(15)



/* data number in TX and RX fifo */

#define SPRD_STS1		0x000C



/* interrupt enable register and its BITs */

#define SPRD_IEN		0x0010

#define SPRD_IEN_RX_FULL	BIT(0)

#define SPRD_IEN_TX_EMPTY	BIT(1)

#define SPRD_IEN_BREAK_DETECT	BIT(7)

#define SPRD_IEN_TIMEOUT	BIT(13)



/* interrupt clear register */

#define SPRD_ICLR		0x0014



/* line control register */

#define SPRD_LCR		0x0018

#define SPRD_LCR_STOP_1BIT	0x10

#define SPRD_LCR_STOP_2BIT	0x30

#define SPRD_LCR_DATA_LEN	(BIT(2) | BIT(3))

#define SPRD_LCR_DATA_LEN5	0x0

#define SPRD_LCR_DATA_LEN6	0x4

#define SPRD_LCR_DATA_LEN7	0x8

#define SPRD_LCR_DATA_LEN8	0xc

#define SPRD_LCR_PARITY	(BIT(0) | BIT(1))

#define SPRD_LCR_PARITY_EN	0x2

#define SPRD_LCR_EVEN_PAR	0x0

#define SPRD_LCR_ODD_PAR	0x1



/* control register 1 */

#define SPRD_CTL1			0x001C

#define RX_HW_FLOW_CTL_THLD	BIT(6)

#define RX_HW_FLOW_CTL_EN	BIT(7)

#define TX_HW_FLOW_CTL_EN	BIT(8)

#define RX_TOUT_THLD_DEF	0x3E00

#define RX_HFC_THLD_DEF	0x40



/* fifo threshold register */

#define SPRD_CTL2		0x0020

#define THLD_TX_EMPTY	0x40

#define THLD_RX_FULL	0x40



/* config baud rate register */

#define SPRD_CLKD0		0x0024

#define SPRD_CLKD1		0x0028



/* interrupt mask status register */

#define SPRD_IMSR			0x002C

#define SPRD_IMSR_RX_FIFO_FULL		BIT(0)

#define SPRD_IMSR_TX_FIFO_EMPTY	BIT(1)

#define SPRD_IMSR_BREAK_DETECT		BIT(7)

#define SPRD_IMSR_TIMEOUT		BIT(13)



struct reg_backup {

	u32 ien;

	u32 ctrl0;

	u32 ctrl1;

	u32 ctrl2;

	u32 clkd0;

	u32 clkd1;

	u32 dspwait;

};



struct sprd_uart_port {

	struct uart_port port;

	struct reg_backup reg_bak;

	char name[16];

};



static struct sprd_uart_port *sprd_port[UART_NR_MAX];

static int sprd_ports_num;



static inline unsigned int serial_in(struct uart_port *port, int offset)

{

	return readl_relaxed(port->membase + offset);

}



static inline void serial_out(struct uart_port *port, int offset, int value)

{

	writel_relaxed(value, port->membase + offset);

}



static unsigned int sprd_tx_empty(struct uart_port *port)

{

	if (serial_in(port, SPRD_STS1) & 0xff00)

		return 0;

	else

		return TIOCSER_TEMT;

}



static unsigned int sprd_get_mctrl(struct uart_port *port)

{

	return TIOCM_DSR | TIOCM_CTS;

}



static void sprd_set_mctrl(struct uart_port *port, unsigned int mctrl)

{

	/* nothing to do */

}



static void sprd_stop_tx(struct uart_port *port)

{

	unsigned int ien, iclr;



	iclr = serial_in(port, SPRD_ICLR);

	ien = serial_in(port, SPRD_IEN);



	iclr |= SPRD_IEN_TX_EMPTY;

	ien &= ~SPRD_IEN_TX_EMPTY;



	serial_out(port, SPRD_ICLR, iclr);

	serial_out(port, SPRD_IEN, ien);

}



static void sprd_start_tx(struct uart_port *port)

{

	unsigned int ien;



	ien = serial_in(port, SPRD_IEN);

	if (!(ien & SPRD_IEN_TX_EMPTY)) {

		ien |= SPRD_IEN_TX_EMPTY;

		serial_out(port, SPRD_IEN, ien);

	}

}



static void sprd_stop_rx(struct uart_port *port)

{

	unsigned int ien, iclr;



	iclr = serial_in(port, SPRD_ICLR);

	ien = serial_in(port, SPRD_IEN);



	ien &= ~(SPRD_IEN_RX_FULL | SPRD_IEN_BREAK_DETECT);

	iclr |= SPRD_IEN_RX_FULL | SPRD_IEN_BREAK_DETECT;



	serial_out(port, SPRD_IEN, ien);

	serial_out(port, SPRD_ICLR, iclr);

}



/* The Sprd serial does not support this function. */

static void sprd_break_ctl(struct uart_port *port, int break_state)

{

	/* nothing to do */

}



static int handle_lsr_errors(struct uart_port *port,

			     unsigned int *flag,

			     unsigned int *lsr)

{

	int ret = 0;



	/* statistics */

	if (*lsr & SPRD_LSR_BI) {

		*lsr &= ~(SPRD_LSR_FE | SPRD_LSR_PE);

		port->icount.brk++;

		ret = uart_handle_break(port);

		if (ret)

			return ret;

	} else if (*lsr & SPRD_LSR_PE)

		port->icount.parity++;

	else if (*lsr & SPRD_LSR_FE)

		port->icount.frame++;

	if (*lsr & SPRD_LSR_OE)

		port->icount.overrun++;



	/* mask off conditions which should be ignored */

	*lsr &= port->read_status_mask;

	if (*lsr & SPRD_LSR_BI)

		*flag = TTY_BREAK;

	else if (*lsr & SPRD_LSR_PE)

		*flag = TTY_PARITY;

	else if (*lsr & SPRD_LSR_FE)

		*flag = TTY_FRAME;



	return ret;

}



static inline void sprd_rx(struct uart_port *port)

{

	struct tty_port *tty = &port->state->port;

	unsigned int ch, flag, lsr, max_count = SPRD_TIMEOUT;



	while ((serial_in(port, SPRD_STS1) & 0x00ff) && max_count--) {

		lsr = serial_in(port, SPRD_LSR);

		ch = serial_in(port, SPRD_RXD);

		flag = TTY_NORMAL;

		port->icount.rx++;



		if (lsr & (SPRD_LSR_BI | SPRD_LSR_PE |

			SPRD_LSR_FE | SPRD_LSR_OE))

			if (handle_lsr_errors(port, &lsr, &flag))

				continue;

		if (uart_handle_sysrq_char(port, ch))

			continue;



		uart_insert_char(port, lsr, SPRD_LSR_OE, ch, flag);

	}



	tty_flip_buffer_push(tty);

}



static inline void sprd_tx(struct uart_port *port)

{

	struct circ_buf *xmit = &port->state->xmit;

	int count;



	if (port->x_char) {

		serial_out(port, SPRD_TXD, port->x_char);

		port->icount.tx++;

		port->x_char = 0;

		return;

	}



	if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {

		sprd_stop_tx(port);

		return;

	}



	count = THLD_TX_EMPTY;

	do {

		serial_out(port, SPRD_TXD, xmit->buf[xmit->tail]);

		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);

		port->icount.tx++;

		if (uart_circ_empty(xmit))

			break;

	} while (--count > 0);



	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)

		uart_write_wakeup(port);



	if (uart_circ_empty(xmit))

		sprd_stop_tx(port);

}



/* this handles the interrupt from one port */

static irqreturn_t sprd_handle_irq(int irq, void *dev_id)

{

	struct uart_port *port = dev_id;

	unsigned int ims;



	spin_lock(&port->lock);



	ims = serial_in(port, SPRD_IMSR);



	if (!ims)

		return IRQ_NONE;



	serial_out(port, SPRD_ICLR, ~0);



	if (ims & (SPRD_IMSR_RX_FIFO_FULL |

		SPRD_IMSR_BREAK_DETECT | SPRD_IMSR_TIMEOUT))

		sprd_rx(port);



	if (ims & SPRD_IMSR_TX_FIFO_EMPTY)

		sprd_tx(port);



	spin_unlock(&port->lock);



	return IRQ_HANDLED;

}



static int sprd_startup(struct uart_port *port)

{

	int ret = 0;

	unsigned int ien, fc;

	unsigned int timeout;

	struct sprd_uart_port *sp;

	unsigned long flags;



	serial_out(port, SPRD_CTL2, ((THLD_TX_EMPTY << 8) | THLD_RX_FULL));



	/* clear rx fifo */

	timeout = SPRD_TIMEOUT;

	while (timeout-- && serial_in(port, SPRD_STS1) & 0x00ff)

		serial_in(port, SPRD_RXD);



	/* clear tx fifo */

	timeout = SPRD_TIMEOUT;

	while (timeout-- && serial_in(port, SPRD_STS1) & 0xff00)

		cpu_relax();



	/* clear interrupt */

	serial_out(port, SPRD_IEN, 0);

	serial_out(port, SPRD_ICLR, ~0);



	/* allocate irq */

	sp = container_of(port, struct sprd_uart_port, port);

	snprintf(sp->name, sizeof(sp->name), "sprd_serial%d", port->line);

	ret = devm_request_irq(port->dev, port->irq, sprd_handle_irq,

				IRQF_SHARED, sp->name, port);

	if (ret) {

		dev_err(port->dev, "fail to request serial irq %d, ret=%d\n",

			port->irq, ret);

		return ret;

	}

	fc = serial_in(port, SPRD_CTL1);

	fc |= RX_TOUT_THLD_DEF | RX_HFC_THLD_DEF;

	serial_out(port, SPRD_CTL1, fc);



	/* enable interrupt */

	spin_lock_irqsave(&port->lock, flags);

	ien = serial_in(port, SPRD_IEN);

	ien |= SPRD_IEN_RX_FULL | SPRD_IEN_BREAK_DETECT | SPRD_IEN_TIMEOUT;

	serial_out(port, SPRD_IEN, ien);

	spin_unlock_irqrestore(&port->lock, flags);



	return 0;

}



static void sprd_shutdown(struct uart_port *port)

{

	serial_out(port, SPRD_IEN, 0);

	serial_out(port, SPRD_ICLR, ~0);

	devm_free_irq(port->dev, port->irq, port);

}



static void sprd_set_termios(struct uart_port *port,

				    struct ktermios *termios,

				    struct ktermios *old)

{

	unsigned int baud, quot;

	unsigned int lcr = 0, fc;

	unsigned long flags;



	/* ask the core to calculate the divisor for us */

	baud = uart_get_baud_rate(port, termios, old, 0, SPRD_BAUD_IO_LIMIT);



	quot = (unsigned int)((port->uartclk + baud / 2) / baud);



	/* set data length */

	switch (termios->c_cflag & CSIZE) {

	case CS5:

		lcr |= SPRD_LCR_DATA_LEN5;

		break;

	case CS6:

		lcr |= SPRD_LCR_DATA_LEN6;

		break;

	case CS7:

		lcr |= SPRD_LCR_DATA_LEN7;

		break;

	case CS8:

	default:

		lcr |= SPRD_LCR_DATA_LEN8;

		break;

	}



	/* calculate stop bits */

	lcr &= ~(SPRD_LCR_STOP_1BIT | SPRD_LCR_STOP_2BIT);

	if (termios->c_cflag & CSTOPB)

		lcr |= SPRD_LCR_STOP_2BIT;

	else

		lcr |= SPRD_LCR_STOP_1BIT;



	/* calculate parity */

	lcr &= ~SPRD_LCR_PARITY;

	termios->c_cflag &= ~CMSPAR;	/* no support mark/space */

	if (termios->c_cflag & PARENB) {

		lcr |= SPRD_LCR_PARITY_EN;

		if (termios->c_cflag & PARODD)

			lcr |= SPRD_LCR_ODD_PAR;

		else

			lcr |= SPRD_LCR_EVEN_PAR;

	}



	spin_lock_irqsave(&port->lock, flags);



	/* update the per-port timeout */

	uart_update_timeout(port, termios->c_cflag, baud);



	port->read_status_mask = SPRD_LSR_OE;

	if (termios->c_iflag & INPCK)

		port->read_status_mask |= SPRD_LSR_FE | SPRD_LSR_PE;

	if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK))

		port->read_status_mask |= SPRD_LSR_BI;



	/* characters to ignore */

	port->ignore_status_mask = 0;

	if (termios->c_iflag & IGNPAR)

		port->ignore_status_mask |= SPRD_LSR_PE | SPRD_LSR_FE;

	if (termios->c_iflag & IGNBRK) {

		port->ignore_status_mask |= SPRD_LSR_BI;

		/*

		 * If we're ignoring parity and break indicators,

		 * ignore overruns too (for real raw support).

		 */

		if (termios->c_iflag & IGNPAR)

			port->ignore_status_mask |= SPRD_LSR_OE;

	}



	/* flow control */

	fc = serial_in(port, SPRD_CTL1);

	fc &= ~(RX_HW_FLOW_CTL_THLD | RX_HW_FLOW_CTL_EN | TX_HW_FLOW_CTL_EN);

	if (termios->c_cflag & CRTSCTS) {

		fc |= RX_HW_FLOW_CTL_THLD;

		fc |= RX_HW_FLOW_CTL_EN;

		fc |= TX_HW_FLOW_CTL_EN;

	}



	/* clock divider bit0~bit15 */

	serial_out(port, SPRD_CLKD0, quot & 0xffff);



	/* clock divider bit16~bit20 */

	serial_out(port, SPRD_CLKD1, (quot & 0x1f0000) >> 16);

	serial_out(port, SPRD_LCR, lcr);

	fc |= RX_TOUT_THLD_DEF | RX_HFC_THLD_DEF;

	serial_out(port, SPRD_CTL1, fc);



	spin_unlock_irqrestore(&port->lock, flags);



	/* Don't rewrite B0 */

	if (tty_termios_baud_rate(termios))

		tty_termios_encode_baud_rate(termios, baud, baud);

}



static const char *sprd_type(struct uart_port *port)

{

	return "SPX";

}



static void sprd_release_port(struct uart_port *port)

{

	/* nothing to do */

}



static int sprd_request_port(struct uart_port *port)

{

	return 0;

}



static void sprd_config_port(struct uart_port *port, int flags)

{

	if (flags & UART_CONFIG_TYPE)

		port->type = PORT_SPRD;

}



static int sprd_verify_port(struct uart_port *port,

				   struct serial_struct *ser)

{

	if (ser->type != PORT_SPRD)

		return -EINVAL;

	if (port->irq != ser->irq)

		return -EINVAL;

	return 0;

}



static struct uart_ops serial_sprd_ops = {

	.tx_empty = sprd_tx_empty,

	.get_mctrl = sprd_get_mctrl,

	.set_mctrl = sprd_set_mctrl,

	.stop_tx = sprd_stop_tx,

	.start_tx = sprd_start_tx,

	.stop_rx = sprd_stop_rx,

	.break_ctl = sprd_break_ctl,

	.startup = sprd_startup,

	.shutdown = sprd_shutdown,

	.set_termios = sprd_set_termios,

	.type = sprd_type,

	.release_port = sprd_release_port,

	.request_port = sprd_request_port,

	.config_port = sprd_config_port,

	.verify_port = sprd_verify_port,

};



#ifdef CONFIG_SERIAL_SPRD_CONSOLE

static inline void wait_for_xmitr(struct uart_port *port)

{

	unsigned int status, tmout = 10000;



	/* wait up to 10ms for the character(s) to be sent */

	do {

		status = serial_in(port, SPRD_STS1);

		if (--tmout == 0)

			break;

		udelay(1);

	} while (status & 0xff00);

}



static void sprd_console_putchar(struct uart_port *port, int ch)

{

	wait_for_xmitr(port);

	serial_out(port, SPRD_TXD, ch);

}



static void sprd_console_write(struct console *co, const char *s,

				      unsigned int count)

{

	struct uart_port *port = &sprd_port[co->index]->port;

	int locked = 1;

	unsigned long flags;



	if (port->sysrq)

		locked = 0;

	else if (oops_in_progress)

		locked = spin_trylock_irqsave(&port->lock, flags);

	else

		spin_lock_irqsave(&port->lock, flags);



	uart_console_write(port, s, count, sprd_console_putchar);



	/* wait for transmitter to become empty */

	wait_for_xmitr(port);



	if (locked)

		spin_unlock_irqrestore(&port->lock, flags);

}



static int __init sprd_console_setup(struct console *co, char *options)

{

	struct uart_port *port;

	int baud = 115200;

	int bits = 8;

	int parity = 'n';

	int flow = 'n';



	if (co->index >= UART_NR_MAX || co->index < 0)

		co->index = 0;



	port = &sprd_port[co->index]->port;

	if (port == NULL) {

		pr_info("serial port %d not yet initialized\n", co->index);

		return -ENODEV;

	}

	if (options)

		uart_parse_options(options, &baud, &parity, &bits, &flow);



	return uart_set_options(port, co, baud, parity, bits, flow);

}



static struct uart_driver sprd_uart_driver;

static struct console sprd_console = {

	.name = SPRD_TTY_NAME,

	.write = sprd_console_write,

	.device = uart_console_device,

	.setup = sprd_console_setup,

	.flags = CON_PRINTBUFFER,

	.index = -1,

	.data = &sprd_uart_driver,

};



#define SPRD_CONSOLE	(&sprd_console)



/* Support for earlycon */

static void sprd_putc(struct uart_port *port, int c)

{

	unsigned int timeout = SPRD_TIMEOUT;



	while (timeout-- &&

		   !(readl(port->membase + SPRD_LSR) & SPRD_LSR_TX_OVER))

		cpu_relax();



	writeb(c, port->membase + SPRD_TXD);

}



static void sprd_early_write(struct console *con, const char *s,

				    unsigned n)

{

	struct earlycon_device *dev = con->data;



	uart_console_write(&dev->port, s, n, sprd_putc);

}



static int __init sprd_early_console_setup(

				struct earlycon_device *device,

				const char *opt)

{

	if (!device->port.membase)

		return -ENODEV;



	device->con->write = sprd_early_write;

	return 0;

}



EARLYCON_DECLARE(sprd_serial, sprd_early_console_setup);

OF_EARLYCON_DECLARE(sprd_serial, "sprd,sc9836-uart",

		    sprd_early_console_setup);



#else /* !CONFIG_SERIAL_SPRD_CONSOLE */

#define SPRD_CONSOLE		NULL

#endif



static struct uart_driver sprd_uart_driver = {

	.owner = THIS_MODULE,

	.driver_name = "sprd_serial",

	.dev_name = SPRD_TTY_NAME,

	.major = 0,

	.minor = 0,

	.nr = UART_NR_MAX,

	.cons = SPRD_CONSOLE,

};



static int sprd_probe_dt_alias(int index, struct device *dev)

{

	struct device_node *np;

	int ret = index;



	if (!IS_ENABLED(CONFIG_OF))

		return ret;



	np = dev->of_node;

	if (!np)

		return ret;



	ret = of_alias_get_id(np, "serial");

	if (IS_ERR_VALUE(ret))

		ret = index;

	else if (ret >= ARRAY_SIZE(sprd_port) || sprd_port[ret] != NULL) {

		dev_warn(dev, "requested serial port %d not available.\n", ret);

		ret = index;

	}



	return ret;

}



static int sprd_remove(struct platform_device *dev)

{

	struct sprd_uart_port *sup = platform_get_drvdata(dev);



	if (sup) {

		uart_remove_one_port(&sprd_uart_driver, &sup->port);

		sprd_port[sup->port.line] = NULL;

		sprd_ports_num--;

	}



	if (!sprd_ports_num)

		uart_unregister_driver(&sprd_uart_driver);



	return 0;

}



static int sprd_probe(struct platform_device *pdev)

{

	struct resource *res;

	struct uart_port *up;

	struct clk *clk;

	int irq;

	int index;

	int ret;



	for (index = 0; index < ARRAY_SIZE(sprd_port); index++)

		if (sprd_port[index] == NULL)

			break;



	if (index == ARRAY_SIZE(sprd_port))

		return -EBUSY;



	index = sprd_probe_dt_alias(index, &pdev->dev);



	sprd_port[index] = devm_kzalloc(&pdev->dev,

		sizeof(*sprd_port[index]), GFP_KERNEL);

	if (!sprd_port[index])

		return -ENOMEM;



	up = &sprd_port[index]->port;

	up->dev = &pdev->dev;

	up->line = index;

	up->type = PORT_SPRD;

	up->iotype = SERIAL_IO_PORT;

	up->uartclk = SPRD_DEF_RATE;

	up->fifosize = SPRD_FIFO_SIZE;

	up->ops = &serial_sprd_ops;

	up->flags = UPF_BOOT_AUTOCONF;



	clk = devm_clk_get(&pdev->dev, NULL);

	if (!IS_ERR(clk))

		up->uartclk = clk_get_rate(clk);



	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);

	if (!res) {

		dev_err(&pdev->dev, "not provide mem resource\n");

		return -ENODEV;

	}

	up->mapbase = res->start;

	up->membase = devm_ioremap_resource(&pdev->dev, res);

	if (IS_ERR(up->membase))

		return PTR_ERR(up->membase);



	irq = platform_get_irq(pdev, 0);

	if (irq < 0) {

		dev_err(&pdev->dev, "not provide irq resource\n");

		return -ENODEV;

	}

	up->irq = irq;



	if (!sprd_ports_num) {

		ret = uart_register_driver(&sprd_uart_driver);

		if (ret < 0) {

			pr_err("Failed to register SPRD-UART driver\n");

			return ret;

		}

	}

	sprd_ports_num++;



	ret = uart_add_one_port(&sprd_uart_driver, up);

	if (ret) {

		sprd_port[index] = NULL;

		sprd_remove(pdev);

	}



	platform_set_drvdata(pdev, up);



	return ret;

}



static int sprd_suspend(struct device *dev)

{

	struct sprd_uart_port *sup = dev_get_drvdata(dev);



	uart_suspend_port(&sprd_uart_driver, &sup->port);



	return 0;

}



static int sprd_resume(struct device *dev)

{

	struct sprd_uart_port *sup = dev_get_drvdata(dev);



	uart_resume_port(&sprd_uart_driver, &sup->port);



	return 0;

}



static SIMPLE_DEV_PM_OPS(sprd_pm_ops, sprd_suspend, sprd_resume);



static const struct of_device_id serial_ids[] = {

	{.compatible = "sprd,sc9836-uart",},

	{}

};



static struct platform_driver sprd_platform_driver = {

	.probe		= sprd_probe,

	.remove		= sprd_remove,

	.driver		= {

		.name	= "sprd_serial",

		.of_match_table = of_match_ptr(serial_ids),

		.pm	= &sprd_pm_ops,

	},

};



module_platform_driver(sprd_platform_driver);



MODULE_LICENSE("GPL v2");

MODULE_DESCRIPTION("Spreadtrum SoC serial driver series");

include/uapi/linux/serial_core.h

+3 −0
Original line number Diff line number Diff line
@@ -252,4 +252,7 @@ 
/* Conexant Digicolor */

#define PORT_DIGICOLOR	110



/* SPRD SERIAL  */

#define PORT_SPRD	111



#endif /* _UAPILINUX_SERIAL_CORE_H */

CRA Git | Maintained and supported by SUSTech CRA and CCSE