ARM: dts: cfa10036: Change the OLED display to SSD1306 (b400932c) · Commits · 戴 / test

The SSD1307 was used in an early prototype that will never get distributed. The final board now has a SSD1306 instead, that has its own power generation unit and thus doesn't need any PWM. The panel attached to it also changed. Signed-off-by:

Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by:

Shawn Guo <shawn.guo@linaro.org>

arch/arm/boot/dts/imx28-cfa10036.dts

+5 −9

Original line number	Diff line number	Diff line
		@@ -58,12 +58,6 @@
		};

		apbx@80040000 {
		pwm: pwm@80064000 {
		pinctrl-names = "default";
		pinctrl-0 = <&pwm4_pins_a>;
		status = "okay";
		};

		duart: serial@80074000 {
		pinctrl-names = "default";
		pinctrl-0 = <&duart_pins_b>;
		@@ -75,11 +69,13 @@
		pinctrl-0 = <&i2c0_pins_b>;
		status = "okay";

		ssd1307: oled@3c {
		compatible = "solomon,ssd1307fb-i2c";
		ssd1306: oled@3c {
		compatible = "solomon,ssd1306fb-i2c";
		reg = <0x3c>;
		pwms = <&pwm 4 3000>;
		reset-gpios = <&gpio2 7 0>;
		solomon,height = <32>;
		solomon,width = <128>;
		solomon,page-offset = <0>;
		};
		};
		};

arch/arm/boot/dts/imx28-cfa10049.dts

+2 −2

Original line number	Diff line number	Diff line
		@@ -166,8 +166,8 @@

		apbx@80040000 {
		pwm: pwm@80064000 {
		pinctrl-names = "default", "default";
		pinctrl-1 = <&pwm3_pins_b>;
		pinctrl-names = "default";
		pinctrl-0 = <&pwm3_pins_b>;
		status = "okay";
		};

Admin message