Commit b3b27005 authored by Peter Korsgaard's avatar Peter Korsgaard Committed by David S. Miller
Browse files

dsa/mv88e6131: fix unknown multicast/broadcast forwarding on mv88e6085 



The 88e6085 has a few differences from the other devices in the port
control registers, causing unknown multicast/broadcast packets to get
dropped when using the standard port setup.

At the same time update kconfig to clarify that the mv88e6085 is now
supported.

Signed-off-by: default avatarPeter Korsgaard <jacmet@sunsite.dk>
Acked-by: default avatarLennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 68972efa

net/dsa/Kconfig

+2 −2
Original line number Diff line number Diff line
@@ -41,12 +41,12 @@ config NET_DSA_MV88E6XXX_NEED_PPU 
	default n



config NET_DSA_MV88E6131

	bool "Marvell 88E6095/6095F/6131 ethernet switch chip support"

	bool "Marvell 88E6085/6095/6095F/6131 ethernet switch chip support"

	select NET_DSA_MV88E6XXX

	select NET_DSA_MV88E6XXX_NEED_PPU

	select NET_DSA_TAG_DSA

	---help---

	  This enables support for the Marvell 88E6095/6095F/6131

	  This enables support for the Marvell 88E6085/6095/6095F/6131

	  ethernet switch chips.



config NET_DSA_MV88E6123_61_65

net/dsa/mv88e6131.c

+21 −5
Original line number Diff line number Diff line
@@ -207,8 +207,15 @@ static int mv88e6131_setup_port(struct dsa_switch *ds, int p) 
	 * mode, but do not enable forwarding of unknown unicasts.

	 */

	val = 0x0433;

	if (p == dsa_upstream_port(ds))

	if (p == dsa_upstream_port(ds)) {

		val |= 0x0104;

		/*

		 * On 6085, unknown multicast forward is controlled

		 * here rather than in Port Control 2 register.

		 */

		if (ps->id == ID_6085)

			val |= 0x0008;

	}

	if (ds->dsa_port_mask & (1 << p))

		val |= 0x0100;

	REG_WRITE(addr, 0x04, val);
@@ -251,10 +258,19 @@ static int mv88e6131_setup_port(struct dsa_switch *ds, int p) 
	 * If this is the upstream port for this switch, enable

	 * forwarding of unknown multicast addresses.

	 */

	if (ps->id == ID_6085)

		/*

		 * on 6085, bits 3:0 are reserved, bit 6 control ARP

		 * mirroring, and multicast forward is handled in

		 * Port Control register.

		 */

		REG_WRITE(addr, 0x08, 0x0080);

	else {

		val = 0x0080 | dsa_upstream_port(ds);

		if (p == dsa_upstream_port(ds))

			val |= 0x0040;

		REG_WRITE(addr, 0x08, val);

	}



	/*

	 * Rate Control: disable ingress rate limiting.

CRA Git | Maintained and supported by SUSTech CRA and CCSE