Commit b048b4e1 authored by Paul Gortmaker's avatar Paul Gortmaker Committed by Kumar Gala
Browse files

powerpc: remove Wind River SBC8560 support 



This reference board dates back to 2004, and is largely a legacy
EOL product.  The MPC8560 is a pre e500v2 CPU.  The SBC8548 is
a more modern, better e500v2 target for people to use as a
reference board with today's kernels, should they require one.

Removing support for it will also allow us to remove some
sbc8560 specific quirk handling in 8250 UART code, and some
MTD mapping support.

Cc: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: default avatarPaul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: default avatarKumar Gala <galak@kernel.crashing.org>
parent 572546b3

arch/powerpc/boot/Makefile

+0 −1
Original line number Diff line number Diff line
@@ -276,7 +276,6 @@ image-$(CONFIG_TQM8548) += cuImage.tqm8548 
image-$(CONFIG_TQM8555)			+= cuImage.tqm8555

image-$(CONFIG_TQM8560)			+= cuImage.tqm8560

image-$(CONFIG_SBC8548)			+= cuImage.sbc8548

image-$(CONFIG_SBC8560)			+= cuImage.sbc8560

image-$(CONFIG_KSI8560)			+= cuImage.ksi8560



# Board ports in arch/powerpc/platform/embedded6xx/Kconfig

arch/powerpc/boot/dts/sbc8560.dts

deleted100644 → 0
+0 −406
Original line number Diff line number Diff line 
/*

 * SBC8560 Device Tree Source

 *

 * Copyright 2007 Wind River Systems Inc.

 *

 * Paul Gortmaker (see MAINTAINERS for contact information)

 *

 * This program is free software; you can redistribute  it and/or modify it

 * under  the terms of  the GNU General  Public License as published by the

 * Free Software Foundation;  either version 2 of the  License, or (at your

 * option) any later version.

 */



/dts-v1/;



/ {

	model = "SBC8560";

	compatible = "SBC8560";

	#address-cells = <1>;

	#size-cells = <1>;



	aliases {

		ethernet0 = &enet0;

		ethernet1 = &enet1;

		ethernet2 = &enet2;

		ethernet3 = &enet3;

		serial0 = &serial0;

		serial1 = &serial1;

		pci0 = &pci0;

	};



	cpus {

		#address-cells = <1>;

		#size-cells = <0>;



		PowerPC,8560@0 {

			device_type = "cpu";

			reg = <0>;

			d-cache-line-size = <0x20>;	// 32 bytes

			i-cache-line-size = <0x20>;	// 32 bytes

			d-cache-size = <0x8000>;	// L1, 32K

			i-cache-size = <0x8000>;	// L1, 32K

			timebase-frequency = <0>;	// From uboot

			bus-frequency = <0>;

			clock-frequency = <0>;

			next-level-cache = <&L2>;

		};

	};



	memory {

		device_type = "memory";

		reg = <0x00000000 0x20000000>;

	};



	soc@ff700000 {

		#address-cells = <1>;

		#size-cells = <1>;

		device_type = "soc";

		ranges = <0x0 0xff700000 0x00100000>;

		clock-frequency = <0>;



		ecm-law@0 {

			compatible = "fsl,ecm-law";

			reg = <0x0 0x1000>;

			fsl,num-laws = <8>;

		};



		ecm@1000 {

			compatible = "fsl,mpc8560-ecm", "fsl,ecm";

			reg = <0x1000 0x1000>;

			interrupts = <17 2>;

			interrupt-parent = <&mpic>;

		};



		memory-controller@2000 {

			compatible = "fsl,mpc8560-memory-controller";

			reg = <0x2000 0x1000>;

			interrupt-parent = <&mpic>;

			interrupts = <0x12 0x2>;

		};



		L2: l2-cache-controller@20000 {

			compatible = "fsl,mpc8560-l2-cache-controller";

			reg = <0x20000 0x1000>;

			cache-line-size = <0x20>;	// 32 bytes

			cache-size = <0x40000>;		// L2, 256K

			interrupt-parent = <&mpic>;

			interrupts = <0x10 0x2>;

		};



		i2c@3000 {

			#address-cells = <1>;

			#size-cells = <0>;

			cell-index = <0>;

			compatible = "fsl-i2c";

			reg = <0x3000 0x100>;

			interrupts = <0x2b 0x2>;

			interrupt-parent = <&mpic>;

			dfsrr;

		};



		i2c@3100 {

			#address-cells = <1>;

			#size-cells = <0>;

			cell-index = <1>;

			compatible = "fsl-i2c";

			reg = <0x3100 0x100>;

			interrupts = <0x2b 0x2>;

			interrupt-parent = <&mpic>;

			dfsrr;

		};



		dma@21300 {

			#address-cells = <1>;

			#size-cells = <1>;

			compatible = "fsl,mpc8560-dma", "fsl,eloplus-dma";

			reg = <0x21300 0x4>;

			ranges = <0x0 0x21100 0x200>;

			cell-index = <0>;

			dma-channel@0 {

				compatible = "fsl,mpc8560-dma-channel",

						"fsl,eloplus-dma-channel";

				reg = <0x0 0x80>;

				cell-index = <0>;

				interrupt-parent = <&mpic>;

				interrupts = <20 2>;

			};

			dma-channel@80 {

				compatible = "fsl,mpc8560-dma-channel",

						"fsl,eloplus-dma-channel";

				reg = <0x80 0x80>;

				cell-index = <1>;

				interrupt-parent = <&mpic>;

				interrupts = <21 2>;

			};

			dma-channel@100 {

				compatible = "fsl,mpc8560-dma-channel",

						"fsl,eloplus-dma-channel";

				reg = <0x100 0x80>;

				cell-index = <2>;

				interrupt-parent = <&mpic>;

				interrupts = <22 2>;

			};

			dma-channel@180 {

				compatible = "fsl,mpc8560-dma-channel",

						"fsl,eloplus-dma-channel";

				reg = <0x180 0x80>;

				cell-index = <3>;

				interrupt-parent = <&mpic>;

				interrupts = <23 2>;

			};

		};



		enet0: ethernet@24000 {

			#address-cells = <1>;

			#size-cells = <1>;

			cell-index = <0>;

			device_type = "network";

			model = "TSEC";

			compatible = "gianfar";

			reg = <0x24000 0x1000>;

			ranges = <0x0 0x24000 0x1000>;

			local-mac-address = [ 00 00 00 00 00 00 ];

			interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>;

			interrupt-parent = <&mpic>;

			tbi-handle = <&tbi0>;

			phy-handle = <&phy0>;



			mdio@520 {

				#address-cells = <1>;

				#size-cells = <0>;

				compatible = "fsl,gianfar-mdio";

				reg = <0x520 0x20>;

				phy0: ethernet-phy@19 {

					interrupt-parent = <&mpic>;

					interrupts = <0x6 0x1>;

					reg = <0x19>;

					device_type = "ethernet-phy";

				};

				phy1: ethernet-phy@1a {

					interrupt-parent = <&mpic>;

					interrupts = <0x7 0x1>;

					reg = <0x1a>;

					device_type = "ethernet-phy";

				};

				phy2: ethernet-phy@1b {

					interrupt-parent = <&mpic>;

					interrupts = <0x8 0x1>;

					reg = <0x1b>;

					device_type = "ethernet-phy";

				};

				phy3: ethernet-phy@1c {

					interrupt-parent = <&mpic>;

					interrupts = <0x8 0x1>;

					reg = <0x1c>;

					device_type = "ethernet-phy";

				};

				tbi0: tbi-phy@11 {

					reg = <0x11>;

					device_type = "tbi-phy";

				};

			};

		};



		enet1: ethernet@25000 {

			#address-cells = <1>;

			#size-cells = <1>;

			cell-index = <1>;

			device_type = "network";

			model = "TSEC";

			compatible = "gianfar";

			reg = <0x25000 0x1000>;

			ranges = <0x0 0x25000 0x1000>;

			local-mac-address = [ 00 00 00 00 00 00 ];

			interrupts = <0x23 0x2 0x24 0x2 0x28 0x2>;

			interrupt-parent = <&mpic>;

			tbi-handle = <&tbi1>;

			phy-handle = <&phy1>;



			mdio@520 {

				#address-cells = <1>;

				#size-cells = <0>;

				compatible = "fsl,gianfar-tbi";

				reg = <0x520 0x20>;



				tbi1: tbi-phy@11 {

					reg = <0x11>;

					device_type = "tbi-phy";

				};

			};

		};



		mpic: pic@40000 {

			interrupt-controller;

			#address-cells = <0>;

			#interrupt-cells = <2>;

			compatible = "chrp,open-pic";

			reg = <0x40000 0x40000>;

			device_type = "open-pic";

		};



		cpm@919c0 {

			#address-cells = <1>;

			#size-cells = <1>;

			compatible = "fsl,mpc8560-cpm", "fsl,cpm2";

			reg = <0x919c0 0x30>;

			ranges;



			muram@80000 {

				#address-cells = <1>;

				#size-cells = <1>;

				ranges = <0x0 0x80000 0x10000>;



				data@0 {

					compatible = "fsl,cpm-muram-data";

					reg = <0x0 0x4000 0x9000 0x2000>;

				};

			};



			brg@919f0 {

				compatible = "fsl,mpc8560-brg",

				             "fsl,cpm2-brg",

				             "fsl,cpm-brg";

				reg = <0x919f0 0x10 0x915f0 0x10>;

				clock-frequency = <165000000>;

			};



			cpmpic: pic@90c00 {

				interrupt-controller;

				#address-cells = <0>;

				#interrupt-cells = <2>;

				interrupts = <0x2e 0x2>;

				interrupt-parent = <&mpic>;

				reg = <0x90c00 0x80>;

				compatible = "fsl,mpc8560-cpm-pic", "fsl,cpm2-pic";

			};



			enet2: ethernet@91320 {

				device_type = "network";

				compatible = "fsl,mpc8560-fcc-enet",

				             "fsl,cpm2-fcc-enet";

				reg = <0x91320 0x20 0x88500 0x100 0x913b0 0x1>;

				local-mac-address = [ 00 00 00 00 00 00 ];

				fsl,cpm-command = <0x16200300>;

				interrupts = <0x21 0x8>;

				interrupt-parent = <&cpmpic>;

				phy-handle = <&phy2>;

			};



			enet3: ethernet@91340 {

				device_type = "network";

				compatible = "fsl,mpc8560-fcc-enet",

				             "fsl,cpm2-fcc-enet";

				reg = <0x91340 0x20 0x88600 0x100 0x913d0 0x1>;

				local-mac-address = [ 00 00 00 00 00 00 ];

				fsl,cpm-command = <0x1a400300>;

				interrupts = <0x22 0x8>;

				interrupt-parent = <&cpmpic>;

				phy-handle = <&phy3>;

			};

		};



		global-utilities@e0000 {

			compatible = "fsl,mpc8560-guts";

			reg = <0xe0000 0x1000>;

		};

	};



	pci0: pci@ff708000 {

		#interrupt-cells = <1>;

		#size-cells = <2>;

		#address-cells = <3>;

		compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";

		device_type = "pci";

		reg = <0xff708000 0x1000>;

		clock-frequency = <66666666>;

		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;

		interrupt-map = <



			/* IDSEL 0x02 */

			0x1000 0x0 0x0 0x1 &mpic 0x2 0x1

			0x1000 0x0 0x0 0x2 &mpic 0x3 0x1

			0x1000 0x0 0x0 0x3 &mpic 0x4 0x1

			0x1000 0x0 0x0 0x4 &mpic 0x5 0x1>;



		interrupt-parent = <&mpic>;

		interrupts = <0x18 0x2>;

		bus-range = <0x0 0x0>;

		ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x20000000

			  0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;

	};



	localbus@ff705000 {

		compatible = "fsl,mpc8560-localbus", "simple-bus";

		#address-cells = <2>;

		#size-cells = <1>;

		reg = <0xff705000 0x100>;	// BRx, ORx, etc.



		ranges = <

			0x0 0x0 0xff800000 0x0800000	// 8MB boot flash

			0x1 0x0 0xe4000000 0x4000000	// 64MB flash

			0x3 0x0 0x20000000 0x4000000	// 64MB SDRAM

			0x4 0x0 0x24000000 0x4000000	// 64MB SDRAM

			0x5 0x0 0xfc000000 0x0c00000	// EPLD

			0x6 0x0 0xe0000000 0x4000000	// 64MB flash

			0x7 0x0 0x80000000 0x0200000	// ATM1,2

		>;



		epld@5,0 {

			compatible = "wrs,epld-localbus";

			#address-cells = <2>;

			#size-cells = <1>;

			reg = <0x5 0x0 0xc00000>;

			ranges = <

				0x0 0x0 0x5 0x000000 0x1fff	// LED disp.

				0x1 0x0 0x5 0x100000 0x1fff	// switches

				0x2 0x0 0x5 0x200000 0x1fff	// ID reg.

				0x3 0x0 0x5 0x300000 0x1fff	// status reg.

				0x4 0x0 0x5 0x400000 0x1fff	// reset reg.

				0x5 0x0 0x5 0x500000 0x1fff	// Wind port

				0x7 0x0 0x5 0x700000 0x1fff	// UART #1

				0x8 0x0 0x5 0x800000 0x1fff	// UART #2

				0x9 0x0 0x5 0x900000 0x1fff	// RTC

				0xb 0x0 0x5 0xb00000 0x1fff	// EEPROM

			>;



			bidr@2,0 {

				compatible = "wrs,sbc8560-bidr";

				reg = <0x2 0x0 0x10>;

			};



			bcsr@3,0 {

				compatible = "wrs,sbc8560-bcsr";

				reg = <0x3 0x0 0x10>;

			};



			brstcr@4,0 {

				compatible = "wrs,sbc8560-brstcr";

				reg = <0x4 0x0 0x10>;

			};



			serial0: serial@7,0 {

				device_type = "serial";

				compatible = "ns16550";

				reg = <0x7 0x0 0x100>;

				clock-frequency = <1843200>;

				interrupts = <0x9 0x2>;

				interrupt-parent = <&mpic>;

			};



			serial1: serial@8,0 {

				device_type = "serial";

				compatible = "ns16550";

				reg = <0x8 0x0 0x100>;

				clock-frequency = <1843200>;

				interrupts = <0xa 0x2>;

				interrupt-parent = <&mpic>;

			};



			rtc@9,0 {

				compatible = "m48t59";

				reg = <0x9 0x0 0x1fff>;

			};

		};

	};

};

arch/powerpc/configs/85xx/sbc8560_defconfig

deleted100644 → 0
+0 −65
Original line number Diff line number Diff line 
CONFIG_PPC_85xx=y

CONFIG_EXPERIMENTAL=y

CONFIG_SYSVIPC=y

CONFIG_LOG_BUF_SHIFT=14

CONFIG_BLK_DEV_INITRD=y

# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set

CONFIG_EXPERT=y

CONFIG_SLAB=y

# CONFIG_BLK_DEV_BSG is not set

CONFIG_SBC8560=y

CONFIG_BINFMT_MISC=y

CONFIG_SPARSE_IRQ=y

# CONFIG_SECCOMP is not set

CONFIG_NET=y

CONFIG_PACKET=y

CONFIG_UNIX=y

CONFIG_XFRM_USER=y

CONFIG_INET=y

CONFIG_IP_MULTICAST=y

CONFIG_IP_PNP=y

CONFIG_IP_PNP_DHCP=y

CONFIG_IP_PNP_BOOTP=y

CONFIG_SYN_COOKIES=y

# CONFIG_INET_LRO is not set

# CONFIG_IPV6 is not set

CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"

# CONFIG_FW_LOADER is not set

CONFIG_PROC_DEVICETREE=y

CONFIG_BLK_DEV_LOOP=y

CONFIG_BLK_DEV_RAM=y

CONFIG_BLK_DEV_RAM_SIZE=32768

CONFIG_NETDEVICES=y

CONFIG_BROADCOM_PHY=y

CONFIG_NET_ETHERNET=y

CONFIG_MII=y

CONFIG_GIANFAR=y

# CONFIG_INPUT_MOUSEDEV is not set

# CONFIG_INPUT_KEYBOARD is not set

# CONFIG_INPUT_MOUSE is not set

# CONFIG_SERIO is not set

# CONFIG_VT is not set

CONFIG_SERIAL_8250=y

CONFIG_SERIAL_8250_CONSOLE=y

CONFIG_SERIAL_8250_NR_UARTS=2

CONFIG_SERIAL_8250_RUNTIME_UARTS=2

# CONFIG_HW_RANDOM is not set

CONFIG_VIDEO_OUTPUT_CONTROL=y

CONFIG_RTC_CLASS=y

CONFIG_RTC_DRV_M48T59=y

CONFIG_INOTIFY=y

CONFIG_PROC_KCORE=y

CONFIG_TMPFS=y

CONFIG_NFS_FS=y

CONFIG_ROOT_NFS=y

CONFIG_PARTITION_ADVANCED=y

# CONFIG_MSDOS_PARTITION is not set

CONFIG_MAGIC_SYSRQ=y

CONFIG_DEBUG_KERNEL=y

CONFIG_DETECT_HUNG_TASK=y

CONFIG_DEBUG_MUTEXES=y

# CONFIG_DEBUG_BUGVERBOSE is not set

# CONFIG_RCU_CPU_STALL_DETECTOR is not set

CONFIG_SYSCTL_SYSCALL_CHECK=y

CONFIG_PPC_EARLY_DEBUG=y

# CONFIG_CRYPTO_ANSI_CPRNG is not set

arch/powerpc/platforms/85xx/Kconfig

+0 −6
Original line number Diff line number Diff line
@@ -175,12 +175,6 @@ config SBC8548 
	help

	  This option enables support for the Wind River SBC8548 board



config SBC8560

	bool "Wind River SBC8560"

	select DEFAULT_UIMAGE

	help

	  This option enables support for the Wind River SBC8560 board



config GE_IMP3A

	bool "GE Intelligent Platforms IMP3A"

	select DEFAULT_UIMAGE

arch/powerpc/platforms/85xx/Makefile

+0 −1
Original line number Diff line number Diff line
@@ -22,7 +22,6 @@ obj-$(CONFIG_P4080_DS) += p4080_ds.o corenet_ds.o 
obj-$(CONFIG_P5020_DS)    += p5020_ds.o corenet_ds.o

obj-$(CONFIG_STX_GP3)	  += stx_gp3.o

obj-$(CONFIG_TQM85xx)	  += tqm85xx.o

obj-$(CONFIG_SBC8560)     += sbc8560.o

obj-$(CONFIG_SBC8548)     += sbc8548.o

obj-$(CONFIG_SOCRATES)    += socrates.o socrates_fpga_pic.o

obj-$(CONFIG_KSI8560)	  += ksi8560.o

CRA Git | Maintained and supported by SUSTech CRA and CCSE