Commit b48c5ec5 authored by David S. Miller's avatar David S. Miller
Browse files

Merge branch 'defxx-next' 



Maciej W. Rozycki says:

====================
defxx: Assorted fixes, mainly for EISA

 This is another small series fixing issues with the defxx driver,
mainly for EISA boards, but there's one patch for PCI as well.

 In the end, with the inexistent second IDE channel forcefully disabled
in the IDE driver, I wasn't able to retrigger spurious IRQ 15 interrupts
I previously saw and suspected the DEFEA to be the cause.  So it looks
to me these were real noise on IRQ 15 rather than the latency in
interrupt acknowledge in the DEFEA board causing the slave 8259A to
issue the spurious interrupt vector.  In any case not an issue with the
defxx driver, so nothing to do here unless the problem resurfaces.

 I haven't seen your announcement about opening net-next since the
closure on Oct 6th, but from the patch traffic and the policy described
in Documentation/networking/netdev-FAQ.txt I gather your tree is open.
And these are bug fixes anyway, not new features, so please apply.
====================

Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parents 37dd9255 4d0438e5

drivers/net/fddi/defxx.c

+126 −61
Original line number Diff line number Diff line
@@ -414,7 +414,7 @@ static void dfx_port_read_long(DFX_board_t *bp, int offset, u32 *data) 
 * ================

 *

 * Overview:

 *   Retrieves the address range used to access control and status

 *   Retrieves the address ranges used to access control and status

 *   registers.

 *

 * Returns:
@@ -422,8 +422,8 @@ static void dfx_port_read_long(DFX_board_t *bp, int offset, u32 *data) 
 *

 * Arguments:

 *   bdev	- pointer to device information

 *   bar_start	- pointer to store the start address

 *   bar_len	- pointer to store the length of the area

 *   bar_start	- pointer to store the start addresses

 *   bar_len	- pointer to store the lengths of the areas

 *

 * Assumptions:

 *   I am sure there are some.
@@ -442,38 +442,47 @@ static void dfx_get_bars(struct device *bdev, 
	if (dfx_bus_pci) {

		int num = dfx_use_mmio ? 0 : 1;



		*bar_start = pci_resource_start(to_pci_dev(bdev), num);

		*bar_len = pci_resource_len(to_pci_dev(bdev), num);

		bar_start[0] = pci_resource_start(to_pci_dev(bdev), num);

		bar_len[0] = pci_resource_len(to_pci_dev(bdev), num);

		bar_start[2] = bar_start[1] = 0;

		bar_len[2] = bar_len[1] = 0;

	}

	if (dfx_bus_eisa) {

		unsigned long base_addr = to_eisa_device(bdev)->base_addr;

		resource_size_t bar;

		resource_size_t bar_lo;

		resource_size_t bar_hi;



		if (dfx_use_mmio) {

			bar = inb(base_addr + PI_ESIC_K_MEM_ADD_CMP_2);

			bar <<= 8;

			bar |= inb(base_addr + PI_ESIC_K_MEM_ADD_CMP_1);

			bar <<= 8;

			bar |= inb(base_addr + PI_ESIC_K_MEM_ADD_CMP_0);

			bar <<= 16;

			*bar_start = bar;

			bar = inb(base_addr + PI_ESIC_K_MEM_ADD_MASK_2);

			bar <<= 8;

			bar |= inb(base_addr + PI_ESIC_K_MEM_ADD_MASK_1);

			bar <<= 8;

			bar |= inb(base_addr + PI_ESIC_K_MEM_ADD_MASK_0);

			bar <<= 16;

			*bar_len = (bar | PI_MEM_ADD_MASK_M) + 1;

			bar_lo = inb(base_addr + PI_ESIC_K_MEM_ADD_LO_CMP_2);

			bar_lo <<= 8;

			bar_lo |= inb(base_addr + PI_ESIC_K_MEM_ADD_LO_CMP_1);

			bar_lo <<= 8;

			bar_lo |= inb(base_addr + PI_ESIC_K_MEM_ADD_LO_CMP_0);

			bar_lo <<= 8;

			bar_start[0] = bar_lo;

			bar_hi = inb(base_addr + PI_ESIC_K_MEM_ADD_HI_CMP_2);

			bar_hi <<= 8;

			bar_hi |= inb(base_addr + PI_ESIC_K_MEM_ADD_HI_CMP_1);

			bar_hi <<= 8;

			bar_hi |= inb(base_addr + PI_ESIC_K_MEM_ADD_HI_CMP_0);

			bar_hi <<= 8;

			bar_len[0] = ((bar_hi - bar_lo) | PI_MEM_ADD_MASK_M) +

				     1;

		} else {

			*bar_start = base_addr;

			*bar_len = PI_ESIC_K_CSR_IO_LEN +

				   PI_ESIC_K_BURST_HOLDOFF_LEN;

			bar_start[0] = base_addr;

			bar_len[0] = PI_ESIC_K_CSR_IO_LEN;

		}

		bar_start[1] = base_addr + PI_DEFEA_K_BURST_HOLDOFF;

		bar_len[1] = PI_ESIC_K_BURST_HOLDOFF_LEN;

		bar_start[2] = base_addr + PI_ESIC_K_ESIC_CSR;

		bar_len[2] = PI_ESIC_K_ESIC_CSR_LEN;

	}

	if (dfx_bus_tc) {

		*bar_start = to_tc_dev(bdev)->resource.start +

		bar_start[0] = to_tc_dev(bdev)->resource.start +

			       PI_TC_K_CSR_OFFSET;

		*bar_len = PI_TC_K_CSR_LEN;

		bar_len[0] = PI_TC_K_CSR_LEN;

		bar_start[2] = bar_start[1] = 0;

		bar_len[2] = bar_len[1] = 0;

	}

}
@@ -518,13 +527,14 @@ static int dfx_register(struct device *bdev) 
{

	static int version_disp;

	int dfx_bus_pci = dev_is_pci(bdev);

	int dfx_bus_eisa = DFX_BUS_EISA(bdev);

	int dfx_bus_tc = DFX_BUS_TC(bdev);

	int dfx_use_mmio = DFX_MMIO || dfx_bus_tc;

	const char *print_name = dev_name(bdev);

	struct net_device *dev;

	DFX_board_t	  *bp;			/* board pointer */

	resource_size_t bar_start = 0;		/* pointer to port */

	resource_size_t bar_len = 0;		/* resource length */

	resource_size_t bar_start[3];		/* pointers to ports */

	resource_size_t bar_len[3];		/* resource length */

	int alloc_size;				/* total buffer size used */

	struct resource *region;

	int err = 0;
@@ -542,11 +552,14 @@ static int dfx_register(struct device *bdev) 
	}



	/* Enable PCI device. */

	if (dfx_bus_pci && pci_enable_device(to_pci_dev(bdev))) {

		printk(KERN_ERR "%s: Cannot enable PCI device, aborting\n",

	if (dfx_bus_pci) {

		err = pci_enable_device(to_pci_dev(bdev));

		if (err) {

			pr_err("%s: Cannot enable PCI device, aborting\n",

			       print_name);

			goto err_out;

		}

	}



	SET_NETDEV_DEV(dev, bdev);
@@ -554,31 +567,62 @@ static int dfx_register(struct device *bdev) 
	bp->bus_dev = bdev;

	dev_set_drvdata(bdev, dev);



	dfx_get_bars(bdev, &bar_start, &bar_len);

	dfx_get_bars(bdev, bar_start, bar_len);

	if (dfx_bus_eisa && dfx_use_mmio && bar_start[0] == 0) {

		pr_err("%s: Cannot use MMIO, no address set, aborting\n",

		       print_name);

		pr_err("%s: Run ECU and set adapter's MMIO location\n",

		       print_name);

		pr_err("%s: Or recompile driver with \"CONFIG_DEFXX_MMIO=n\""

		       "\n", print_name);

		err = -ENXIO;

		goto err_out;

	}



	if (dfx_use_mmio)

		region = request_mem_region(bar_start, bar_len, print_name);

		region = request_mem_region(bar_start[0], bar_len[0],

					    print_name);

	else

		region = request_region(bar_start, bar_len, print_name);

		region = request_region(bar_start[0], bar_len[0], print_name);

	if (!region) {

		printk(KERN_ERR "%s: Cannot reserve I/O resource "

		       "0x%lx @ 0x%lx, aborting\n",

		       print_name, (long)bar_len, (long)bar_start);

		pr_err("%s: Cannot reserve %s resource 0x%lx @ 0x%lx, "

		       "aborting\n", dfx_use_mmio ? "MMIO" : "I/O", print_name,

		       (long)bar_len[0], (long)bar_start[0]);

		err = -EBUSY;

		goto err_out_disable;

	}

	if (bar_start[1] != 0) {

		region = request_region(bar_start[1], bar_len[1], print_name);

		if (!region) {

			pr_err("%s: Cannot reserve I/O resource "

			       "0x%lx @ 0x%lx, aborting\n", print_name,

			       (long)bar_len[1], (long)bar_start[1]);

			err = -EBUSY;

			goto err_out_csr_region;

		}

	}

	if (bar_start[2] != 0) {

		region = request_region(bar_start[2], bar_len[2], print_name);

		if (!region) {

			pr_err("%s: Cannot reserve I/O resource "

			       "0x%lx @ 0x%lx, aborting\n", print_name,

			       (long)bar_len[2], (long)bar_start[2]);

			err = -EBUSY;

			goto err_out_bh_region;

		}

	}



	/* Set up I/O base address. */

	if (dfx_use_mmio) {

		bp->base.mem = ioremap_nocache(bar_start, bar_len);

		bp->base.mem = ioremap_nocache(bar_start[0], bar_len[0]);

		if (!bp->base.mem) {

			printk(KERN_ERR "%s: Cannot map MMIO\n", print_name);

			err = -ENOMEM;

			goto err_out_region;

			goto err_out_esic_region;

		}

	} else {

		bp->base.port = bar_start;

		dev->base_addr = bar_start;

		bp->base.port = bar_start[0];

		dev->base_addr = bar_start[0];

	}



	/* Initialize new device structure */
@@ -587,7 +631,7 @@ static int dfx_register(struct device *bdev) 
	if (dfx_bus_pci)

		pci_set_master(to_pci_dev(bdev));



	if (dfx_driver_init(dev, print_name, bar_start) != DFX_K_SUCCESS) {

	if (dfx_driver_init(dev, print_name, bar_start[0]) != DFX_K_SUCCESS) {

		err = -ENODEV;

		goto err_out_unmap;

	}
@@ -615,11 +659,19 @@ err_out_unmap: 
	if (dfx_use_mmio)

		iounmap(bp->base.mem);



err_out_region:

err_out_esic_region:

	if (bar_start[2] != 0)

		release_region(bar_start[2], bar_len[2]);



err_out_bh_region:

	if (bar_start[1] != 0)

		release_region(bar_start[1], bar_len[1]);



err_out_csr_region:

	if (dfx_use_mmio)

		release_mem_region(bar_start, bar_len);

		release_mem_region(bar_start[0], bar_len[0]);

	else

		release_region(bar_start, bar_len);

		release_region(bar_start[0], bar_len[0]);



err_out_disable:

	if (dfx_bus_pci)
@@ -711,13 +763,14 @@ static void dfx_bus_init(struct net_device *dev) 
		}



		/*

		 * Enable memory decoding (MEMCS0) and/or port decoding

		 * Enable memory decoding (MEMCS1) and/or port decoding

		 * (IOCS1/IOCS0) as appropriate in Function Control

		 * Register.  IOCS0 is used for PDQ registers, taking 16

		 * 32-bit words, while IOCS1 is used for the Burst Holdoff

		 * register, taking a single 32-bit word only.  We use the

		 * slot-specific I/O range as per the ESIC spec, that is

		 * set bits 15:12 in the mask registers to mask them out.

		 * Register.  MEMCS1 or IOCS0 is used for PDQ registers,

		 * taking 16 32-bit words, while IOCS1 is used for the

		 * Burst Holdoff register, taking a single 32-bit word

		 * only.  We use the slot-specific I/O range as per the

		 * ESIC spec, that is set bits 15:12 in the mask registers

		 * to mask them out.

		 */



		/* Set the decode range of the board.  */
@@ -742,9 +795,11 @@ static void dfx_bus_init(struct net_device *dev) 
		outb(val, base_addr + PI_ESIC_K_IO_ADD_MASK_1_0);



		/* Enable the decoders.  */

		val = PI_FUNCTION_CNTRL_M_IOCS1 | PI_FUNCTION_CNTRL_M_IOCS0;

		val = PI_FUNCTION_CNTRL_M_IOCS1;

		if (dfx_use_mmio)

			val |= PI_FUNCTION_CNTRL_M_MEMCS0;

			val |= PI_FUNCTION_CNTRL_M_MEMCS1;

		else

			val |= PI_FUNCTION_CNTRL_M_IOCS0;

		outb(val, base_addr + PI_ESIC_K_FUNCTION_CNTRL);



		/*
@@ -838,6 +893,12 @@ static void dfx_bus_uninit(struct net_device *dev) 
		val = inb(base_addr + PI_ESIC_K_IO_CONFIG_STAT_0);

		val &= ~PI_CONFIG_STAT_0_M_INT_ENB;

		outb(val, base_addr + PI_ESIC_K_IO_CONFIG_STAT_0);



		/* Disable the board.  */

		outb(0, base_addr + PI_ESIC_K_SLOT_CNTRL);



		/* Disable memory and port decoders.  */

		outb(0, base_addr + PI_ESIC_K_FUNCTION_CNTRL);

	}

	if (dfx_bus_pci) {

		/* Disable interrupts at PCI bus interface chip (PFI) */
@@ -1062,7 +1123,7 @@ static int dfx_driver_init(struct net_device *dev, const char *print_name, 
	if (dfx_bus_pci)

		board_name = "DEFPA";

	pr_info("%s: %s at %s addr = 0x%llx, IRQ = %d, Hardware addr = %pMF\n",

		print_name, board_name, dfx_use_mmio ? "" : "I/O ",

		print_name, board_name, dfx_use_mmio ? "MMIO" : "I/O",

		(long long)bar_start, dev->irq, dev->dev_addr);



	/*
@@ -3636,8 +3697,8 @@ static void dfx_unregister(struct device *bdev) 
	int dfx_bus_pci = dev_is_pci(bdev);

	int dfx_bus_tc = DFX_BUS_TC(bdev);

	int dfx_use_mmio = DFX_MMIO || dfx_bus_tc;

	resource_size_t bar_start = 0;		/* pointer to port */

	resource_size_t bar_len = 0;		/* resource length */

	resource_size_t bar_start[3];		/* pointers to ports */

	resource_size_t bar_len[3];		/* resource lengths */

	int		alloc_size;		/* total buffer size used */



	unregister_netdev(dev);
@@ -3655,12 +3716,16 @@ static void dfx_unregister(struct device *bdev) 


	dfx_bus_uninit(dev);



	dfx_get_bars(bdev, &bar_start, &bar_len);

	dfx_get_bars(bdev, bar_start, bar_len);

	if (bar_start[2] != 0)

		release_region(bar_start[2], bar_len[2]);

	if (bar_start[1] != 0)

		release_region(bar_start[1], bar_len[1]);

	if (dfx_use_mmio) {

		iounmap(bp->base.mem);

		release_mem_region(bar_start, bar_len);

		release_mem_region(bar_start[0], bar_len[0]);

	} else

		release_region(bar_start, bar_len);

		release_region(bar_start[0], bar_len[0]);



	if (dfx_bus_pci)

		pci_disable_device(to_pci_dev(bdev));

drivers/net/fddi/defxx.h

+3 −1
Original line number Diff line number Diff line
@@ -1481,9 +1481,11 @@ typedef union 


#define PI_ESIC_K_CSR_IO_LEN		0x40		/* 64 bytes */

#define PI_ESIC_K_BURST_HOLDOFF_LEN	0x04		/* 4 bytes */

#define PI_ESIC_K_ESIC_CSR_LEN		0x40		/* 64 bytes */



#define PI_DEFEA_K_CSR_IO		0x000

#define PI_DEFEA_K_BURST_HOLDOFF	0x040

#define PI_ESIC_K_ESIC_CSR		0xC80



#define PI_ESIC_K_SLOT_ID            	0xC80

#define PI_ESIC_K_SLOT_CNTRL		0xC84
@@ -1556,7 +1558,7 @@ typedef union 
#define PI_BURST_HOLDOFF_V_RESERVED	1

#define PI_BURST_HOLDOFF_V_MEM_MAP	0



/* Define the implicit mask of the Memory Address Mask Register.  */

/* Define the implicit mask of the Memory Address Compare registers.  */



#define PI_MEM_ADD_MASK_M		0x3ff

CRA Git | Maintained and supported by SUSTech CRA and CCSE