Commit b4887e16 authored by Tony Lindgren's avatar Tony Lindgren
Browse files

Merge tag 'for_3.13_super_late/dts_signed' of... 

Merge tag 'for_3.13_super_late/dts_signed' of git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt into omap-for-v3.13/dt

Add a lot of N900 nodes
Add OPP table to OMAP5/DRA7
Add support for Newflow NanoBone board
parents d7c8f259 b306e7b8

MAINTAINERS

+6 −0
Original line number Diff line number Diff line
@@ -6088,6 +6088,12 @@ L: linux-omap@vger.kernel.org 
S:	Maintained

F:	drivers/gpio/gpio-omap.c



OMAP/NEWFLOW NANOBONE MACHINE SUPPORT

M:	Mark Jackson <mpfj@newflow.co.uk>

L:	linux-omap@vger.kernel.org

S:	Maintained

F:	arch/arm/boot/dts/am335x-nano.dts



OMFS FILESYSTEM

M:	Bob Copeland <me@bobcopeland.com>

L:	linux-karma-devel@lists.sourceforge.net

arch/arm/boot/dts/Makefile

+1 −0
Original line number Diff line number Diff line
@@ -188,6 +188,7 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \ 
	am335x-evmsk.dtb \

	am335x-bone.dtb \

	am335x-boneblack.dtb \

	am335x-nano.dtb \

	am335x-base0033.dtb \

	am3517-evm.dtb \

	am3517_mt_ventoux.dtb \

arch/arm/boot/dts/am335x-nano.dts

0 → 100644
+431 −0
Original line number Diff line number Diff line 
/*

 * Copyright (C) 2013 Newflow Ltd - http://www.newflow.co.uk/

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 as

 * published by the Free Software Foundation.

 */

/dts-v1/;



#include "am33xx.dtsi"



/ {

	model = "Newflow AM335x NanoBone";

	compatible = "ti,am33xx";



	cpus {

		cpu@0 {

			cpu0-supply = <&dcdc2_reg>;

		};

	};



	memory {

		device_type = "memory";

		reg = <0x80000000 0x10000000>; /* 256 MB */

	};



	leds {

		compatible = "gpio-leds";



		led@0 {

			label = "nanobone:green:usr1";

			gpios = <&gpio1 5 0>;

			default-state = "off";

		};

	};

};



&am33xx_pinmux {

	pinctrl-names = "default";

	pinctrl-0 = <&misc_pins>;



	misc_pins: misc_pins {

		pinctrl-single,pins = <

			0x15c (PIN_OUTPUT | MUX_MODE7)	/* spi0_cs0.gpio0_5 */

		>;

	};



	gpmc_pins: gpmc_pins {

		pinctrl-single,pins = <

			0x0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */

			0x4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */

			0x8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */

			0xc (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */

			0x10 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */

			0x14 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */

			0x18 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */

			0x1c (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */

			0x20 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad8.gpmc_ad8 */

			0x24 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad9.gpmc_ad9 */

			0x28 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad10.gpmc_ad10 */

			0x2c (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad11.gpmc_ad11 */

			0x30 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad12.gpmc_ad12 */

			0x34 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad13.gpmc_ad13 */

			0x38 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad14.gpmc_ad14 */

			0x3c (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad15.gpmc_ad15 */



			0x70 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */

			0x7c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0 */

			0x80 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn1.gpmc_csn1 */

			0x84 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn2.gpmc_csn2 */

			0x88 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn3.gpmc_csn3 */



			0x90 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */

			0x94 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */

			0x98 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */

			0x9c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_ben0_cle.gpmc_ben0_cle */



			0xa4 (PIN_OUTPUT | MUX_MODE1)		/* lcd_data1.gpmc_a1 */

			0xa8 (PIN_OUTPUT | MUX_MODE1)		/* lcd_data2.gpmc_a2 */

			0xac (PIN_OUTPUT | MUX_MODE1)		/* lcd_data3.gpmc_a3 */

			0xb0 (PIN_OUTPUT | MUX_MODE1)		/* lcd_data4.gpmc_a4 */

			0xb4 (PIN_OUTPUT | MUX_MODE1)		/* lcd_data5.gpmc_a5 */

			0xb8 (PIN_OUTPUT | MUX_MODE1)		/* lcd_data6.gpmc_a6 */

			0xbc (PIN_OUTPUT | MUX_MODE1)		/* lcd_data7.gpmc_a7 */



			0xe0 (PIN_OUTPUT | MUX_MODE1)		/* lcd_vsync.gpmc_a8 */

			0xe4 (PIN_OUTPUT | MUX_MODE1)		/* lcd_hsync.gpmc_a9 */

			0xe8 (PIN_OUTPUT | MUX_MODE1)		/* lcd_pclk.gpmc_a10 */

		>;

	};



	i2c0_pins: i2c0_pins {

		pinctrl-single,pins = <

			0x188 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* i2c0_sda.i2c0_sda */

			0x18c (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* i2c0_scl.i2c0_scl */

		>;

	};



	uart0_pins: uart0_pins {

		pinctrl-single,pins = <

			0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */

			0x174 (PIN_OUTPUT | MUX_MODE0)		/* uart0_txd.uart0_txd */

		>;

	};



	uart1_pins: uart1_pins {

		pinctrl-single,pins = <

			0x178 (PIN_OUTPUT | MUX_MODE7)		/* uart1_ctsn.uart1_ctsn */

			0x17c (PIN_OUTPUT | MUX_MODE7)		/* uart1_rtsn.uart1_rtsn */

			0x180 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart1_rxd.uart1_rxd */

			0x184 (PIN_OUTPUT | MUX_MODE0)		/* uart1_txd.uart1_txd */

		>;

	};



	uart2_pins: uart2_pins {

		pinctrl-single,pins = <

			0xc0 (PIN_INPUT_PULLUP | MUX_MODE7)	/* lcd_data8.gpio2[14] */

			0xc4 (PIN_OUTPUT | MUX_MODE7)		/* lcd_data9.gpio2[15] */

			0x150 (PIN_INPUT | MUX_MODE1)		/* spi0_sclk.uart2_rxd */

			0x154 (PIN_OUTPUT | MUX_MODE1)		/* spi0_d0.uart2_txd */

		>;

	};



	uart3_pins: uart3_pins {

		pinctrl-single,pins = <

			0xc8 (PIN_INPUT_PULLUP | MUX_MODE6)	/* lcd_data10.uart3_ctsn */

			0xcc (PIN_OUTPUT | MUX_MODE6)		/* lcd_data11.uart3_rtsn */

			0x160 (PIN_INPUT | MUX_MODE1)		/* spi0_cs1.uart3_rxd */

			0x164 (PIN_OUTPUT | MUX_MODE1)		/* ecap0_in_pwm0_out.uart3_txd */

		>;

	};



	uart4_pins: uart4_pins {

		pinctrl-single,pins = <

			0xd0 (PIN_INPUT_PULLUP | MUX_MODE6)	/* lcd_data12.uart4_ctsn */

			0xd4 (PIN_OUTPUT | MUX_MODE6)		/* lcd_data13.uart4_rtsn */

			0x168 (PIN_INPUT | MUX_MODE1)		/* uart0_ctsn.uart4_rxd */

			0x16c (PIN_OUTPUT | MUX_MODE1)		/* uart0_rtsn.uart4_txd */

		>;

	};



	uart5_pins: uart5_pins {

		pinctrl-single,pins = <

			0xd8 (PIN_INPUT | MUX_MODE4)		/* lcd_data14.uart5_rxd */

			0x144 (PIN_OUTPUT | MUX_MODE3)		/* rmiii1_refclk.uart5_txd */

		>;

	};



	mmc1_pins: mmc1_pins {

		pinctrl-single,pins = <

			0xf0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat0.mmc0_dat0 */

			0xf4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat1.mmc0_dat1 */

			0xf8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat2.mmc0_dat2 */

			0xfc (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat3.mmc0_dat3 */

			0x100 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_clk.mmc0_clk */

			0x104 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_cmd.mmc0_cmd */

			0x1e8 (PIN_INPUT_PULLUP | MUX_MODE7)	/* emu1.gpio3[8] */

			0x1a0 (PIN_INPUT_PULLUP | MUX_MODE7)	/* mcasp0_aclkr.gpio3[18] */

		>;

	};

};



&uart0 {

	pinctrl-names = "default";

	pinctrl-0 = <&uart0_pins>;

	status = "okay";

};



&uart1 {

	pinctrl-names = "default";

	pinctrl-0 = <&uart1_pins>;

	status = "okay";

	rts-gpio = <&gpio0 13 GPIO_ACTIVE_HIGH>;

	rs485-rts-active-high;

	rs485-rx-during-tx;

	rs485-rts-delay = <1 1>;

	linux,rs485-enabled-at-boot-time;

};



&uart2 {

	pinctrl-names = "default";

	pinctrl-0 = <&uart2_pins>;

	status = "okay";

	rts-gpio = <&gpio2 15 GPIO_ACTIVE_HIGH>;

	rs485-rts-active-high;

	rs485-rts-delay = <1 1>;

	linux,rs485-enabled-at-boot-time;

};



&uart3 {

	pinctrl-names = "default";

	pinctrl-0 = <&uart3_pins>;

	status = "okay";

};



&uart4 {

	pinctrl-names = "default";

	pinctrl-0 = <&uart4_pins>;

	status = "okay";

};



&uart5 {

	pinctrl-names = "default";

	pinctrl-0 = <&uart5_pins>;

	status = "okay";

};



&i2c0 {

	status = "okay";

	pinctrl-names = "default";

	clock-frequency = <400000>;

	pinctrl-names = "default";

	pinctrl-0 = <&i2c0_pins>;



	gpio@20 {

		compatible = "mcp,mcp23017";

		reg = <0x20>;

	};



	tps: tps@24 {

		reg = <0x24>;

	};



	eeprom@53 {

		compatible = "mcp,24c02";

		reg = <0x53>;

		pagesize = <8>;

	};



	rtc@68 {

		compatible = "dallas,ds1307";

		reg = <0x68>;

	};

};



&elm {

	status = "okay";

};



&gpmc {

	compatible = "ti,am3352-gpmc";

	ti,hwmods = "gpmc";

	status = "okay";

	gpmc,num-waitpins = <2>;

	pinctrl-names = "default";

	pinctrl-0 = <&gpmc_pins>;



	#address-cells = <2>;

	#size-cells = <1>;

	ranges = <0 0 0x08000000 0x08000000>;	/* CS0: NOR 128M */



	nor@0,0 {

		reg = <0 0x00000000 0x08000000>;

		compatible = "cfi-flash";

		linux,mtd-name = "spansion,s29gl010p11t";

		bank-width = <2>;



		gpmc,mux-add-data = <2>;



		gpmc,sync-clk-ps = <0>;

		gpmc,cs-on-ns = <0>;

		gpmc,cs-rd-off-ns = <160>;

		gpmc,cs-wr-off-ns = <160>;

		gpmc,adv-on-ns = <10>;

		gpmc,adv-rd-off-ns = <30>;

		gpmc,adv-wr-off-ns = <30>;

		gpmc,oe-on-ns = <40>;

		gpmc,oe-off-ns = <160>;

		gpmc,we-on-ns = <40>;

		gpmc,we-off-ns = <160>;

		gpmc,rd-cycle-ns = <160>;

		gpmc,wr-cycle-ns = <160>;

		gpmc,access-ns = <150>;

		gpmc,page-burst-access-ns = <10>;

		gpmc,cycle2cycle-samecsen;

		gpmc,cycle2cycle-delay-ns = <20>;

		gpmc,wr-data-mux-bus-ns = <70>;

		gpmc,wr-access-ns = <80>;



		#address-cells = <1>;

		#size-cells = <1>;



		/*

		MTD partition table

		===================

		+------------+-->0x00000000-> U-Boot start

		|            |

		|            |-->0x000BFFFF-> U-Boot end

		|            |-->0x000C0000-> ENV1 start

		|            |

		|            |-->0x000DFFFF-> ENV1 end

		|            |-->0x000E0000-> ENV2 start

		|            |

		|            |-->0x000FFFFF-> ENV2 end

		|            |-->0x00100000-> Kernel start

		|            |

		|            |-->0x004FFFFF-> Kernel end

		|            |-->0x00500000-> File system start

		|            |

		|            |-->0x014FFFFF-> File system end

		|            |-->0x01500000-> User data start

		|            |

		|            |-->0x03FFFFFF-> User data end

		|            |-->0x04000000-> Data storage start

		|            |

		+------------+-->0x08000000-> NOR end (Free end)

		*/

		partition@0 {

			label = "boot";

			reg = <0x00000000 0x000c0000>; /* 768KB */

		};



		partition@1 {

			label = "env1";

			reg = <0x000c0000 0x00020000>; /* 128KB */

		};



		partition@2 {

			label = "env2";

			reg = <0x000e0000 0x00020000>; /* 128KB */

		};



		partition@3 {

			label = "kernel";

			reg = <0x00100000 0x00400000>; /* 4MB */

		};



		partition@4 {

			label = "rootfs";

			reg = <0x00500000 0x01000000>; /* 16MB */

		};



		partition@5 {

			label = "user";

			reg = <0x01500000 0x02b00000>; /* 43MB */

		};



		partition@6 {

			label = "data";

			reg = <0x04000000 0x04000000>; /* 64MB */

		};

	};

};



&mac {

	dual_emac = <1>;

};



&cpsw_emac0 {

	phy_id = <&davinci_mdio>, <0>;

	dual_emac_res_vlan = <1>;

};



&cpsw_emac1 {

	phy_id = <&davinci_mdio>, <1>;

	dual_emac_res_vlan = <2>;

};



&mmc1 {

	status = "okay";

	vmmc-supply = <&ldo4_reg>;

	pinctrl-names = "default";

	pinctrl-0 = <&mmc1_pins>;

	bus-width = <4>;

	cd-gpios = <&gpio3 8 0>;

	wp-gpios = <&gpio3 18 0>;

};



#include "tps65217.dtsi"



&tps {

	regulators {

		dcdc1_reg: regulator@0 {

			/* +1.5V voltage with ±4% tolerance */

			regulator-min-microvolt = <1450000>;

			regulator-max-microvolt = <1550000>;

			regulator-boot-on;

			regulator-always-on;

		};



		dcdc2_reg: regulator@1 {

			/* VDD_MPU voltage limits 0.95V - 1.1V with ±4% tolerance */

			regulator-name = "vdd_mpu";

			regulator-min-microvolt = <915000>;

			regulator-max-microvolt = <1140000>;

			regulator-boot-on;

			regulator-always-on;

		};



		dcdc3_reg: regulator@2 {

			/* VDD_CORE voltage limits 0.95V - 1.1V with ±4% tolerance */

			regulator-name = "vdd_core";

			regulator-min-microvolt = <915000>;

			regulator-max-microvolt = <1140000>;

			regulator-boot-on;

			regulator-always-on;

		};



		ldo1_reg: regulator@3 {

			/* +1.8V voltage with ±4% tolerance */

			regulator-min-microvolt = <1750000>;

			regulator-max-microvolt = <1870000>;

			regulator-boot-on;

			regulator-always-on;

		};



		ldo2_reg: regulator@4 {

			/* +3.3V voltage with ±4% tolerance */

			regulator-min-microvolt = <3175000>;

			regulator-max-microvolt = <3430000>;

			regulator-boot-on;

			regulator-always-on;

		};



		ldo3_reg: regulator@5 {

			/* +1.8V voltage with ±4% tolerance */

			regulator-min-microvolt = <1750000>;

			regulator-max-microvolt = <1870000>;

			regulator-boot-on;

			regulator-always-on;

		};



		ldo4_reg: regulator@6 {

			/* +3.3V voltage with ±4% tolerance */

			regulator-min-microvolt = <3175000>;

			regulator-max-microvolt = <3430000>;

			regulator-boot-on;

			regulator-always-on;

		};

	};

};

arch/arm/boot/dts/am33xx.dtsi

+3 −3
Original line number Diff line number Diff line
@@ -416,7 +416,7 @@ 
			ti,hwmods = "usb_otg_hs";

			status = "disabled";



			ctrl_mod: control@44e10000 {

			usb_ctrl_mod: control@44e10000 {

				compatible = "ti,am335x-usb-ctrl-module";

				reg = <0x44e10620 0x10

					0x44e10648 0x4>;
@@ -429,7 +429,7 @@ 
				reg = <0x47401300 0x100>;

				reg-names = "phy";

				status = "disabled";

				ti,ctrl_mod = <&ctrl_mod>;

				ti,ctrl_mod = <&usb_ctrl_mod>;

			};



			usb0: usb@47401000 {
@@ -477,7 +477,7 @@ 
				reg = <0x47401b00 0x100>;

				reg-names = "phy";

				status = "disabled";

				ti,ctrl_mod = <&ctrl_mod>;

				ti,ctrl_mod = <&usb_ctrl_mod>;

			};



			usb1: usb@47401800 {

arch/arm/boot/dts/dra7-evm.dts

+4 −0
Original line number Diff line number Diff line
@@ -269,3 +269,7 @@ 
	vmmc-supply = <&mmc2_3v3>;

	bus-width = <8>;

};



&cpu0 {

	cpu0-supply = <&smps123_reg>;

};

CRA Git | Maintained and supported by SUSTech CRA and CCSE