Commit b21af975 authored by Olof Johansson's avatar Olof Johansson
Browse files

Merge tag 'v4.13-rockchip-dts64-1' of... 

Merge tag 'v4.13-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt64

Support for the new rk3399 firefly board; extending the pcie ranges to
make usage of pci switches possible; some more qos and pinctrl nodes on
rk3399; updates for the rk3399 cpu operating points including separate
opps for the higher rates OP1 variant of the chip and mmc-nodes for
the rk3328.

* tag 'v4.13-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip

:
  arm64: dts: rockchip: update common rk3399 operating points
  arm64: dts: rockchip: introduce rk3399-op1 operating points
  arm64: dts: rockchip: enable usb3 controllers on rk3399-firefly
  arm64: dts: rockchip: add ethernet0 alias on rk3399
  arm64: dts: rockchip: bring rk3399-firefly power-tree in line
  arm64: dts: rockchip: add sdmmc/sdio/emmc nodes for RK3328 SoCs
  arm64: dts: rockchip: extent IORESOURCE_MEM_64 of PCIe for rk3399
  arm64: dts: rockchip: extent bus-ranges of PCIe for rk3399
  arm64: dts: rockchip: add pinctrl settings for some rk3399 peripherals
  arm64: dts: rockchip: add some missing qos nodes on rk3399
  arm64: dts: rockchip: add support for firefly-rk3399 board
  dt-bindings: add firefly-rk3399 board support

Signed-off-by: default avatarOlof Johansson <olof@lixom.net>
parents 704ffd74 5fd3ffb9

Documentation/devicetree/bindings/arm/rockchip.txt

+4 −0
Original line number Diff line number Diff line
@@ -42,6 +42,10 @@ Rockchip platforms device tree bindings 
    Required root node properties:

      - compatible = "firefly,firefly-rk3288-reload", "rockchip,rk3288";



- Firefly Firefly-RK3399 board:

    Required root node properties:

      - compatible = "firefly,firefly-rk3399", "rockchip,rk3399";



- ChipSPARK PopMetal-RK3288 board:

    Required root node properties:

      - compatible = "chipspark,popmetal-rk3288", "rockchip,rk3288";

arch/arm64/boot/dts/rockchip/Makefile

+1 −0
Original line number Diff line number Diff line
@@ -5,6 +5,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-orion-r68-meta.dtb 
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-px5-evb.dtb

dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-r88.dtb

dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-evb.dtb

dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-firefly.dtb

dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-kevin.dtb



always		:= $(dtb-y)

arch/arm64/boot/dts/rockchip/rk3328.dtsi

+33 −0
Original line number Diff line number Diff line
@@ -372,6 +372,39 @@ 
			<32768>;

	};



	sdmmc: dwmmc@ff500000 {

		compatible = "rockchip,rk3328-dw-mshc", "rockchip,rk3288-dw-mshc";

		reg = <0x0 0xff500000 0x0 0x4000>;

		interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;

		clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,

			 <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;

		clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";

		fifo-depth = <0x100>;

		status = "disabled";

	};



	sdio: dwmmc@ff510000 {

		compatible = "rockchip,rk3328-dw-mshc", "rockchip,rk3288-dw-mshc";

		reg = <0x0 0xff510000 0x0 0x4000>;

		interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;

		clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,

			 <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;

		clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";

		fifo-depth = <0x100>;

		status = "disabled";

	};



	emmc: dwmmc@ff520000 {

		compatible = "rockchip,rk3328-dw-mshc", "rockchip,rk3288-dw-mshc";

		reg = <0x0 0xff520000 0x0 0x4000>;

		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;

		clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,

			 <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;

		clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";

		fifo-depth = <0x100>;

		status = "disabled";

	};



	gmac2io: ethernet@ff540000 {

		compatible = "rockchip,rk3328-gmac";

		reg = <0x0 0xff540000 0x0 0x10000>;

arch/arm64/boot/dts/rockchip/rk3399-firefly.dts

0 → 100644
+718 −0
Original line number Diff line number Diff line 
/*

 * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.

 *

 * This file is dual-licensed: you can use it either under the terms

 * of the GPL or the X11 license, at your option. Note that this dual

 * licensing only applies to this file, and not this project as a

 * whole.

 *

 *  a) This file is free software; you can redistribute it and/or

 *     modify it under the terms of the GNU General Public License as

 *     published by the Free Software Foundation; either version 2 of the

 *     License, or (at your option) any later version.

 *

 *     This file is distributed in the hope that it will be useful,

 *     but WITHOUT ANY WARRANTY; without even the implied warranty of

 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 *     GNU General Public License for more details.

 *

 * Or, alternatively,

 *

 *  b) Permission is hereby granted, free of charge, to any person

 *     obtaining a copy of this software and associated documentation

 *     files (the "Software"), to deal in the Software without

 *     restriction, including without limitation the rights to use,

 *     copy, modify, merge, publish, distribute, sublicense, and/or

 *     sell copies of the Software, and to permit persons to whom the

 *     Software is furnished to do so, subject to the following

 *     conditions:

 *

 *     The above copyright notice and this permission notice shall be

 *     included in all copies or substantial portions of the Software.

 *

 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,

 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES

 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND

 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT

 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,

 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING

 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR

 *     OTHER DEALINGS IN THE SOFTWARE.

 */



/dts-v1/;

#include <dt-bindings/pwm/pwm.h>

#include "rk3399.dtsi"



/ {

	model = "Firefly-RK3399 Board";

	compatible = "firefly,firefly-rk3399", "rockchip,rk3399";



	backlight: backlight {

		compatible = "pwm-backlight";

		enable-gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>;

		pwms = <&pwm0 0 25000 0>;

		brightness-levels = <

			  0   1   2   3   4   5   6   7

			  8   9  10  11  12  13  14  15

			 16  17  18  19  20  21  22  23

			 24  25  26  27  28  29  30  31

			 32  33  34  35  36  37  38  39

			 40  41  42  43  44  45  46  47

			 48  49  50  51  52  53  54  55

			 56  57  58  59  60  61  62  63

			 64  65  66  67  68  69  70  71

			 72  73  74  75  76  77  78  79

			 80  81  82  83  84  85  86  87

			 88  89  90  91  92  93  94  95

			 96  97  98  99 100 101 102 103

			104 105 106 107 108 109 110 111

			112 113 114 115 116 117 118 119

			120 121 122 123 124 125 126 127

			128 129 130 131 132 133 134 135

			136 137 138 139 140 141 142 143

			144 145 146 147 148 149 150 151

			152 153 154 155 156 157 158 159

			160 161 162 163 164 165 166 167

			168 169 170 171 172 173 174 175

			176 177 178 179 180 181 182 183

			184 185 186 187 188 189 190 191

			192 193 194 195 196 197 198 199

			200 201 202 203 204 205 206 207

			208 209 210 211 212 213 214 215

			216 217 218 219 220 221 222 223

			224 225 226 227 228 229 230 231

			232 233 234 235 236 237 238 239

			240 241 242 243 244 245 246 247

			248 249 250 251 252 253 254 255>;

		default-brightness-level = <200>;

	};



	clkin_gmac: external-gmac-clock {

		compatible = "fixed-clock";

		clock-frequency = <125000000>;

		clock-output-names = "clkin_gmac";

		#clock-cells = <0>;

	};



	dc_12v: dc-12v {

		compatible = "regulator-fixed";

		regulator-name = "dc_12v";

		regulator-always-on;

		regulator-boot-on;

		regulator-min-microvolt = <12000000>;

		regulator-max-microvolt = <12000000>;

	};



	rt5640-sound {

		compatible = "simple-audio-card";

		simple-audio-card,name = "rockchip,rt5640-codec";

		simple-audio-card,format = "i2s";

		simple-audio-card,mclk-fs = <256>;

		simple-audio-card,widgets =

			"Microphone", "Mic Jack",

			"Headphone", "Headphone Jack";

		simple-audio-card,routing =

			"Mic Jack", "MICBIAS1",

			"IN1P", "Mic Jack",

			"Headphone Jack", "HPOL",

			"Headphone Jack", "HPOR";



		simple-audio-card,cpu {

			sound-dai = <&i2s1>;

		};



		simple-audio-card,codec {

			sound-dai = <&rt5640>;

		};

	};



	sdio_pwrseq: sdio-pwrseq {

		compatible = "mmc-pwrseq-simple";

		clocks = <&rk808 1>;

		clock-names = "ext_clock";

		pinctrl-names = "default";

		pinctrl-0 = <&wifi_enable_h>;



		/*

		 * On the module itself this is one of these (depending

		 * on the actual card populated):

		 * - SDIO_RESET_L_WL_REG_ON

		 * - PDN (power down when low)

		 */

		reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;

	};



	/* switched by pmic_sleep */

	vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {

		compatible = "regulator-fixed";

		regulator-name = "vcc1v8_s3";

		regulator-always-on;

		regulator-boot-on;

		regulator-min-microvolt = <1800000>;

		regulator-max-microvolt = <1800000>;

		vin-supply = <&vcc_1v8>;

	};



	vcc3v3_pcie: vcc3v3-pcie-regulator {

		compatible = "regulator-fixed";

		enable-active-high;

		gpio = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>;

		pinctrl-names = "default";

		pinctrl-0 = <&pcie_pwr_en>;

		regulator-name = "vcc3v3_pcie";

		regulator-always-on;

		regulator-boot-on;

		vin-supply = <&dc_12v>;

	};



	vcc3v3_sys: vcc3v3-sys {

		compatible = "regulator-fixed";

		regulator-name = "vcc3v3_sys";

		regulator-always-on;

		regulator-boot-on;

		regulator-min-microvolt = <3300000>;

		regulator-max-microvolt = <3300000>;

		vin-supply = <&vcc_sys>;

	};



	/* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */

	vcc5v0_host: vcc5v0-host-regulator {

		compatible = "regulator-fixed";

		enable-active-high;

		gpio = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;

		pinctrl-names = "default";

		pinctrl-0 = <&vcc5v0_host_en>;

		regulator-name = "vcc5v0_host";

		regulator-always-on;

		vin-supply = <&vcc_sys>;

	};



	vcc_sys: vcc-sys {

		compatible = "regulator-fixed";

		regulator-name = "vcc_sys";

		regulator-always-on;

		regulator-boot-on;

		regulator-min-microvolt = <5000000>;

		regulator-max-microvolt = <5000000>;

		vin-supply = <&dc_12v>;

	};



	vdd_log: vdd-log {

		compatible = "pwm-regulator";

		pwms = <&pwm2 0 25000 1>;

		regulator-name = "vdd_log";

		regulator-always-on;

		regulator-boot-on;

		regulator-min-microvolt = <800000>;

		regulator-max-microvolt = <1400000>;

		vin-supply = <&vcc_sys>;

	};

};



&cpu_l0 {

	cpu-supply = <&vdd_cpu_l>;

};



&cpu_l1 {

	cpu-supply = <&vdd_cpu_l>;

};



&cpu_l2 {

	cpu-supply = <&vdd_cpu_l>;

};



&cpu_l3 {

	cpu-supply = <&vdd_cpu_l>;

};



&cpu_b0 {

	cpu-supply = <&vdd_cpu_b>;

};



&cpu_b1 {

	cpu-supply = <&vdd_cpu_b>;

};



&emmc_phy {

	status = "okay";

};



&gmac {

	assigned-clocks = <&cru SCLK_RMII_SRC>;

	assigned-clock-parents = <&clkin_gmac>;

	clock_in_out = "input";

	phy-supply = <&vcc_lan>;

	phy-mode = "rgmii";

	pinctrl-names = "default";

	pinctrl-0 = <&rgmii_pins>;

	snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;

	snps,reset-active-low;

	snps,reset-delays-us = <0 10000 50000>;

	tx_delay = <0x28>;

	rx_delay = <0x11>;

	status = "okay";

};



&i2c0 {

	clock-frequency = <400000>;

	i2c-scl-rising-time-ns = <168>;

	i2c-scl-falling-time-ns = <4>;

	status = "okay";



	rk808: pmic@1b {

		compatible = "rockchip,rk808";

		reg = <0x1b>;

		interrupt-parent = <&gpio1>;

		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;

		#clock-cells = <1>;

		clock-output-names = "xin32k", "rk808-clkout2";

		pinctrl-names = "default";

		pinctrl-0 = <&pmic_int_l>;

		rockchip,system-power-controller;

		wakeup-source;



		vcc1-supply = <&vcc_sys>;

		vcc2-supply = <&vcc_sys>;

		vcc3-supply = <&vcc_sys>;

		vcc4-supply = <&vcc_sys>;

		vcc6-supply = <&vcc_sys>;

		vcc7-supply = <&vcc_sys>;

		vcc8-supply = <&vcc3v3_sys>;

		vcc9-supply = <&vcc_sys>;

		vcc10-supply = <&vcc_sys>;

		vcc11-supply = <&vcc_sys>;

		vcc12-supply = <&vcc3v3_sys>;

		vddio-supply = <&vcc1v8_pmu>;



		regulators {

			vdd_center: DCDC_REG1 {

				regulator-name = "vdd_center";

				regulator-always-on;

				regulator-boot-on;

				regulator-min-microvolt = <750000>;

				regulator-max-microvolt = <1350000>;

				regulator-ramp-delay = <6001>;

				regulator-state-mem {

					regulator-off-in-suspend;

				};

			};



			vdd_cpu_l: DCDC_REG2 {

				regulator-name = "vdd_cpu_l";

				regulator-always-on;

				regulator-boot-on;

				regulator-min-microvolt = <750000>;

				regulator-max-microvolt = <1350000>;

				regulator-ramp-delay = <6001>;

				regulator-state-mem {

					regulator-off-in-suspend;

				};

			};



			vcc_ddr: DCDC_REG3 {

				regulator-name = "vcc_ddr";

				regulator-always-on;

				regulator-boot-on;

				regulator-state-mem {

					regulator-on-in-suspend;

				};

			};



			vcc_1v8: DCDC_REG4 {

				regulator-name = "vcc_1v8";

				regulator-always-on;

				regulator-boot-on;

				regulator-min-microvolt = <1800000>;

				regulator-max-microvolt = <1800000>;

				regulator-state-mem {

					regulator-on-in-suspend;

					regulator-suspend-microvolt = <1800000>;

				};

			};



			vcc1v8_dvp: LDO_REG1 {

				regulator-name = "vcc1v8_dvp";

				regulator-always-on;

				regulator-boot-on;

				regulator-min-microvolt = <1800000>;

				regulator-max-microvolt = <1800000>;

				regulator-state-mem {

					regulator-off-in-suspend;

				};

			};



			vcc2v8_dvp: LDO_REG2 {

				regulator-name = "vcc2v8_dvp";

				regulator-always-on;

				regulator-boot-on;

				regulator-min-microvolt = <2800000>;

				regulator-max-microvolt = <2800000>;

				regulator-state-mem {

					regulator-off-in-suspend;

				};

			};



			vcc1v8_pmu: LDO_REG3 {

				regulator-name = "vcc1v8_pmu";

				regulator-always-on;

				regulator-boot-on;

				regulator-min-microvolt = <1800000>;

				regulator-max-microvolt = <1800000>;

				regulator-state-mem {

					regulator-on-in-suspend;

					regulator-suspend-microvolt = <1800000>;

				};

			};



			vcc_sdio: LDO_REG4 {

				regulator-name = "vcc_sdio";

				regulator-always-on;

				regulator-boot-on;

				regulator-min-microvolt = <1800000>;

				regulator-max-microvolt = <3300000>;

				regulator-state-mem {

					regulator-on-in-suspend;

					regulator-suspend-microvolt = <3300000>;

				};

			};



			vcca3v0_codec: LDO_REG5 {

				regulator-name = "vcca3v0_codec";

				regulator-always-on;

				regulator-boot-on;

				regulator-min-microvolt = <3000000>;

				regulator-max-microvolt = <3000000>;

				regulator-state-mem {

					regulator-off-in-suspend;

				};

			};



			vcc_1v5: LDO_REG6 {

				regulator-name = "vcc_1v5";

				regulator-always-on;

				regulator-boot-on;

				regulator-min-microvolt = <1500000>;

				regulator-max-microvolt = <1500000>;

				regulator-state-mem {

					regulator-on-in-suspend;

					regulator-suspend-microvolt = <1500000>;

				};

			};



			vcca1v8_codec: LDO_REG7 {

				regulator-name = "vcca1v8_codec";

				regulator-always-on;

				regulator-boot-on;

				regulator-min-microvolt = <1800000>;

				regulator-max-microvolt = <1800000>;

				regulator-state-mem {

					regulator-off-in-suspend;

				};

			};



			vcc_3v0: LDO_REG8 {

				regulator-name = "vcc_3v0";

				regulator-always-on;

				regulator-boot-on;

				regulator-min-microvolt = <3000000>;

				regulator-max-microvolt = <3000000>;

				regulator-state-mem {

					regulator-on-in-suspend;

					regulator-suspend-microvolt = <3000000>;

				};

			};



			vcc3v3_s3: vcc_lan: SWITCH_REG1 {

				regulator-name = "vcc3v3_s3";

				regulator-always-on;

				regulator-boot-on;

				regulator-state-mem {

					regulator-off-in-suspend;

				};

			};



			vcc3v3_s0: SWITCH_REG2 {

				regulator-name = "vcc3v3_s0";

				regulator-always-on;

				regulator-boot-on;

				regulator-state-mem {

					regulator-off-in-suspend;

				};

			};

		};

	};



	vdd_cpu_b: regulator@40 {

		compatible = "silergy,syr827";

		reg = <0x40>;

		fcs,suspend-voltage-selector = <0>;

		regulator-name = "vdd_cpu_b";

		regulator-min-microvolt = <712500>;

		regulator-max-microvolt = <1500000>;

		regulator-ramp-delay = <1000>;

		regulator-always-on;

		regulator-boot-on;

		vin-supply = <&vcc_sys>;



		regulator-state-mem {

			regulator-off-in-suspend;

		};

	};



	vdd_gpu: regulator@41 {

		compatible = "silergy,syr828";

		reg = <0x41>;

		fcs,suspend-voltage-selector = <1>;

		regulator-name = "vdd_gpu";

		regulator-min-microvolt = <712500>;

		regulator-max-microvolt = <1500000>;

		regulator-ramp-delay = <1000>;

		regulator-always-on;

		regulator-boot-on;

		vin-supply = <&vcc_sys>;



		regulator-state-mem {

			regulator-off-in-suspend;

		};

	};

};



&i2c1 {

	i2c-scl-rising-time-ns = <300>;

	i2c-scl-falling-time-ns = <15>;

	status = "okay";



	rt5640: rt5640@1c {

		compatible = "realtek,rt5640";

		reg = <0x1c>;

		clocks = <&cru SCLK_I2S_8CH_OUT>;

		clock-names = "mclk";

		realtek,in1-differential;

		#sound-dai-cells = <0>;

		pinctrl-names = "default";

		pinctrl-0 = <&rt5640_hpcon>;

	};

};



&i2c3 {

	i2c-scl-rising-time-ns = <450>;

	i2c-scl-falling-time-ns = <15>;

	status = "okay";

};



&i2c4 {

	i2c-scl-rising-time-ns = <600>;

	i2c-scl-falling-time-ns = <20>;

	status = "okay";



	accelerometer@68 {

		compatible = "invensense,mpu6500";

		reg = <0x68>;

		interrupt-parent = <&gpio1>;

		interrupts = <RK_PC6 IRQ_TYPE_EDGE_RISING>;

	};

};



&i2s0 {

	rockchip,playback-channels = <8>;

	rockchip,capture-channels = <8>;

	#sound-dai-cells = <0>;

	status = "okay";

};



&i2s1 {

	rockchip,playback-channels = <2>;

	rockchip,capture-channels = <2>;

	#sound-dai-cells = <0>;

	status = "okay";

};



&i2s2 {

	#sound-dai-cells = <0>;

	status = "okay";

};



&io_domains {

	status = "okay";



	bt656-supply = <&vcc1v8_dvp>;

	audio-supply = <&vcca1v8_codec>;

	sdmmc-supply = <&vcc_sdio>;

	gpio1830-supply = <&vcc_3v0>;

};



&pcie_phy {

	status = "okay";

};



&pcie0 {

	ep-gpios = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>;

	num-lanes = <4>;

	pinctrl-names = "default";

	pinctrl-0 = <&pcie_clkreqn>;

	status = "okay";

};



&pmu_io_domains {

	pmu1830-supply = <&vcc_3v0>;

	status = "okay";

};



&pinctrl {

	buttons {

		pwrbtn: pwrbtn {

			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;

		};

	};



	lcd-panel {

		lcd_panel_reset: lcd-panel-reset {

			rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>;

		};

	};



	pcie {

		pcie_pwr_en: pcie-pwr-en {

			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;

		};



		pcie_3g_drv: pcie-3g-drv {

			rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;

		};

	};



	pmic {

		vsel1_gpio: vsel1-gpio {

			rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;

		};



		vsel2_gpio: vsel2-gpio {

			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;

		};

	};



	sdio-pwrseq {

		wifi_enable_h: wifi-enable-h {

			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;

		};

	};



	rt5640 {

		rt5640_hpcon: rt5640-hpcon {

			rockchip,pins = <4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;

		};

	};



	pmic {

		pmic_int_l: pmic-int-l {

			rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;

		};

	};



	usb2 {

		vcc5v0_host_en: vcc5v0-host-en {

			rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;

		};

	};

};



&pwm0 {

	status = "okay";

};



&pwm2 {

	status = "okay";

};



&saradc {

	vref-supply = <&vcca1v8_s3>;

	status = "okay";

};



&sdhci {

	bus-width = <8>;

	keep-power-in-suspend;

	mmc-hs400-1_8v;

	mmc-hs400-enhanced-strobe;

	non-removable;

	status = "okay";

};



&tsadc {

	/* tshut mode 0:CRU 1:GPIO */

	rockchip,hw-tshut-mode = <1>;

	/* tshut polarity 0:LOW 1:HIGH */

	rockchip,hw-tshut-polarity = <1>;

	status = "okay";

};



&u2phy0 {

	status = "okay";



	u2phy0_otg: otg-port {

		status = "okay";

	};



	u2phy0_host: host-port {

		phy-supply = <&vcc5v0_host>;

		status = "okay";

	};

};



&u2phy1 {

	status = "okay";



	u2phy1_otg: otg-port {

		status = "okay";

	};



	u2phy1_host: host-port {

		phy-supply = <&vcc5v0_host>;

		status = "okay";

	};

};



&uart0 {

	pinctrl-names = "default";

	pinctrl-0 = <&uart0_xfer &uart0_cts>;

	status = "okay";

};



&uart2 {

	status = "okay";

};



&usb_host0_ehci {

	status = "okay";

};



&usb_host0_ohci {

	status = "okay";

};



&usb_host1_ehci {

	status = "okay";

};



&usb_host1_ohci {

	status = "okay";

};



&usbdrd3_0 {

	status = "okay";

};



&usbdrd_dwc3_0 {

	status = "okay";

	dr_mode = "otg";

};



&usbdrd3_1 {

	status = "okay";

};



&usbdrd_dwc3_1 {

	status = "okay";

	dr_mode = "host";

};

arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi

+1 −1
Original line number Diff line number Diff line
@@ -44,7 +44,7 @@ 


#include <dt-bindings/input/input.h>

#include "rk3399.dtsi"

#include "rk3399-opp.dtsi"

#include "rk3399-op1-opp.dtsi"



/ {

	chosen {

CRA Git | Maintained and supported by SUSTech CRA and CCSE