Commit b6397435 authored by Phil Edworthy's avatar Phil Edworthy Committed by Paul Mundt
Browse files

sh: Add RSK2+SH7269 board 



The RSK2+SH7269 board uses the SH7269 processor. It is often
referred to as just rsk7269. NOR Flash, SDRAM, serial, USB Host and
ethernet are working.

Signed-off-by: default avatarPhil Edworthy <phil.edworthy@renesas.com>
Signed-off-by: default avatarPaul Mundt <lethal@linux-sh.org>
parent 0b25b7c8

arch/sh/boards/Kconfig

+2 −1
Original line number Diff line number Diff line
@@ -133,7 +133,8 @@ config SH_RTS7751R2D 


config SH_RSK

	bool "Renesas Starter Kit"

	depends on CPU_SUBTYPE_SH7201 || CPU_SUBTYPE_SH7203 || CPU_SUBTYPE_SH7264

	depends on CPU_SUBTYPE_SH7201 || CPU_SUBTYPE_SH7203 || \

	  CPU_SUBTYPE_SH7264 || CPU_SUBTYPE_SH7269

	help

	 Select this option if configuring for any of the RSK+ MCU

	 evaluation platforms.

arch/sh/boards/mach-rsk/Kconfig

+5 −0
Original line number Diff line number Diff line
@@ -18,6 +18,11 @@ config SH_RSK7264 
	select ARCH_REQUIRE_GPIOLIB

	depends on CPU_SUBTYPE_SH7264



config SH_RSK7269

	bool "RSK2+SH7269"

	select ARCH_REQUIRE_GPIOLIB

	depends on CPU_SUBTYPE_SH7269



endchoice



endif

arch/sh/boards/mach-rsk/Makefile

+1 −0
Original line number Diff line number Diff line 
obj-y				:= setup.o

obj-$(CONFIG_SH_RSK7203)	+= devices-rsk7203.o

obj-$(CONFIG_SH_RSK7264)	+= devices-rsk7264.o

obj-$(CONFIG_SH_RSK7269)	+= devices-rsk7269.o

arch/sh/boards/mach-rsk/devices-rsk7269.c

0 → 100644
+60 −0
Original line number Diff line number Diff line 
/*

 * RSK+SH7269 Support

 *

 * Copyright (C) 2012  Renesas Electronics Europe Ltd

 * Copyright (C) 2012  Phil Edworthy

 *

 * This file is subject to the terms and conditions of the GNU General Public

 * License.  See the file "COPYING" in the main directory of this archive

 * for more details.

 */

#include <linux/init.h>

#include <linux/types.h>

#include <linux/platform_device.h>

#include <linux/interrupt.h>

#include <linux/input.h>

#include <linux/smsc911x.h>

#include <linux/gpio.h>

#include <asm/machvec.h>

#include <asm/io.h>



static struct smsc911x_platform_config smsc911x_config = {

	.phy_interface	= PHY_INTERFACE_MODE_MII,

	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,

	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,

	.flags		= SMSC911X_USE_16BIT | SMSC911X_SWAP_FIFO,

};



static struct resource smsc911x_resources[] = {

	[0] = {

		.start		= 0x24000000,

		.end		= 0x240000ff,

		.flags		= IORESOURCE_MEM,

	},

	[1] = {

		.start		= 85,

		.end		= 85,

		.flags		= IORESOURCE_IRQ,

	},

};



static struct platform_device smsc911x_device = {

	.name		= "smsc911x",

	.id		= -1,

	.num_resources	= ARRAY_SIZE(smsc911x_resources),

	.resource	= smsc911x_resources,

	.dev		= {

		.platform_data = &smsc911x_config,

	},

};



static struct platform_device *rsk7269_devices[] __initdata = {

	&smsc911x_device,

};



static int __init rsk7269_devices_setup(void)

{

	return platform_add_devices(rsk7269_devices,

				    ARRAY_SIZE(rsk7269_devices));

}

device_initcall(rsk7269_devices_setup);

arch/sh/configs/rsk7269_defconfig

0 → 100644
+65 −0
Original line number Diff line number Diff line 
CONFIG_LOG_BUF_SHIFT=14

CONFIG_CC_OPTIMIZE_FOR_SIZE=y

CONFIG_EMBEDDED=y

# CONFIG_VM_EVENT_COUNTERS is not set

CONFIG_SLAB=y

# CONFIG_LBDAF is not set

# CONFIG_BLK_DEV_BSG is not set

# CONFIG_IOSCHED_DEADLINE is not set

# CONFIG_IOSCHED_CFQ is not set

CONFIG_SWAP_IO_SPACE=y

CONFIG_CPU_SUBTYPE_SH7269=y

CONFIG_MEMORY_START=0x0c000000

CONFIG_MEMORY_SIZE=0x02000000

CONFIG_FLATMEM_MANUAL=y

CONFIG_CPU_BIG_ENDIAN=y

CONFIG_SH_RSK=y

# CONFIG_SH_TIMER_MTU2 is not set

CONFIG_SH_PCLK_FREQ=66700000

CONFIG_BINFMT_FLAT=y

CONFIG_NET=y

CONFIG_INET=y

CONFIG_IP_PNP=y

CONFIG_IP_PNP_DHCP=y

# CONFIG_INET_XFRM_MODE_TRANSPORT is not set

# CONFIG_INET_XFRM_MODE_TUNNEL is not set

# CONFIG_INET_XFRM_MODE_BEET is not set

# CONFIG_INET_LRO is not set

# CONFIG_INET_DIAG is not set

# CONFIG_IPV6 is not set

CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"

# CONFIG_FW_LOADER is not set

CONFIG_SCSI=y

CONFIG_BLK_DEV_SD=y

CONFIG_NETDEVICES=y

CONFIG_SMSC911X=y

CONFIG_SMSC_PHY=y

# CONFIG_INPUT_MOUSEDEV is not set

# CONFIG_INPUT_KEYBOARD is not set

# CONFIG_INPUT_MOUSE is not set

# CONFIG_SERIO is not set

CONFIG_SERIAL_SH_SCI=y

CONFIG_SERIAL_SH_SCI_NR_UARTS=8

CONFIG_SERIAL_SH_SCI_CONSOLE=y

# CONFIG_HWMON is not set

CONFIG_USB=y

CONFIG_USB_DEBUG=y

CONFIG_USB_ANNOUNCE_NEW_DEVICES=y

# CONFIG_USB_DEVICE_CLASS is not set

CONFIG_USB_R8A66597_HCD=y

CONFIG_USB_STORAGE=y

CONFIG_USB_STORAGE_DEBUG=y

CONFIG_USB_LIBUSUAL=y

CONFIG_EXT2_FS=y

CONFIG_EXT3_FS=y

# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set

CONFIG_VFAT_FS=y

CONFIG_NFS_FS=y

CONFIG_NFS_V3=y

CONFIG_ROOT_NFS=y

CONFIG_PARTITION_ADVANCED=y

CONFIG_NLS_CODEPAGE_437=y

CONFIG_NLS_ISO8859_1=y

# CONFIG_ENABLE_MUST_CHECK is not set

CONFIG_SYSCTL_SYSCALL_CHECK=y

# CONFIG_FTRACE is not set

CRA Git | Maintained and supported by SUSTech CRA and CCSE