Commit b3dd65f9 authored by Krzysztof Halasa's avatar Krzysztof Halasa Committed by Jeff Garzik
Browse files

[PATCH] Generic HDLC update 



The attached patch updates generic HDLC to version 1.18.
FR Cisco LMI production-tested. Please apply to Linux 2.6. Thanks.

Changes:
- doc updates
- added Cisco LMI support to Frame-Relay code
- cleaned hdlc_fr.c a bit, removed some orphaned #defines etc.
- fixed a problem with non-functional LMI in FR DCE mode.
- changed diagnostic messages to better conform to FR standards
- all protocols: information about carrier changes (DCD line) is now
  printed to kernel logs.

Signed-Off-By: default avatarKrzysztof Halasa <khc@pm.waw.pl>
parent 88d7bd8c

Documentation/networking/generic-hdlc.txt

+26 −25
Original line number Diff line number Diff line 
Generic HDLC layer

Krzysztof Halasa <khc@pm.waw.pl>

January, 2003





Generic HDLC layer currently supports:

- Frame Relay (ANSI, CCITT and no LMI), with ARP support (no InARP).

  Normal (routed) and Ethernet-bridged (Ethernet device emulation)

1. Frame Relay (ANSI, CCITT, Cisco and no LMI).

   - Normal (routed) and Ethernet-bridged (Ethernet device emulation)

     interfaces can share a single PVC.

- raw HDLC - either IP (IPv4) interface or Ethernet device emulation.

- Cisco HDLC,

- PPP (uses syncppp.c),

- X.25 (uses X.25 routines).

   - ARP support (no InARP support in the kernel - there is an

     experimental InARP user-space daemon available on:

     http://www.kernel.org/pub/linux/utils/net/hdlc/).

2. raw HDLC - either IP (IPv4) interface or Ethernet device emulation.

3. Cisco HDLC.

4. PPP (uses syncppp.c).

5. X.25 (uses X.25 routines).



There are hardware drivers for the following cards:

- C101 by Moxa Technologies Co., Ltd.

- RISCom/N2 by SDL Communications Inc.

- and others, some not in the official kernel.

Generic HDLC is a protocol driver only - it needs a low-level driver

for your particular hardware.



Ethernet device emulation (using HDLC or Frame-Relay PVC) is compatible

with IEEE 802.1Q (VLANs) and 802.1D (Ethernet bridging).
@@ -24,7 +24,7 @@ with IEEE 802.1Q (VLANs) and 802.1D (Ethernet bridging). 
Make sure the hdlc.o and the hardware driver are loaded. It should

create a number of "hdlc" (hdlc0 etc) network devices, one for each

WAN port. You'll need the "sethdlc" utility, get it from:

	http://hq.pm.waw.pl/hdlc/

	http://www.kernel.org/pub/linux/utils/net/hdlc/



Compile sethdlc.c utility:

	gcc -O2 -Wall -o sethdlc sethdlc.c
@@ -52,12 +52,12 @@ Setting interface: 
* v35 | rs232 | x21 | t1 | e1 - sets physical interface for a given port

                                if the card has software-selectable interfaces

  loopback - activate hardware loopback (for testing only)

* clock ext - external clock (uses DTE RX and TX clock)

* clock int - internal clock (provides clock signal on DCE clock output)

* clock txint - TX internal, RX external (provides TX clock on DCE output)

* clock txfromrx - TX clock derived from RX clock (TX clock on DCE output)

* rate - sets clock rate in bps (not required for external clock or

                                 for txfromrx)

* clock ext - both RX clock and TX clock external

* clock int - both RX clock and TX clock internal

* clock txint - RX clock external, TX clock internal

* clock txfromrx - RX clock external, TX clock derived from RX clock

* rate - sets clock rate in bps (for "int" or "txint" clock only)





Setting protocol:
@@ -79,7 +79,7 @@ Setting protocol: 
* x25 - sets X.25 mode



* fr - Frame Relay mode

  lmi ansi / ccitt / none - LMI (link management) type

  lmi ansi / ccitt / cisco / none - LMI (link management) type

  dce - Frame Relay DCE (network) side LMI instead of default DTE (user).

  It has nothing to do with clocks!

  t391 - link integrity verification polling timer (in seconds) - user
@@ -119,13 +119,14 @@ or 






If you have a problem with N2 or C101 card, you can issue the "private"

command to see port's packet descriptor rings (in kernel logs):

If you have a problem with N2, C101 or PLX200SYN card, you can issue the

"private" command to see port's packet descriptor rings (in kernel logs):



	sethdlc hdlc0 private



The hardware driver has to be build with CONFIG_HDLC_DEBUG_RINGS.

The hardware driver has to be build with #define DEBUG_RINGS.

Attaching this info to bug reports would be helpful. Anyway, let me know

if you have problems using this.



For patches and other info look at http://hq.pm.waw.pl/hdlc/
 
For patches and other info look at:

<http://www.kernel.org/pub/linux/utils/net/hdlc/>.

drivers/net/wan/hdlc_fr.c

+176 −144
Original line number Diff line number Diff line
@@ -2,7 +2,7 @@ 
 * Generic HDLC support routines for Linux

 * Frame Relay support

 *

 * Copyright (C) 1999 - 2003 Krzysztof Halasa <khc@pm.waw.pl>

 * Copyright (C) 1999 - 2005 Krzysztof Halasa <khc@pm.waw.pl>

 *

 * This program is free software; you can redistribute it and/or modify it

 * under the terms of version 2 of the GNU General Public License
@@ -27,6 +27,10 @@ 
 active = open and "link reliable"

 exist = new = not used



 CCITT LMI: ITU-T Q.933 Annex A

 ANSI LMI: ANSI T1.617 Annex D

 CISCO LMI: the original, aka "Gang of Four" LMI



*/



#include <linux/module.h>
@@ -49,14 +53,6 @@ 
#undef DEBUG_ECN

#undef DEBUG_LINK



#define MAXLEN_LMISTAT  20	/* max size of status enquiry frame */



#define PVC_STATE_NEW	 0x01

#define PVC_STATE_ACTIVE 0x02

#define PVC_STATE_FECN	 0x08 /* FECN condition */

#define PVC_STATE_BECN	 0x10 /* BECN condition */





#define FR_UI			0x03

#define FR_PAD			0x00
@@ -64,29 +60,33 @@ 
#define NLPID_IPV6		0x8E

#define NLPID_SNAP		0x80

#define NLPID_PAD		0x00

#define NLPID_Q933	 0x08

#define NLPID_CCITT_ANSI_LMI	0x08

#define NLPID_CISCO_LMI		0x09





#define LMI_CCITT_ANSI_DLCI	   0 /* LMI DLCI */

#define LMI_CISCO_DLCI		1023



#define LMI_DLCI                   0 /* LMI DLCI */

#define LMI_PROTO               0x08

#define LMI_CALLREF		0x00 /* Call Reference */

#define LMI_ANSI_LOCKSHIFT      0x95 /* ANSI lockshift */

#define LMI_REPTYPE                1 /* report type */

#define LMI_ANSI_LOCKSHIFT	0x95 /* ANSI locking shift */

#define LMI_ANSI_CISCO_REPTYPE	0x01 /* report type */

#define LMI_CCITT_REPTYPE	0x51

#define LMI_ALIVE                  3 /* keep alive */

#define LMI_ANSI_CISCO_ALIVE	0x03 /* keep alive */

#define LMI_CCITT_ALIVE		0x53

#define LMI_PVCSTAT                7 /* pvc status */

#define LMI_ANSI_CISCO_PVCSTAT	0x07 /* PVC status */

#define LMI_CCITT_PVCSTAT	0x57

#define LMI_FULLREP                0 /* full report  */

#define LMI_INTEGRITY              1 /* link integrity report */

#define LMI_SINGLE                 2 /* single pvc report */



#define LMI_FULLREP		0x00 /* full report  */

#define LMI_INTEGRITY		0x01 /* link integrity report */

#define LMI_SINGLE		0x02 /* single PVC report */



#define LMI_STATUS_ENQUIRY      0x75

#define LMI_STATUS              0x7D /* reply */



#define LMI_REPT_LEN               1 /* report type element length */

#define LMI_INTEG_LEN              2 /* link integrity element length */



#define LMI_LENGTH                13 /* standard LMI frame length */

#define LMI_CCITT_CISCO_LENGTH	  13 /* LMI frame lengths */

#define LMI_ANSI_LENGTH		  14
@@ -223,51 +223,34 @@ static inline struct net_device** get_dev_p(pvc_device *pvc, int type) 
}





static inline u16 status_to_dlci(u8 *status, int *active, int *new)

{

	*new = (status[2] & 0x08) ? 1 : 0;

	*active = (status[2] & 0x02) ? 1 : 0;



	return ((status[0] & 0x3F) << 4) | ((status[1] & 0x78) >> 3);

}





static inline void dlci_to_status(u16 dlci, u8 *status, int active, int new)

{

	status[0] = (dlci >> 4) & 0x3F;

	status[1] = ((dlci << 3) & 0x78) | 0x80;

	status[2] = 0x80;



	if (new)

		status[2] |= 0x08;

	else if (active)

		status[2] |= 0x02;

}







static int fr_hard_header(struct sk_buff **skb_p, u16 dlci)

{

	u16 head_len;

	struct sk_buff *skb = *skb_p;



	switch (skb->protocol) {

	case __constant_ntohs(ETH_P_IP):

	case __constant_ntohs(NLPID_CCITT_ANSI_LMI):

		head_len = 4;

		skb_push(skb, head_len);

		skb->data[3] = NLPID_IP;

		skb->data[3] = NLPID_CCITT_ANSI_LMI;

		break;



	case __constant_ntohs(ETH_P_IPV6):

	case __constant_ntohs(NLPID_CISCO_LMI):

		head_len = 4;

		skb_push(skb, head_len);

		skb->data[3] = NLPID_IPV6;

		skb->data[3] = NLPID_CISCO_LMI;

		break;



	case __constant_ntohs(ETH_P_IP):

		head_len = 4;

		skb_push(skb, head_len);

		skb->data[3] = NLPID_IP;

		break;



	case __constant_ntohs(LMI_PROTO):

	case __constant_ntohs(ETH_P_IPV6):

		head_len = 4;

		skb_push(skb, head_len);

		skb->data[3] = LMI_PROTO;

		skb->data[3] = NLPID_IPV6;

		break;



	case __constant_ntohs(ETH_P_802_3):
@@ -461,13 +444,14 @@ static void fr_lmi_send(struct net_device *dev, int fullrep) 
	hdlc_device *hdlc = dev_to_hdlc(dev);

	struct sk_buff *skb;

	pvc_device *pvc = hdlc->state.fr.first_pvc;

	int len = (hdlc->state.fr.settings.lmi == LMI_ANSI) ? LMI_ANSI_LENGTH

		: LMI_LENGTH;

	int stat_len = 3;

	int lmi = hdlc->state.fr.settings.lmi;

	int dce = hdlc->state.fr.settings.dce;

	int len = lmi == LMI_ANSI ? LMI_ANSI_LENGTH : LMI_CCITT_CISCO_LENGTH;

	int stat_len = (lmi == LMI_CISCO) ? 6 : 3;

	u8 *data;

	int i = 0;



	if (hdlc->state.fr.settings.dce && fullrep) {

	if (dce && fullrep) {

		len += hdlc->state.fr.dce_pvc_count * (2 + stat_len);

		if (len > HDLC_MAX_MRU) {

			printk(KERN_WARNING "%s: Too many PVCs while sending "
@@ -484,29 +468,31 @@ static void fr_lmi_send(struct net_device *dev, int fullrep) 
	}

	memset(skb->data, 0, len);

	skb_reserve(skb, 4);

	skb->protocol = __constant_htons(LMI_PROTO);

	fr_hard_header(&skb, LMI_DLCI);

	if (lmi == LMI_CISCO) {

		skb->protocol = __constant_htons(NLPID_CISCO_LMI);

		fr_hard_header(&skb, LMI_CISCO_DLCI);

	} else {

		skb->protocol = __constant_htons(NLPID_CCITT_ANSI_LMI);

		fr_hard_header(&skb, LMI_CCITT_ANSI_DLCI);

	}

	data = skb->tail;

	data[i++] = LMI_CALLREF;

	data[i++] = hdlc->state.fr.settings.dce

		? LMI_STATUS : LMI_STATUS_ENQUIRY;

	if (hdlc->state.fr.settings.lmi == LMI_ANSI)

	data[i++] = dce ? LMI_STATUS : LMI_STATUS_ENQUIRY;

	if (lmi == LMI_ANSI)

		data[i++] = LMI_ANSI_LOCKSHIFT;

	data[i++] = (hdlc->state.fr.settings.lmi == LMI_CCITT)

		? LMI_CCITT_REPTYPE : LMI_REPTYPE;

	data[i++] = lmi == LMI_CCITT ? LMI_CCITT_REPTYPE :

		LMI_ANSI_CISCO_REPTYPE;

	data[i++] = LMI_REPT_LEN;

	data[i++] = fullrep ? LMI_FULLREP : LMI_INTEGRITY;



	data[i++] = (hdlc->state.fr.settings.lmi == LMI_CCITT)

		? LMI_CCITT_ALIVE : LMI_ALIVE;

	data[i++] = lmi == LMI_CCITT ? LMI_CCITT_ALIVE : LMI_ANSI_CISCO_ALIVE;

	data[i++] = LMI_INTEG_LEN;

	data[i++] = hdlc->state.fr.txseq =fr_lmi_nextseq(hdlc->state.fr.txseq);

	data[i++] = hdlc->state.fr.rxseq;



	if (hdlc->state.fr.settings.dce && fullrep) {

	if (dce && fullrep) {

		while (pvc) {

			data[i++] = (hdlc->state.fr.settings.lmi == LMI_CCITT)

				? LMI_CCITT_PVCSTAT : LMI_PVCSTAT;

			data[i++] = lmi == LMI_CCITT ? LMI_CCITT_PVCSTAT :

				LMI_ANSI_CISCO_PVCSTAT;

			data[i++] = stat_len;



			/* LMI start/restart */
@@ -523,8 +509,20 @@ static void fr_lmi_send(struct net_device *dev, int fullrep) 
				fr_log_dlci_active(pvc);

			}



			dlci_to_status(pvc->dlci, data + i,

				       pvc->state.active, pvc->state.new);

			if (lmi == LMI_CISCO) {

				data[i] = pvc->dlci >> 8;

				data[i + 1] = pvc->dlci & 0xFF;

			} else {

				data[i] = (pvc->dlci >> 4) & 0x3F;

				data[i + 1] = ((pvc->dlci << 3) & 0x78) | 0x80;

				data[i + 2] = 0x80;

			}



			if (pvc->state.new)

				data[i + 2] |= 0x08;

			else if (pvc->state.active)

				data[i + 2] |= 0x02;



			i += stat_len;

			pvc = pvc->next;

		}
@@ -569,6 +567,8 @@ static void fr_set_link_state(int reliable, struct net_device *dev) 
			pvc_carrier(0, pvc);

			pvc->state.exist = pvc->state.active = 0;

			pvc->state.new = 0;

			if (!hdlc->state.fr.settings.dce)

				pvc->state.bandwidth = 0;

			pvc = pvc->next;

		}

	}
@@ -583,11 +583,12 @@ static void fr_timer(unsigned long arg) 
	int i, cnt = 0, reliable;

	u32 list;



	if (hdlc->state.fr.settings.dce)

	if (hdlc->state.fr.settings.dce) {

		reliable = hdlc->state.fr.request &&

			time_before(jiffies, hdlc->state.fr.last_poll +

				    hdlc->state.fr.settings.t392 * HZ);

	else {

		hdlc->state.fr.request = 0;

	} else {

		hdlc->state.fr.last_errors <<= 1; /* Shift the list */

		if (hdlc->state.fr.request) {

			if (hdlc->state.fr.reliable)
@@ -634,65 +635,88 @@ static void fr_timer(unsigned long arg) 
static int fr_lmi_recv(struct net_device *dev, struct sk_buff *skb)

{

	hdlc_device *hdlc = dev_to_hdlc(dev);

	int stat_len;

	pvc_device *pvc;

	int reptype = -1, error, no_ram;

	u8 rxseq, txseq;

	int i;

	int lmi = hdlc->state.fr.settings.lmi;

	int dce = hdlc->state.fr.settings.dce;

	int stat_len = (lmi == LMI_CISCO) ? 6 : 3, reptype, error, no_ram, i;



	if (skb->len < ((hdlc->state.fr.settings.lmi == LMI_ANSI)

			? LMI_ANSI_LENGTH : LMI_LENGTH)) {

	if (skb->len < (lmi == LMI_ANSI ? LMI_ANSI_LENGTH :

			LMI_CCITT_CISCO_LENGTH)) {

		printk(KERN_INFO "%s: Short LMI frame\n", dev->name);

		return 1;

	}



	if (skb->data[5] != (!hdlc->state.fr.settings.dce ?

			     LMI_STATUS : LMI_STATUS_ENQUIRY)) {

		printk(KERN_INFO "%s: LMI msgtype=%x, Not LMI status %s\n",

		       dev->name, skb->data[2],

		       hdlc->state.fr.settings.dce ? "enquiry" : "reply");

	if (skb->data[3] != (lmi == LMI_CISCO ? NLPID_CISCO_LMI :

			     NLPID_CCITT_ANSI_LMI)) {

		printk(KERN_INFO "%s: Received non-LMI frame with LMI"

		       " DLCI\n", dev->name);

		return 1;

	}



	if (skb->data[4] != LMI_CALLREF) {

		printk(KERN_INFO "%s: Invalid LMI Call reference (0x%02X)\n",

		       dev->name, skb->data[4]);

		return 1;

	}



	i = (hdlc->state.fr.settings.lmi == LMI_ANSI) ? 7 : 6;

	if (skb->data[5] != (dce ? LMI_STATUS_ENQUIRY : LMI_STATUS)) {

		printk(KERN_INFO "%s: Invalid LMI Message type (0x%02X)\n",

		       dev->name, skb->data[5]);

		return 1;

	}



	if (lmi == LMI_ANSI) {

		if (skb->data[6] != LMI_ANSI_LOCKSHIFT) {

			printk(KERN_INFO "%s: Not ANSI locking shift in LMI"

			       " message (0x%02X)\n", dev->name, skb->data[6]);

			return 1;

		}

		i = 7;

	} else

		i = 6;



	if (skb->data[i] !=

	    ((hdlc->state.fr.settings.lmi == LMI_CCITT)

	     ? LMI_CCITT_REPTYPE : LMI_REPTYPE)) {

		printk(KERN_INFO "%s: Not a report type=%x\n",

	if (skb->data[i] != (lmi == LMI_CCITT ? LMI_CCITT_REPTYPE :

			     LMI_ANSI_CISCO_REPTYPE)) {

		printk(KERN_INFO "%s: Not an LMI Report type IE (0x%02X)\n",

		       dev->name, skb->data[i]);

		return 1;

	}

	i++;



	i++;				/* Skip length field */

	if (skb->data[++i] != LMI_REPT_LEN) {

		printk(KERN_INFO "%s: Invalid LMI Report type IE length"

		       " (%u)\n", dev->name, skb->data[i]);

		return 1;

	}



	reptype = skb->data[i++];

	reptype = skb->data[++i];

	if (reptype != LMI_INTEGRITY && reptype != LMI_FULLREP) {

		printk(KERN_INFO "%s: Unsupported LMI Report type (0x%02X)\n",

		       dev->name, reptype);

		return 1;

	}



	if (skb->data[i]!=

	    ((hdlc->state.fr.settings.lmi == LMI_CCITT)

	     ? LMI_CCITT_ALIVE : LMI_ALIVE)) {

		printk(KERN_INFO "%s: Unsupported status element=%x\n",

		       dev->name, skb->data[i]);

	if (skb->data[++i] != (lmi == LMI_CCITT ? LMI_CCITT_ALIVE :

			       LMI_ANSI_CISCO_ALIVE)) {

		printk(KERN_INFO "%s: Not an LMI Link integrity verification"

		       " IE (0x%02X)\n", dev->name, skb->data[i]);

		return 1;

	}

	i++;



	i++;			/* Skip length field */

	if (skb->data[++i] != LMI_INTEG_LEN) {

		printk(KERN_INFO "%s: Invalid LMI Link integrity verification"

		       " IE length (%u)\n", dev->name, skb->data[i]);

		return 1;

	}

	i++;



	hdlc->state.fr.rxseq = skb->data[i++]; /* TX sequence from peer */

	rxseq = skb->data[i++];	/* Should confirm our sequence */



	txseq = hdlc->state.fr.txseq;



	if (hdlc->state.fr.settings.dce) {

		if (reptype != LMI_FULLREP && reptype != LMI_INTEGRITY) {

			printk(KERN_INFO "%s: Unsupported report type=%x\n",

			       dev->name, reptype);

			return 1;

		}

	if (dce)

		hdlc->state.fr.last_poll = jiffies;

	}



	error = 0;

	if (!hdlc->state.fr.reliable)
@@ -703,7 +727,7 @@ static int fr_lmi_recv(struct net_device *dev, struct sk_buff *skb) 
		error = 1;

	}



	if (hdlc->state.fr.settings.dce) {

	if (dce) {

		if (hdlc->state.fr.fullrep_sent && !error) {

/* Stop sending full report - the last one has been confirmed by DTE */

			hdlc->state.fr.fullrep_sent = 0;
@@ -725,6 +749,7 @@ static int fr_lmi_recv(struct net_device *dev, struct sk_buff *skb) 
			hdlc->state.fr.dce_changed = 0;

		}



		hdlc->state.fr.request = 1; /* got request */

		fr_lmi_send(dev, reptype == LMI_FULLREP ? 1 : 0);

		return 0;

	}
@@ -739,7 +764,6 @@ static int fr_lmi_recv(struct net_device *dev, struct sk_buff *skb) 
	if (reptype != LMI_FULLREP)

		return 0;



	stat_len = 3;

	pvc = hdlc->state.fr.first_pvc;



	while (pvc) {
@@ -750,24 +774,35 @@ static int fr_lmi_recv(struct net_device *dev, struct sk_buff *skb) 
	no_ram = 0;

	while (skb->len >= i + 2 + stat_len) {

		u16 dlci;

		u32 bw;

		unsigned int active, new;



		if (skb->data[i] != ((hdlc->state.fr.settings.lmi == LMI_CCITT)

				     ? LMI_CCITT_PVCSTAT : LMI_PVCSTAT)) {

			printk(KERN_WARNING "%s: Invalid PVCSTAT ID: %x\n",

			       dev->name, skb->data[i]);

		if (skb->data[i] != (lmi == LMI_CCITT ? LMI_CCITT_PVCSTAT :

				       LMI_ANSI_CISCO_PVCSTAT)) {

			printk(KERN_INFO "%s: Not an LMI PVC status IE"

			       " (0x%02X)\n", dev->name, skb->data[i]);

			return 1;

		}

		i++;



		if (skb->data[i] != stat_len) {

			printk(KERN_WARNING "%s: Invalid PVCSTAT length: %x\n",

			       dev->name, skb->data[i]);

		if (skb->data[++i] != stat_len) {

			printk(KERN_INFO "%s: Invalid LMI PVC status IE length"

			       " (%u)\n", dev->name, skb->data[i]);

			return 1;

		}

		i++;



		dlci = status_to_dlci(skb->data + i, &active, &new);

		new = !! (skb->data[i + 2] & 0x08);

		active = !! (skb->data[i + 2] & 0x02);

		if (lmi == LMI_CISCO) {

			dlci = (skb->data[i] << 8) | skb->data[i + 1];

			bw = (skb->data[i + 3] << 16) |

				(skb->data[i + 4] << 8) |

				(skb->data[i + 5]);

		} else {

			dlci = ((skb->data[i] & 0x3F) << 4) |

				((skb->data[i + 1] & 0x78) >> 3);

			bw = 0;

		}



		pvc = add_pvc(dev, dlci);
@@ -783,9 +818,11 @@ static int fr_lmi_recv(struct net_device *dev, struct sk_buff *skb) 
			pvc->state.deleted = 0;

			if (active != pvc->state.active ||

			    new != pvc->state.new ||

			    bw != pvc->state.bandwidth ||

			    !pvc->state.exist) {

				pvc->state.new = new;

				pvc->state.active = active;

				pvc->state.bandwidth = bw;

				pvc_carrier(active, pvc);

				fr_log_dlci_active(pvc);

			}
@@ -801,6 +838,7 @@ static int fr_lmi_recv(struct net_device *dev, struct sk_buff *skb) 
			pvc_carrier(0, pvc);

			pvc->state.active = pvc->state.new = 0;

			pvc->state.exist = 0;

			pvc->state.bandwidth = 0;

			fr_log_dlci_active(pvc);

		}

		pvc = pvc->next;
@@ -829,23 +867,16 @@ static int fr_rx(struct sk_buff *skb) 


	dlci = q922_to_dlci(skb->data);



	if (dlci == LMI_DLCI) {

		if (hdlc->state.fr.settings.lmi == LMI_NONE)

			goto rx_error; /* LMI packet with no LMI? */



		if (data[3] == LMI_PROTO) {

	if ((dlci == LMI_CCITT_ANSI_DLCI &&

	     (hdlc->state.fr.settings.lmi == LMI_ANSI ||

	      hdlc->state.fr.settings.lmi == LMI_CCITT)) ||

	    (dlci == LMI_CISCO_DLCI &&

	     hdlc->state.fr.settings.lmi == LMI_CISCO)) {

		if (fr_lmi_recv(ndev, skb))

			goto rx_error;

			else {

		dev_kfree_skb_any(skb);

		return NET_RX_SUCCESS;

	}

		}



		printk(KERN_INFO "%s: Received non-LMI frame with LMI DLCI\n",

		       ndev->name);

		goto rx_error;

	}



	pvc = find_pvc(hdlc, dlci);

	if (!pvc) {
@@ -1170,7 +1201,8 @@ int hdlc_fr_ioctl(struct net_device *dev, struct ifreq *ifr) 


		if ((new_settings.lmi != LMI_NONE &&

		     new_settings.lmi != LMI_ANSI &&

		     new_settings.lmi != LMI_CCITT) ||

		     new_settings.lmi != LMI_CCITT &&

		     new_settings.lmi != LMI_CISCO) ||

		    new_settings.t391 < 1 ||

		    new_settings.t392 < 2 ||

		    new_settings.n391 < 1 ||

drivers/net/wan/hdlc_generic.c

+11 −5
Original line number Diff line number Diff line 
/*

 * Generic HDLC support routines for Linux

 *

 * Copyright (C) 1999 - 2003 Krzysztof Halasa <khc@pm.waw.pl>

 * Copyright (C) 1999 - 2005 Krzysztof Halasa <khc@pm.waw.pl>

 *

 * This program is free software; you can redistribute it and/or modify it

 * under the terms of version 2 of the GNU General Public License
@@ -38,7 +38,7 @@ 
#include <linux/hdlc.h>





static const char* version = "HDLC support module revision 1.17";

static const char* version = "HDLC support module revision 1.18";



#undef DEBUG_LINK
@@ -126,10 +126,13 @@ void hdlc_set_carrier(int on, struct net_device *dev) 
	if (!hdlc->open)

		goto carrier_exit;



	if (hdlc->carrier)

	if (hdlc->carrier) {

		printk(KERN_INFO "%s: Carrier detected\n", dev->name);

		__hdlc_set_carrier_on(dev);

	else

	} else {

		printk(KERN_INFO "%s: Carrier lost\n", dev->name);

		__hdlc_set_carrier_off(dev);

	}



carrier_exit:

	spin_unlock_irqrestore(&hdlc->state_lock, flags);
@@ -157,8 +160,11 @@ int hdlc_open(struct net_device *dev) 


	spin_lock_irq(&hdlc->state_lock);



	if (hdlc->carrier)

	if (hdlc->carrier) {

		printk(KERN_INFO "%s: Carrier detected\n", dev->name);

		__hdlc_set_carrier_on(dev);

	} else

		printk(KERN_INFO "%s: No carrier\n", dev->name);



	hdlc->open = 1;

include/linux/hdlc.h

+3 −1
Original line number Diff line number Diff line 
/*

 * Generic HDLC support routines for Linux

 *

 * Copyright (C) 1999-2003 Krzysztof Halasa <khc@pm.waw.pl>

 * Copyright (C) 1999-2005 Krzysztof Halasa <khc@pm.waw.pl>

 *

 * This program is free software; you can redistribute it and/or modify it

 * under the terms of version 2 of the GNU General Public License
@@ -41,6 +41,7 @@ 
#define LMI_NONE		1 /* No LMI, all PVCs are static */

#define LMI_ANSI		2 /* ANSI Annex D */

#define LMI_CCITT		3 /* ITU-T Annex A */

#define LMI_CISCO		4 /* The "original" LMI, aka Gang of Four */



#define HDLC_MAX_MTU 1500	/* Ethernet 1500 bytes */

#define HDLC_MAX_MRU (HDLC_MAX_MTU + 10 + 14 + 4) /* for ETH+VLAN over FR */
@@ -89,6 +90,7 @@ typedef struct pvc_device_struct { 
		unsigned int deleted: 1;

		unsigned int fecn: 1;

		unsigned int becn: 1;

		unsigned int bandwidth;	/* Cisco LMI reporting only */

	}state;

}pvc_device;

CRA Git | Maintained and supported by SUSTech CRA and CCSE