Commit b31506c4 authored by Michael Krufky's avatar Michael Krufky Committed by Mauro Carvalho Chehab
Browse files

[media] au8522: build ATV/DTV demodulators as separate modules 



au8522_dig.o and au8522_decoder.o function independentantly
of each other, each for a different hardware function using
a different software subsystem api, each with its own set
of subsystem module dependencies.

Since these drivers do not depend on each other, and it is
in fact possible to build hardware designs using one function
and not the other, lets split this module into two, allowing
system integrators to enable the hardware without dragging in
undesired dependencies.

Signed-off-by: default avatarMichael Krufky <mkrufky@kernellabs.com>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@redhat.com>
parent be183dc3

drivers/media/dvb/frontends/Kconfig

+18 −4
Original line number Diff line number Diff line
@@ -540,12 +540,26 @@ config DVB_S5H1409 
	  to support this frontend.



config DVB_AU8522

	tristate "Auvitek AU8522 based"

	depends on DVB_CORE && I2C && VIDEO_V4L2

	depends on I2C

	tristate



config DVB_AU8522_DTV

	tristate "Auvitek AU8522 based DTV demod"

	depends on DVB_CORE && I2C

	select DVB_AU8522

	default m if DVB_FE_CUSTOMISE

	help

	  An ATSC 8VSB and QAM64/256 tuner module. Say Y when you want

	  to support this frontend.

	  An ATSC 8VSB, QAM64/256 & NTSC demodulator module. Say Y when

	  you want to enable DTV demodulation support for this frontend.



config DVB_AU8522_V4L

	tristate "Auvitek AU8522 based ATV demod"

	depends on VIDEO_V4L2 && I2C

	select DVB_AU8522

	default m if DVB_FE_CUSTOMISE

	help

	  An ATSC 8VSB, QAM64/256 & NTSC demodulator module. Say Y when

	  you want to enable ATV demodulation support for this frontend.



config DVB_S5H1411

	tristate "Samsung S5H1411 based"

drivers/media/dvb/frontends/Makefile

+3 −2
Original line number Diff line number Diff line
@@ -7,7 +7,6 @@ ccflags-y += -I$(srctree)/drivers/media/common/tuners/ 


stb0899-objs = stb0899_drv.o stb0899_algo.o

stv0900-objs = stv0900_core.o stv0900_sw.o

au8522-objs = au8522_dig.o au8522_decoder.o

drxd-objs = drxd_firm.o drxd_hard.o

cxd2820r-objs = cxd2820r_core.o cxd2820r_c.o cxd2820r_t.o cxd2820r_t2.o

drxk-objs := drxk_hard.o
@@ -63,7 +62,9 @@ obj-$(CONFIG_DVB_TUNER_DIB0090) += dib0090.o 
obj-$(CONFIG_DVB_TUA6100) += tua6100.o

obj-$(CONFIG_DVB_S5H1409) += s5h1409.o

obj-$(CONFIG_DVB_TUNER_ITD1000) += itd1000.o

obj-$(CONFIG_DVB_AU8522) += au8522.o

obj-$(CONFIG_DVB_AU8522) += au8522_common.o

obj-$(CONFIG_DVB_AU8522_DTV) += au8522_dig.o

obj-$(CONFIG_DVB_AU8522_V4L) += au8522_decoder.o

obj-$(CONFIG_DVB_TDA10048) += tda10048.o

obj-$(CONFIG_DVB_TUNER_CX24113) += cx24113.o

obj-$(CONFIG_DVB_S5H1411) += s5h1411.o

drivers/media/dvb/frontends/au8522_common.c

0 → 100644
+258 −0
Original line number Diff line number Diff line 
/*

    Auvitek AU8522 QAM/8VSB demodulator driver



    Copyright (C) 2008 Steven Toth <stoth@linuxtv.org>

    Copyright (C) 2008 Devin Heitmueller <dheitmueller@linuxtv.org>

    Copyright (C) 2005-2008 Auvitek International, Ltd.

    Copyright (C) 2012 Michael Krufky <mkrufky@linuxtv.org>



    This program is free software; you can redistribute it and/or modify

    it under the terms of the GNU General Public License as published by

    the Free Software Foundation; either version 2 of the License, or

    (at your option) any later version.



    This program is distributed in the hope that it will be useful,

    but WITHOUT ANY WARRANTY; without even the implied warranty of

    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

    GNU General Public License for more details.



    You should have received a copy of the GNU General Public License

    along with this program; if not, write to the Free Software

    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.



*/



#include <linux/i2c.h>

#include "dvb_frontend.h"

#include "au8522_priv.h"



static int debug;



#define dprintk(arg...)\

  do { if (debug)\

	 printk(arg);\

  } while (0)



/* Despite the name "hybrid_tuner", the framework works just as well for

   hybrid demodulators as well... */

static LIST_HEAD(hybrid_tuner_instance_list);

static DEFINE_MUTEX(au8522_list_mutex);



/* 16 bit registers, 8 bit values */

int au8522_writereg(struct au8522_state *state, u16 reg, u8 data)

{

	int ret;

	u8 buf[] = { (reg >> 8) | 0x80, reg & 0xff, data };



	struct i2c_msg msg = { .addr = state->config->demod_address,

			       .flags = 0, .buf = buf, .len = 3 };



	ret = i2c_transfer(state->i2c, &msg, 1);



	if (ret != 1)

		printk("%s: writereg error (reg == 0x%02x, val == 0x%04x, "

		       "ret == %i)\n", __func__, reg, data, ret);



	return (ret != 1) ? -1 : 0;

}

EXPORT_SYMBOL(au8522_writereg);



u8 au8522_readreg(struct au8522_state *state, u16 reg)

{

	int ret;

	u8 b0[] = { (reg >> 8) | 0x40, reg & 0xff };

	u8 b1[] = { 0 };



	struct i2c_msg msg[] = {

		{ .addr = state->config->demod_address, .flags = 0,

		  .buf = b0, .len = 2 },

		{ .addr = state->config->demod_address, .flags = I2C_M_RD,

		  .buf = b1, .len = 1 } };



	ret = i2c_transfer(state->i2c, msg, 2);



	if (ret != 2)

		printk(KERN_ERR "%s: readreg error (ret == %i)\n",

		       __func__, ret);

	return b1[0];

}

EXPORT_SYMBOL(au8522_readreg);



int au8522_i2c_gate_ctrl(struct dvb_frontend *fe, int enable)

{

	struct au8522_state *state = fe->demodulator_priv;



	dprintk("%s(%d)\n", __func__, enable);



	if (state->operational_mode == AU8522_ANALOG_MODE) {

		/* We're being asked to manage the gate even though we're

		   not in digital mode.  This can occur if we get switched

		   over to analog mode before the dvb_frontend kernel thread

		   has completely shutdown */

		return 0;

	}



	if (enable)

		return au8522_writereg(state, 0x106, 1);

	else

		return au8522_writereg(state, 0x106, 0);

}

EXPORT_SYMBOL(au8522_i2c_gate_ctrl);



/* Reset the demod hardware and reset all of the configuration registers

   to a default state. */

int au8522_get_state(struct au8522_state **state, struct i2c_adapter *i2c,

		     u8 client_address)

{

	int ret;



	mutex_lock(&au8522_list_mutex);

	ret = hybrid_tuner_request_state(struct au8522_state, (*state),

					 hybrid_tuner_instance_list,

					 i2c, client_address, "au8522");

	mutex_unlock(&au8522_list_mutex);



	return ret;

}

EXPORT_SYMBOL(au8522_get_state);



void au8522_release_state(struct au8522_state *state)

{

	mutex_lock(&au8522_list_mutex);

	if (state != NULL)

		hybrid_tuner_release_state(state);

	mutex_unlock(&au8522_list_mutex);

}

EXPORT_SYMBOL(au8522_release_state);



int au8522_led_gpio_enable(struct au8522_state *state, int onoff)

{

	struct au8522_led_config *led_config = state->config->led_cfg;

	u8 val;



	/* bail out if we can't control an LED */

	if (!led_config || !led_config->gpio_output ||

	    !led_config->gpio_output_enable || !led_config->gpio_output_disable)

		return 0;



	val = au8522_readreg(state, 0x4000 |

			     (led_config->gpio_output & ~0xc000));

	if (onoff) {

		/* enable GPIO output */

		val &= ~((led_config->gpio_output_enable >> 8) & 0xff);

		val |=  (led_config->gpio_output_enable & 0xff);

	} else {

		/* disable GPIO output */

		val &= ~((led_config->gpio_output_disable >> 8) & 0xff);

		val |=  (led_config->gpio_output_disable & 0xff);

	}

	return au8522_writereg(state, 0x8000 |

			       (led_config->gpio_output & ~0xc000), val);

}

EXPORT_SYMBOL(au8522_led_gpio_enable);



/* led = 0 | off

 * led = 1 | signal ok

 * led = 2 | signal strong

 * led < 0 | only light led if leds are currently off

 */

int au8522_led_ctrl(struct au8522_state *state, int led)

{

	struct au8522_led_config *led_config = state->config->led_cfg;

	int i, ret = 0;



	/* bail out if we can't control an LED */

	if (!led_config || !led_config->gpio_leds ||

	    !led_config->num_led_states || !led_config->led_states)

		return 0;



	if (led < 0) {

		/* if LED is already lit, then leave it as-is */

		if (state->led_state)

			return 0;

		else

			led *= -1;

	}



	/* toggle LED if changing state */

	if (state->led_state != led) {

		u8 val;



		dprintk("%s: %d\n", __func__, led);



		au8522_led_gpio_enable(state, 1);



		val = au8522_readreg(state, 0x4000 |

				     (led_config->gpio_leds & ~0xc000));



		/* start with all leds off */

		for (i = 0; i < led_config->num_led_states; i++)

			val &= ~led_config->led_states[i];



		/* set selected LED state */

		if (led < led_config->num_led_states)

			val |= led_config->led_states[led];

		else if (led_config->num_led_states)

			val |=

			led_config->led_states[led_config->num_led_states - 1];



		ret = au8522_writereg(state, 0x8000 |

				      (led_config->gpio_leds & ~0xc000), val);

		if (ret < 0)

			return ret;



		state->led_state = led;



		if (led == 0)

			au8522_led_gpio_enable(state, 0);

	}



	return 0;

}

EXPORT_SYMBOL(au8522_led_ctrl);



int au8522_init(struct dvb_frontend *fe)

{

	struct au8522_state *state = fe->demodulator_priv;

	dprintk("%s()\n", __func__);



	state->operational_mode = AU8522_DIGITAL_MODE;



	/* Clear out any state associated with the digital side of the

	   chip, so that when it gets powered back up it won't think

	   that it is already tuned */

	state->current_frequency = 0;



	au8522_writereg(state, 0xa4, 1 << 5);



	au8522_i2c_gate_ctrl(fe, 1);



	return 0;

}

EXPORT_SYMBOL(au8522_init);



int au8522_sleep(struct dvb_frontend *fe)

{

	struct au8522_state *state = fe->demodulator_priv;

	dprintk("%s()\n", __func__);



	/* Only power down if the digital side is currently using the chip */

	if (state->operational_mode == AU8522_ANALOG_MODE) {

		/* We're not in one of the expected power modes, which means

		   that the DVB thread is probably telling us to go to sleep

		   even though the analog frontend has already started using

		   the chip.  So ignore the request */

		return 0;

	}



	/* turn off led */

	au8522_led_ctrl(state, 0);



	/* Power down the chip */

	au8522_writereg(state, 0xa4, 1 << 5);



	state->current_frequency = 0;



	return 0;

}

EXPORT_SYMBOL(au8522_sleep);

drivers/media/dvb/frontends/au8522_dig.c

+0 −215
Original line number Diff line number Diff line
@@ -30,74 +30,11 @@ 


static int debug;



/* Despite the name "hybrid_tuner", the framework works just as well for

   hybrid demodulators as well... */

static LIST_HEAD(hybrid_tuner_instance_list);

static DEFINE_MUTEX(au8522_list_mutex);



#define dprintk(arg...)\

	do { if (debug)\

		printk(arg);\

	} while (0)



/* 16 bit registers, 8 bit values */

int au8522_writereg(struct au8522_state *state, u16 reg, u8 data)

{

	int ret;

	u8 buf[] = { (reg >> 8) | 0x80, reg & 0xff, data };



	struct i2c_msg msg = { .addr = state->config->demod_address,

			       .flags = 0, .buf = buf, .len = 3 };



	ret = i2c_transfer(state->i2c, &msg, 1);



	if (ret != 1)

		printk("%s: writereg error (reg == 0x%02x, val == 0x%04x, "

		       "ret == %i)\n", __func__, reg, data, ret);



	return (ret != 1) ? -1 : 0;

}



u8 au8522_readreg(struct au8522_state *state, u16 reg)

{

	int ret;

	u8 b0[] = { (reg >> 8) | 0x40, reg & 0xff };

	u8 b1[] = { 0 };



	struct i2c_msg msg[] = {

		{ .addr = state->config->demod_address, .flags = 0,

		  .buf = b0, .len = 2 },

		{ .addr = state->config->demod_address, .flags = I2C_M_RD,

		  .buf = b1, .len = 1 } };



	ret = i2c_transfer(state->i2c, msg, 2);



	if (ret != 2)

		printk(KERN_ERR "%s: readreg error (ret == %i)\n",

		       __func__, ret);

	return b1[0];

}



static int au8522_i2c_gate_ctrl(struct dvb_frontend *fe, int enable)

{

	struct au8522_state *state = fe->demodulator_priv;



	dprintk("%s(%d)\n", __func__, enable);



	if (state->operational_mode == AU8522_ANALOG_MODE) {

		/* We're being asked to manage the gate even though we're

		   not in digital mode.  This can occur if we get switched

		   over to analog mode before the dvb_frontend kernel thread

		   has completely shutdown */

		return 0;

	}



	if (enable)

		return au8522_writereg(state, 0x106, 1);

	else

		return au8522_writereg(state, 0x106, 0);

}



struct mse2snr_tab {

	u16 val;

	u16 data;
@@ -609,136 +546,6 @@ static int au8522_set_frontend(struct dvb_frontend *fe) 
	return 0;

}



/* Reset the demod hardware and reset all of the configuration registers

   to a default state. */

int au8522_init(struct dvb_frontend *fe)

{

	struct au8522_state *state = fe->demodulator_priv;

	dprintk("%s()\n", __func__);



	state->operational_mode = AU8522_DIGITAL_MODE;



	/* Clear out any state associated with the digital side of the

	   chip, so that when it gets powered back up it won't think

	   that it is already tuned */

	state->current_frequency = 0;



	au8522_writereg(state, 0xa4, 1 << 5);



	au8522_i2c_gate_ctrl(fe, 1);



	return 0;

}



static int au8522_led_gpio_enable(struct au8522_state *state, int onoff)

{

	struct au8522_led_config *led_config = state->config->led_cfg;

	u8 val;



	/* bail out if we can't control an LED */

	if (!led_config || !led_config->gpio_output ||

	    !led_config->gpio_output_enable || !led_config->gpio_output_disable)

		return 0;



	val = au8522_readreg(state, 0x4000 |

			     (led_config->gpio_output & ~0xc000));

	if (onoff) {

		/* enable GPIO output */

		val &= ~((led_config->gpio_output_enable >> 8) & 0xff);

		val |=  (led_config->gpio_output_enable & 0xff);

	} else {

		/* disable GPIO output */

		val &= ~((led_config->gpio_output_disable >> 8) & 0xff);

		val |=  (led_config->gpio_output_disable & 0xff);

	}

	return au8522_writereg(state, 0x8000 |

			       (led_config->gpio_output & ~0xc000), val);

}



/* led = 0 | off

 * led = 1 | signal ok

 * led = 2 | signal strong

 * led < 0 | only light led if leds are currently off

 */

static int au8522_led_ctrl(struct au8522_state *state, int led)

{

	struct au8522_led_config *led_config = state->config->led_cfg;

	int i, ret = 0;



	/* bail out if we can't control an LED */

	if (!led_config || !led_config->gpio_leds ||

	    !led_config->num_led_states || !led_config->led_states)

		return 0;



	if (led < 0) {

		/* if LED is already lit, then leave it as-is */

		if (state->led_state)

			return 0;

		else

			led *= -1;

	}



	/* toggle LED if changing state */

	if (state->led_state != led) {

		u8 val;



		dprintk("%s: %d\n", __func__, led);



		au8522_led_gpio_enable(state, 1);



		val = au8522_readreg(state, 0x4000 |

				     (led_config->gpio_leds & ~0xc000));



		/* start with all leds off */

		for (i = 0; i < led_config->num_led_states; i++)

			val &= ~led_config->led_states[i];



		/* set selected LED state */

		if (led < led_config->num_led_states)

			val |= led_config->led_states[led];

		else if (led_config->num_led_states)

			val |=

			led_config->led_states[led_config->num_led_states - 1];



		ret = au8522_writereg(state, 0x8000 |

				      (led_config->gpio_leds & ~0xc000), val);

		if (ret < 0)

			return ret;



		state->led_state = led;



		if (led == 0)

			au8522_led_gpio_enable(state, 0);

	}



	return 0;

}



int au8522_sleep(struct dvb_frontend *fe)

{

	struct au8522_state *state = fe->demodulator_priv;

	dprintk("%s()\n", __func__);



	/* Only power down if the digital side is currently using the chip */

	if (state->operational_mode == AU8522_ANALOG_MODE) {

		/* We're not in one of the expected power modes, which means

		   that the DVB thread is probably telling us to go to sleep

		   even though the analog frontend has already started using

		   the chip.  So ignore the request */

		return 0;

	}



	/* turn off led */

	au8522_led_ctrl(state, 0);



	/* Power down the chip */

	au8522_writereg(state, 0xa4, 1 << 5);



	state->current_frequency = 0;



	return 0;

}



static int au8522_read_status(struct dvb_frontend *fe, fe_status_t *status)

{

	struct au8522_state *state = fe->demodulator_priv;
@@ -931,28 +738,6 @@ static int au8522_get_tune_settings(struct dvb_frontend *fe, 


static struct dvb_frontend_ops au8522_ops;



int au8522_get_state(struct au8522_state **state, struct i2c_adapter *i2c,

		     u8 client_address)

{

	int ret;



	mutex_lock(&au8522_list_mutex);

	ret = hybrid_tuner_request_state(struct au8522_state, (*state),

					 hybrid_tuner_instance_list,

					 i2c, client_address, "au8522");

	mutex_unlock(&au8522_list_mutex);



	return ret;

}



void au8522_release_state(struct au8522_state *state)

{

	mutex_lock(&au8522_list_mutex);

	if (state != NULL)

		hybrid_tuner_release_state(state);

	mutex_unlock(&au8522_list_mutex);

}





static void au8522_release(struct dvb_frontend *fe)

{

drivers/media/dvb/frontends/au8522_priv.h

+2 −0
Original line number Diff line number Diff line
@@ -81,6 +81,8 @@ int au8522_sleep(struct dvb_frontend *fe); 
int au8522_get_state(struct au8522_state **state, struct i2c_adapter *i2c,

		     u8 client_address);

void au8522_release_state(struct au8522_state *state);

int au8522_i2c_gate_ctrl(struct dvb_frontend *fe, int enable);

int au8522_led_ctrl(struct au8522_state *state, int led);



/* REGISTERS */

#define AU8522_INPUT_CONTROL_REG081H			0x081

CRA Git | Maintained and supported by SUSTech CRA and CCSE