Commit b1dae3d8 authored by Olof Johansson's avatar Olof Johansson
Browse files

Merge tag 'fixes-v4.0-rc4' of... 

Merge tag 'fixes-v4.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes

Fixes for omaps for the -rc cycle:

- Fix a device tree based booting vs legacy booting regression for
  omap3 crypto hardware by adding the missing DMA channels.

- Fix /sys/bus/soc/devices/soc0/family for am33xx devices.

- Fix two timer issues that can cause hangs if the timer related
  hwmod data is missing like it often initially is for new SoCs.

- Remove pcie hwmods entry from dts as that causes runtime PM to
  fail for the PHYs.

- A paper bag type dts configuration fix for dm816x GPIO
  interrupts that I just noticed. This is most of the changes
  diffstat wise, but as it's a basic feature for connecting
  devices and things work otherwise, it should be fixed.

* tag 'fixes-v4.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap

:
  ARM: dts: Fix gpio interrupts for dm816x
  ARM: dts: dra7: remove ti,hwmod property from pcie phy
  ARM: OMAP: dmtimer: disable pm runtime on remove
  ARM: OMAP: dmtimer: check for pm_runtime_get_sync() failure
  ARM: OMAP2+: Fix socbus family info for AM33xx devices
  ARM: dts: omap3: Add missing dmas for crypto

Signed-off-by: default avatarOlof Johansson <olof@lixom.net>
parents ebc0aa8f 599c376c

arch/arm/boot/dts/dm8168-evm.dts

+19 −0
Original line number Diff line number Diff line
@@ -36,6 +36,20 @@ 
		>;

	};



	mmc_pins: pinmux_mmc_pins {

		pinctrl-single,pins = <

			DM816X_IOPAD(0x0a70, MUX_MODE0)			/* SD_POW */

			DM816X_IOPAD(0x0a74, MUX_MODE0)			/* SD_CLK */

			DM816X_IOPAD(0x0a78, MUX_MODE0)			/* SD_CMD */

			DM816X_IOPAD(0x0a7C, MUX_MODE0)			/* SD_DAT0 */

			DM816X_IOPAD(0x0a80, MUX_MODE0)			/* SD_DAT1 */

			DM816X_IOPAD(0x0a84, MUX_MODE0)			/* SD_DAT2 */

			DM816X_IOPAD(0x0a88, MUX_MODE0)			/* SD_DAT2 */

			DM816X_IOPAD(0x0a8c, MUX_MODE2)			/* GP1[7] */

			DM816X_IOPAD(0x0a90, MUX_MODE2)			/* GP1[8] */

		>;

	};



	usb0_pins: pinmux_usb0_pins {

		pinctrl-single,pins = <

			DM816X_IOPAD(0x0d00, MUX_MODE0)			/* USB0_DRVVBUS */
@@ -137,7 +151,12 @@ 
};



&mmc1 {

	pinctrl-names = "default";

	pinctrl-0 = <&mmc_pins>;

	vmmc-supply = <&vmmcsd_fixed>;

	bus-width = <4>;

	cd-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;

	wp-gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;

};



/* At least dm8168-evm rev c won't support multipoint, later may */

arch/arm/boot/dts/dm816x.dtsi

+14 −4
Original line number Diff line number Diff line
@@ -150,17 +150,27 @@ 
		};



		gpio1: gpio@48032000 {

			compatible = "ti,omap3-gpio";

			compatible = "ti,omap4-gpio";

			ti,hwmods = "gpio1";

			ti,gpio-always-on;

			reg = <0x48032000 0x1000>;

			interrupts = <97>;

			interrupts = <96>;

			gpio-controller;

			#gpio-cells = <2>;

			interrupt-controller;

			#interrupt-cells = <2>;

		};



		gpio2: gpio@4804c000 {

			compatible = "ti,omap3-gpio";

			compatible = "ti,omap4-gpio";

			ti,hwmods = "gpio2";

			ti,gpio-always-on;

			reg = <0x4804c000 0x1000>;

			interrupts = <99>;

			interrupts = <98>;

			gpio-controller;

			#gpio-cells = <2>;

			interrupt-controller;

			#interrupt-cells = <2>;

		};



		gpmc: gpmc@50000000 {

arch/arm/boot/dts/dra7.dtsi

+0 −2
Original line number Diff line number Diff line
@@ -1111,7 +1111,6 @@ 
					      "wkupclk", "refclk",

					      "div-clk", "phy-div";

				#phy-cells = <0>;

				ti,hwmods = "pcie1-phy";

			};



			pcie2_phy: pciephy@4a095000 {
@@ -1130,7 +1129,6 @@ 
					      "wkupclk", "refclk",

					      "div-clk", "phy-div";

				#phy-cells = <0>;

				ti,hwmods = "pcie2-phy";

				status = "disabled";

			};

		};

arch/arm/boot/dts/omap3.dtsi

+4 −0
Original line number Diff line number Diff line
@@ -92,6 +92,8 @@ 
			ti,hwmods = "aes";

			reg = <0x480c5000 0x50>;

			interrupts = <0>;

			dmas = <&sdma 65 &sdma 66>;

			dma-names = "tx", "rx";

		};



		prm: prm@48306000 {
@@ -550,6 +552,8 @@ 
			ti,hwmods = "sham";

			reg = <0x480c3000 0x64>;

			interrupts = <49>;

			dmas = <&sdma 69>;

			dma-names = "rx";

		};



		smartreflex_core: smartreflex@480cb000 {

arch/arm/mach-omap2/id.c

+2 −0
Original line number Diff line number Diff line
@@ -720,6 +720,8 @@ static const char * __init omap_get_family(void) 
		return kasprintf(GFP_KERNEL, "OMAP4");

	else if (soc_is_omap54xx())

		return kasprintf(GFP_KERNEL, "OMAP5");

	else if (soc_is_am33xx() || soc_is_am335x())

		return kasprintf(GFP_KERNEL, "AM33xx");

	else if (soc_is_am43xx())

		return kasprintf(GFP_KERNEL, "AM43xx");

	else if (soc_is_dra7xx())

CRA Git | Maintained and supported by SUSTech CRA and CCSE