Commit b1fa4dc4 authored by Christophe Ricard's avatar Christophe Ricard Committed by Samuel Ortiz
Browse files

NFC: st-nci: Add support for proprietary commands 



Add support for proprietary commands useful mainly for
factory testings. Here is a list:

- FACTORY_MODE: Allow to set the driver into a mode where
  no secure element are activated. It does not consider any
  NFC_ATTR_VENDOR_DATA.
- HCI_CLEAR_ALL_PIPES: Allow to execute a HCI clear all pipes
  command. It does not consider any NFC_ATTR_VENDOR_DATA.
- HCI_DM_PUT_DATA: Allow to configure specific CLF registry
  like for example RF trimmings or low level drivers
  configurations (I2C, SPI, SWP).
- HCI_DM_UPDATE_AID: Allow to configure an AID routing into the
  CLF routing table following RF technology, CLF mode or protocol.
- HCI_DM_GET_INFO: Allow to retrieve CLF information.
- HCI_DM_GET_DATA: Allow to retrieve CLF configurable data such as
  low level drivers configurations or RF trimmings.
- HCI_DM_DIRECT_LOAD: Allow to load a firmware into the CLF.
  A complete packet can be more than 8KB.
- HCI_DM_RESET: Allow to run a CLF reset in order to "commit" CLF
  configuration changes without CLF power off.
- HCI_GET_PARAM: Allow to retrieve an HCI CLF parameter (for example
  the white list).
- HCI_DM_FIELD_GENERATOR: Allow to generate different kind of RF
  technology. When using this command to anti-collision is done.
- HCI_LOOPBACK: Allow to echo a command and test the Dh to CLF
  connectivity.
- HCI_DM_VDC_MEASUREMENT_VALUE: Allow to measure the field applied
  on the CLF antenna. A value between 0 and 0x0f is returned. 0 is
  maximum.
- HCI_DM_FWUPD_START: Allow to put CLF into firmware update mode.
  It is a specific CLF command as there is no GPIO for this.
- HCI_DM_FWUPD_END:  Allow to complete firmware update.
- HCI_DM_VDC_VALUE_COMPARISON: Allow to compare the field applied
  on the CLF antenna to a reference value.
- MANUFACTURER_SPECIFIC: Allow to retrieve manufacturer specific data
  received during a NCI_CORE_INIT_CMD.

Signed-off-by: default avatarChristophe Ricard <christophe-h.ricard@st.com>
Signed-off-by: default avatarSamuel Ortiz <sameo@linux.intel.com>
parent ba723199

drivers/nfc/st-nci/Makefile

+1 −1
Original line number Diff line number Diff line
@@ -2,7 +2,7 @@ 
# Makefile for ST21NFCB NCI based NFC driver

#



st-nci-objs = ndlc.o core.o se.o

st-nci-objs = ndlc.o core.o se.o vendor_cmds.o

obj-$(CONFIG_NFC_ST_NCI)     += st-nci.o



st-nci_i2c-objs = i2c.o

drivers/nfc/st-nci/core.c

+11 −2
Original line number Diff line number Diff line
@@ -152,14 +152,23 @@ int st_nci_probe(struct llt_ndlc *ndlc, int phy_headroom, 


	nci_set_drvdata(ndlc->ndev, info);



	r = st_nci_vendor_cmds_init(ndlc->ndev);

	if (r) {

		pr_err("Cannot register proprietary vendor cmds\n");

		goto err_reg_dev;

	}



	r = nci_register_device(ndlc->ndev);

	if (r) {

		pr_err("Cannot register nfc device to nci core\n");

		nci_free_device(ndlc->ndev);

		return r;

		goto err_reg_dev;

	}



	return st_nci_se_init(ndlc->ndev);



err_reg_dev:

	nci_free_device(ndlc->ndev);

	return r;

}

EXPORT_SYMBOL_GPL(st_nci_probe);

drivers/nfc/st-nci/se.c

+22 −7
Original line number Diff line number Diff line
@@ -39,7 +39,6 @@ struct st_nci_pipe_info { 
#define ST_NCI_ESE_HOST_ID            0xc0



/* Gates */

#define ST_NCI_DEVICE_MGNT_GATE       0x01

#define ST_NCI_APDU_READER_GATE       0xf0

#define ST_NCI_CONNECTIVITY_GATE      0x41
@@ -114,6 +113,8 @@ static struct nci_hci_gate st_nci_gates[] = { 


	{NCI_HCI_IDENTITY_MGMT_GATE, NCI_HCI_INVALID_PIPE,

					ST_NCI_HOST_CONTROLLER_ID},

	{NCI_HCI_LOOPBACK_GATE, NCI_HCI_INVALID_PIPE,

					ST_NCI_HOST_CONTROLLER_ID},



	/* Secure element pipes are created by secure element host */

	{ST_NCI_CONNECTIVITY_GATE, NCI_HCI_DO_NOT_OPEN_PIPE,
@@ -376,8 +377,10 @@ void st_nci_hci_event_received(struct nci_dev *ndev, u8 pipe, 
		st_nci_hci_apdu_reader_event_received(ndev, event, skb);

	break;

	case ST_NCI_CONNECTIVITY_GATE:

		st_nci_hci_connectivity_event_received(ndev, host, event,

							 skb);

		st_nci_hci_connectivity_event_received(ndev, host, event, skb);

	break;

	case NCI_HCI_LOOPBACK_GATE:

		st_nci_hci_loopback_event_received(ndev, event, skb);

	break;

	}

}
@@ -509,6 +512,7 @@ EXPORT_SYMBOL_GPL(st_nci_enable_se); 


static int st_nci_hci_network_init(struct nci_dev *ndev)

{

	struct st_nci_info *info = nci_get_drvdata(ndev);

	struct core_conn_create_dest_spec_params *dest_params;

	struct dest_spec_params spec_params;

	struct nci_conn_info    *conn_info;
@@ -561,10 +565,17 @@ static int st_nci_hci_network_init(struct nci_dev *ndev) 
	if (r != NCI_HCI_ANY_OK)

		goto free_dest_params;



	/*

	 * In factory mode, we prevent secure elements activation

	 * by disabling nfcee on the current HCI connection id.

	 * HCI will be used here only for proprietary commands.

	 */

	if (test_bit(ST_NCI_FACTORY_MODE, &info->flags))

		r = nci_nfcee_mode_set(ndev, ndev->hci_dev->conn_info->id,

				       NCI_NFCEE_DISABLE);

	else

		r = nci_nfcee_mode_set(ndev, ndev->hci_dev->conn_info->id,

				       NCI_NFCEE_ENABLE);

	if (r != NCI_STATUS_OK)

		goto free_dest_params;



free_dest_params:

	kfree(dest_params);
@@ -578,6 +589,7 @@ int st_nci_discover_se(struct nci_dev *ndev) 
	u8 param[2];

	int r;

	int se_count = 0;

	struct st_nci_info *info = nci_get_drvdata(ndev);



	pr_debug("st_nci_discover_se\n");
@@ -585,6 +597,9 @@ int st_nci_discover_se(struct nci_dev *ndev) 
	if (r != 0)

		return r;



	if (test_bit(ST_NCI_FACTORY_MODE, &info->flags))

		return 0;



	param[0] = ST_NCI_UICC_HOST_ID;

	param[1] = ST_NCI_HCI_HOST_ID_ESE;

	r = nci_hci_set_param(ndev, NCI_HCI_ADMIN_GATE,

drivers/nfc/st-nci/st-nci.h

+68 −0
Original line number Diff line number Diff line
@@ -34,6 +34,11 @@ 
#define ST_NCI_ESE_MAX_LENGTH  33

#define ST_NCI_HCI_HOST_ID_ESE 0xc0



#define ST_NCI_DEVICE_MGNT_GATE		0x01



#define ST_NCI_VENDOR_OUI 0x0080E1 /* STMicroelectronics */

#define ST_NCI_FACTORY_MODE 2



struct nci_mode_set_cmd {

	u8 cmd_type;

	u8 mode;
@@ -60,10 +65,69 @@ struct st_nci_se_info { 
	void *cb_context;

};



/**

 * enum nfc_vendor_cmds - supported nfc vendor commands

 *

 * @FACTORY_MODE: Allow to set the driver into a mode where no secure element

 *	are activated. It does not consider any NFC_ATTR_VENDOR_DATA.

 * @HCI_CLEAR_ALL_PIPES: Allow to execute a HCI clear all pipes command.

 *	It does not consider any NFC_ATTR_VENDOR_DATA.

 * @HCI_DM_PUT_DATA: Allow to configure specific CLF registry as for example

 *	RF trimmings or low level drivers configurations (I2C, SPI, SWP).

 * @HCI_DM_UPDATE_AID: Allow to configure an AID routing into the CLF routing

 *	table following RF technology, CLF mode or protocol.

 * @HCI_DM_GET_INFO: Allow to retrieve CLF information.

 * @HCI_DM_GET_DATA: Allow to retrieve CLF configurable data such as low

 *	level drivers configurations or RF trimmings.

 * @HCI_DM_DIRECT_LOAD: Allow to load a firmware into the CLF. A complete

 *	packet can be more than 8KB.

 * @HCI_DM_RESET: Allow to run a CLF reset in order to "commit" CLF

 *	configuration changes without CLF power off.

 * @HCI_GET_PARAM: Allow to retrieve an HCI CLF parameter (for example the

 *	white list).

 * @HCI_DM_FIELD_GENERATOR: Allow to generate different kind of RF

 *	technology. When using this command to anti-collision is done.

 * @HCI_LOOPBACK: Allow to echo a command and test the Dh to CLF

 *	connectivity.

 * @HCI_DM_VDC_MEASUREMENT_VALUE: Allow to measure the field applied on the

 *	CLF antenna. A value between 0 and 0x0f is returned. 0 is maximum.

 * @HCI_DM_FWUPD_START: Allow to put CLF into firmware update mode. It is a

 *	specific CLF command as there is no GPIO for this.

 * @HCI_DM_FWUPD_END:  Allow to complete firmware update.

 * @HCI_DM_VDC_VALUE_COMPARISON: Allow to compare the field applied on the

 *	CLF antenna to a reference value.

 * @MANUFACTURER_SPECIFIC: Allow to retrieve manufacturer specific data

 *	received during a NCI_CORE_INIT_CMD.

 */

enum nfc_vendor_cmds {

	FACTORY_MODE,

	HCI_CLEAR_ALL_PIPES,

	HCI_DM_PUT_DATA,

	HCI_DM_UPDATE_AID,

	HCI_DM_GET_INFO,

	HCI_DM_GET_DATA,

	HCI_DM_DIRECT_LOAD,

	HCI_DM_RESET,

	HCI_GET_PARAM,

	HCI_DM_FIELD_GENERATOR,

	HCI_LOOPBACK,

	HCI_DM_FWUPD_START,

	HCI_DM_FWUPD_END,

	HCI_DM_VDC_MEASUREMENT_VALUE,

	HCI_DM_VDC_VALUE_COMPARISON,

	MANUFACTURER_SPECIFIC,

};



struct st_nci_vendor_info {

	struct completion req_completion;

	struct sk_buff *rx_skb;

};



struct st_nci_info {

	struct llt_ndlc *ndlc;

	unsigned long flags;

	struct st_nci_se_info se_info;

	struct st_nci_vendor_info vendor_info;

};



void st_nci_remove(struct nci_dev *ndev);
@@ -85,4 +149,8 @@ void st_nci_hci_event_received(struct nci_dev *ndev, u8 pipe, 
void st_nci_hci_cmd_received(struct nci_dev *ndev, u8 pipe, u8 cmd,

						struct sk_buff *skb);



void st_nci_hci_loopback_event_received(struct nci_dev *ndev, u8 event,

					 struct sk_buff *skb);

int st_nci_vendor_cmds_init(struct nci_dev *ndev);



#endif /* __LOCAL_ST_NCI_H_ */

drivers/nfc/st-nci/vendor_cmds.c

0 → 100644
+516 −0
Original line number Diff line number Diff line 
/*

 * Proprietary commands extension for STMicroelectronics NFC NCI Chip

 *

 * Copyright (C) 2014-2015  STMicroelectronics SAS. All rights reserved.

 *

 * This program is free software; you can redistribute it and/or modify it

 * under the terms and conditions of the GNU General Public License,

 * version 2, as published by the Free Software Foundation.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the

 * GNU General Public License for more details.

 *

 * You should have received a copy of the GNU General Public License

 * along with this program; if not, see <http://www.gnu.org/licenses/>.

 */



#include <net/genetlink.h>

#include <linux/module.h>

#include <linux/nfc.h>

#include <linux/delay.h>

#include <net/nfc/nci_core.h>



#include "st-nci.h"



#define ST_NCI_HCI_DM_GETDATA			0x10

#define ST_NCI_HCI_DM_PUTDATA			0x11

#define ST_NCI_HCI_DM_LOAD			0x12

#define ST_NCI_HCI_DM_GETINFO			0x13

#define ST_NCI_HCI_DM_FWUPD_START		0x14

#define ST_NCI_HCI_DM_FWUPD_STOP		0x15

#define ST_NCI_HCI_DM_UPDATE_AID		0x20

#define ST_NCI_HCI_DM_RESET			0x3e



#define ST_NCI_HCI_DM_FIELD_GENERATOR		0x32

#define ST_NCI_HCI_DM_VDC_MEASUREMENT_VALUE	0x33

#define ST_NCI_HCI_DM_VDC_VALUE_COMPARISON	0x34



#define ST_NCI_FACTORY_MODE_ON			1

#define ST_NCI_FACTORY_MODE_OFF			0



#define ST_NCI_EVT_POST_DATA			0x02



struct get_param_data {

	u8 gate;

	u8 data;

} __packed;



static int st_nci_factory_mode(struct nfc_dev *dev, void *data,

			       size_t data_len)

{

	struct nci_dev *ndev = nfc_get_drvdata(dev);

	struct st_nci_info *info = nci_get_drvdata(ndev);



	if (data_len != 1)

		return -EINVAL;



	pr_debug("factory mode: %x\n", ((u8 *)data)[0]);



	switch (((u8 *)data)[0]) {

	case ST_NCI_FACTORY_MODE_ON:

		test_and_set_bit(ST_NCI_FACTORY_MODE, &info->flags);

	break;

	case ST_NCI_FACTORY_MODE_OFF:

		clear_bit(ST_NCI_FACTORY_MODE, &info->flags);

	break;

	default:

		return -EINVAL;

	}



	return 0;

}



static int st_nci_hci_clear_all_pipes(struct nfc_dev *dev, void *data,

				      size_t data_len)

{

	struct nci_dev *ndev = nfc_get_drvdata(dev);



	return nci_hci_clear_all_pipes(ndev);

}



static int st_nci_hci_dm_put_data(struct nfc_dev *dev, void *data,

				  size_t data_len)

{

	struct nci_dev *ndev = nfc_get_drvdata(dev);



	return nci_hci_send_cmd(ndev, ST_NCI_DEVICE_MGNT_GATE,

				ST_NCI_HCI_DM_PUTDATA, data,

				data_len, NULL);

}



static int st_nci_hci_dm_update_aid(struct nfc_dev *dev, void *data,

				    size_t data_len)

{

	struct nci_dev *ndev = nfc_get_drvdata(dev);



	return nci_hci_send_cmd(ndev, ST_NCI_DEVICE_MGNT_GATE,

			ST_NCI_HCI_DM_UPDATE_AID, data, data_len, NULL);

}



static int st_nci_hci_dm_get_info(struct nfc_dev *dev, void *data,

				  size_t data_len)

{

	int r;

	struct sk_buff *msg, *skb;

	struct nci_dev *ndev = nfc_get_drvdata(dev);



	r = nci_hci_send_cmd(ndev, ST_NCI_DEVICE_MGNT_GATE, ST_NCI_HCI_DM_GETINFO,

			     data, data_len, &skb);

	if (r)

		goto exit;



	msg = nfc_vendor_cmd_alloc_reply_skb(dev, ST_NCI_VENDOR_OUI,

					     HCI_DM_GET_INFO, skb->len);

	if (!msg) {

		r = -ENOMEM;

		goto free_skb;

	}



	if (nla_put(msg, NFC_ATTR_VENDOR_DATA, skb->len, skb->data)) {

		kfree_skb(msg);

		r = -ENOBUFS;

		goto free_skb;

	}



	r = nfc_vendor_cmd_reply(msg);



free_skb:

	kfree_skb(skb);

exit:

	return r;

}



static int st_nci_hci_dm_get_data(struct nfc_dev *dev, void *data,

				  size_t data_len)

{

	int r;

	struct sk_buff *msg, *skb;

	struct nci_dev *ndev = nfc_get_drvdata(dev);



	r = nci_hci_send_cmd(ndev, ST_NCI_DEVICE_MGNT_GATE, ST_NCI_HCI_DM_GETDATA,

			     data, data_len, &skb);

	if (r)

		goto exit;



	msg = nfc_vendor_cmd_alloc_reply_skb(dev, ST_NCI_VENDOR_OUI,

					     HCI_DM_GET_DATA, skb->len);

	if (!msg) {

		r = -ENOMEM;

		goto free_skb;

	}



	if (nla_put(msg, NFC_ATTR_VENDOR_DATA, skb->len, skb->data)) {

		kfree_skb(msg);

		r = -ENOBUFS;

		goto free_skb;

	}



	r = nfc_vendor_cmd_reply(msg);



free_skb:

	kfree_skb(skb);

exit:

	return r;

}



static int st_nci_hci_dm_fwupd_start(struct nfc_dev *dev, void *data,

				     size_t data_len)

{

	int r;

	struct nci_dev *ndev = nfc_get_drvdata(dev);



	dev->fw_download_in_progress = true;

	r = nci_hci_send_cmd(ndev, ST_NCI_DEVICE_MGNT_GATE,

			ST_NCI_HCI_DM_FWUPD_START, data, data_len, NULL);

	if (r)

		dev->fw_download_in_progress = false;



	return r;

}



static int st_nci_hci_dm_fwupd_end(struct nfc_dev *dev, void *data,

				   size_t data_len)

{

	struct nci_dev *ndev = nfc_get_drvdata(dev);



	return nci_hci_send_cmd(ndev, ST_NCI_DEVICE_MGNT_GATE,

			ST_NCI_HCI_DM_FWUPD_STOP, data, data_len, NULL);

}



static int st_nci_hci_dm_direct_load(struct nfc_dev *dev, void *data,

				     size_t data_len)

{

	struct nci_dev *ndev = nfc_get_drvdata(dev);



	if (dev->fw_download_in_progress) {

		dev->fw_download_in_progress = false;

		return nci_hci_send_cmd(ndev, ST_NCI_DEVICE_MGNT_GATE,

				ST_NCI_HCI_DM_LOAD, data, data_len, NULL);

	}

	return -EPROTO;

}



static int st_nci_hci_dm_reset(struct nfc_dev *dev, void *data,

			       size_t data_len)

{

	struct nci_dev *ndev = nfc_get_drvdata(dev);



	nci_hci_send_cmd(ndev, ST_NCI_DEVICE_MGNT_GATE,

			ST_NCI_HCI_DM_RESET, data, data_len, NULL);

	msleep(200);



	return 0;

}



static int st_nci_hci_get_param(struct nfc_dev *dev, void *data,

				size_t data_len)

{

	int r;

	struct sk_buff *msg, *skb;

	struct nci_dev *ndev = nfc_get_drvdata(dev);

	struct get_param_data *param = (struct get_param_data *)data;



	if (data_len < sizeof(struct get_param_data))

		return -EPROTO;



	r = nci_hci_get_param(ndev, param->gate, param->data, &skb);

	if (r)

		goto exit;



	msg = nfc_vendor_cmd_alloc_reply_skb(dev, ST_NCI_VENDOR_OUI,

					     HCI_GET_PARAM, skb->len);

	if (!msg) {

		r = -ENOMEM;

		goto free_skb;

	}



	if (nla_put(msg, NFC_ATTR_VENDOR_DATA, skb->len, skb->data)) {

		kfree_skb(msg);

		r = -ENOBUFS;

		goto free_skb;

	}



	r = nfc_vendor_cmd_reply(msg);



free_skb:

	kfree_skb(skb);

exit:

	return r;

}



static int st_nci_hci_dm_field_generator(struct nfc_dev *dev, void *data,

					 size_t data_len)

{

	struct nci_dev *ndev = nfc_get_drvdata(dev);



	return nci_hci_send_cmd(ndev, ST_NCI_DEVICE_MGNT_GATE,

				ST_NCI_HCI_DM_FIELD_GENERATOR, data, data_len, NULL);

}



static int st_nci_hci_dm_vdc_measurement_value(struct nfc_dev *dev, void *data,

					       size_t data_len)

{

	int r;

	struct sk_buff *msg, *skb;

	struct nci_dev *ndev = nfc_get_drvdata(dev);



	if (data_len != 4)

		return -EPROTO;



	r = nci_hci_send_cmd(ndev, ST_NCI_DEVICE_MGNT_GATE,

			     ST_NCI_HCI_DM_VDC_MEASUREMENT_VALUE,

			     data, data_len, &skb);

	if (r)

		goto exit;



	msg = nfc_vendor_cmd_alloc_reply_skb(dev, ST_NCI_VENDOR_OUI,

				HCI_DM_VDC_MEASUREMENT_VALUE, skb->len);

	if (!msg) {

		r = -ENOMEM;

		goto free_skb;

	}



	if (nla_put(msg, NFC_ATTR_VENDOR_DATA, skb->len, skb->data)) {

		kfree_skb(msg);

		r = -ENOBUFS;

		goto free_skb;

	}



	r = nfc_vendor_cmd_reply(msg);



free_skb:

	kfree_skb(skb);

exit:

	return r;

}



static int st_nci_hci_dm_vdc_value_comparison(struct nfc_dev *dev, void *data,

					      size_t data_len)

{

	int r;

	struct sk_buff *msg, *skb;

	struct nci_dev *ndev = nfc_get_drvdata(dev);



	if (data_len != 2)

		return -EPROTO;



	r = nci_hci_send_cmd(ndev, ST_NCI_DEVICE_MGNT_GATE,

			     ST_NCI_HCI_DM_VDC_VALUE_COMPARISON,

			     data, data_len, &skb);

	if (r)

		goto exit;



	msg = nfc_vendor_cmd_alloc_reply_skb(dev, ST_NCI_VENDOR_OUI,

					HCI_DM_VDC_VALUE_COMPARISON, skb->len);

	if (!msg) {

		r = -ENOMEM;

		goto free_skb;

	}



	if (nla_put(msg, NFC_ATTR_VENDOR_DATA, skb->len, skb->data)) {

		kfree_skb(msg);

		r = -ENOBUFS;

		goto free_skb;

	}



	r = nfc_vendor_cmd_reply(msg);



free_skb:

	kfree_skb(skb);

exit:

	return r;

}



void st_nci_hci_loopback_event_received(struct nci_dev *ndev, u8 event,

					struct sk_buff *skb)

{

	struct st_nci_info *info = nci_get_drvdata(ndev);



	switch (event) {

	case ST_NCI_EVT_POST_DATA:

		info->vendor_info.rx_skb = skb;

	break;

	default:

		nfc_err(&ndev->nfc_dev->dev, "Unexpected event on loopback gate\n");

	}

	complete(&info->vendor_info.req_completion);

}

EXPORT_SYMBOL(st_nci_hci_loopback_event_received);



static int st_nci_hci_loopback(struct nfc_dev *dev, void *data,

			       size_t data_len)

{

	int r;

	struct sk_buff *msg;

	struct nci_dev *ndev = nfc_get_drvdata(dev);

	struct st_nci_info *info = nci_get_drvdata(ndev);



	if (data_len <= 0)

		return -EPROTO;



	reinit_completion(&info->vendor_info.req_completion);

	info->vendor_info.rx_skb = NULL;



	r = nci_hci_send_event(ndev, NCI_HCI_LOOPBACK_GATE,

			       ST_NCI_EVT_POST_DATA, data, data_len);

	if (r != data_len) {

		r = -EPROTO;

		goto exit;

	}



	wait_for_completion_interruptible(&info->vendor_info.req_completion);



	if (!info->vendor_info.rx_skb ||

	    info->vendor_info.rx_skb->len != data_len) {

		r = -EPROTO;

		goto exit;

	}



	msg = nfc_vendor_cmd_alloc_reply_skb(ndev->nfc_dev,

					ST_NCI_VENDOR_OUI,

					HCI_LOOPBACK,

					info->vendor_info.rx_skb->len);

	if (!msg) {

		r = -ENOMEM;

		goto free_skb;

	}



	if (nla_put(msg, NFC_ATTR_VENDOR_DATA, info->vendor_info.rx_skb->len,

		    info->vendor_info.rx_skb->data)) {

		kfree_skb(msg);

		r = -ENOBUFS;

		goto free_skb;

	}



	r = nfc_vendor_cmd_reply(msg);

free_skb:

	kfree_skb(info->vendor_info.rx_skb);

exit:

	return r;

}



static int st_nci_manufacturer_specific(struct nfc_dev *dev, void *data,

					size_t data_len)

{

	struct sk_buff *msg;

	struct nci_dev *ndev = nfc_get_drvdata(dev);



	msg = nfc_vendor_cmd_alloc_reply_skb(dev, ST_NCI_VENDOR_OUI,

					MANUFACTURER_SPECIFIC,

					sizeof(ndev->manufact_specific_info));

	if (!msg)

		return -ENOMEM;



	if (nla_put(msg, NFC_ATTR_VENDOR_DATA, sizeof(ndev->manufact_specific_info),

		    &ndev->manufact_specific_info)) {

		kfree_skb(msg);

		return -ENOBUFS;

	}



	return nfc_vendor_cmd_reply(msg);

}



static struct nfc_vendor_cmd st_nci_vendor_cmds[] = {

	{

		.vendor_id = ST_NCI_VENDOR_OUI,

		.subcmd = FACTORY_MODE,

		.doit = st_nci_factory_mode,

	},

	{

		.vendor_id = ST_NCI_VENDOR_OUI,

		.subcmd = HCI_CLEAR_ALL_PIPES,

		.doit = st_nci_hci_clear_all_pipes,

	},

	{

		.vendor_id = ST_NCI_VENDOR_OUI,

		.subcmd = HCI_DM_PUT_DATA,

		.doit = st_nci_hci_dm_put_data,

	},

	{

		.vendor_id = ST_NCI_VENDOR_OUI,

		.subcmd = HCI_DM_UPDATE_AID,

		.doit = st_nci_hci_dm_update_aid,

	},

	{

		.vendor_id = ST_NCI_VENDOR_OUI,

		.subcmd = HCI_DM_GET_INFO,

		.doit = st_nci_hci_dm_get_info,

	},

	{

		.vendor_id = ST_NCI_VENDOR_OUI,

		.subcmd = HCI_DM_GET_DATA,

		.doit = st_nci_hci_dm_get_data,

	},

	{

		.vendor_id = ST_NCI_VENDOR_OUI,

		.subcmd = HCI_DM_DIRECT_LOAD,

		.doit = st_nci_hci_dm_direct_load,

	},

	{

		.vendor_id = ST_NCI_VENDOR_OUI,

		.subcmd = HCI_DM_RESET,

		.doit = st_nci_hci_dm_reset,

	},

	{

		.vendor_id = ST_NCI_VENDOR_OUI,

		.subcmd = HCI_GET_PARAM,

		.doit = st_nci_hci_get_param,

	},

	{

		.vendor_id = ST_NCI_VENDOR_OUI,

		.subcmd = HCI_DM_FIELD_GENERATOR,

		.doit = st_nci_hci_dm_field_generator,

	},

	{

		.vendor_id = ST_NCI_VENDOR_OUI,

		.subcmd = HCI_DM_FWUPD_START,

		.doit = st_nci_hci_dm_fwupd_start,

	},

	{

		.vendor_id = ST_NCI_VENDOR_OUI,

		.subcmd = HCI_DM_FWUPD_END,

		.doit = st_nci_hci_dm_fwupd_end,

	},

	{

		.vendor_id = ST_NCI_VENDOR_OUI,

		.subcmd = HCI_LOOPBACK,

		.doit = st_nci_hci_loopback,

	},

	{

		.vendor_id = ST_NCI_VENDOR_OUI,

		.subcmd = HCI_DM_VDC_MEASUREMENT_VALUE,

		.doit = st_nci_hci_dm_vdc_measurement_value,

	},

	{

		.vendor_id = ST_NCI_VENDOR_OUI,

		.subcmd = HCI_DM_VDC_VALUE_COMPARISON,

		.doit = st_nci_hci_dm_vdc_value_comparison,

	},

	{

		.vendor_id = ST_NCI_VENDOR_OUI,

		.subcmd = MANUFACTURER_SPECIFIC,

		.doit = st_nci_manufacturer_specific,

	},

};



int st_nci_vendor_cmds_init(struct nci_dev *ndev)

{

	struct st_nci_info *info = nci_get_drvdata(ndev);



	init_completion(&info->vendor_info.req_completion);

	return nfc_set_vendor_cmds(ndev->nfc_dev, st_nci_vendor_cmds,

				   sizeof(st_nci_vendor_cmds));

}

EXPORT_SYMBOL(st_nci_vendor_cmds_init);

CRA Git | Maintained and supported by SUSTech CRA and CCSE