scsi: remove NCR_Q720 driver (af8a6722) · Commits · 戴 / test

drivers/scsi/Kconfig

+4 −16

Original line number	Diff line number	Diff line
		@@ -989,21 +989,9 @@ config SCSI_ZALON
		used on the add-in Bluefish, Barracuda & Shrike SCSI cards.
		Say Y here if you have one of these machines or cards.

		config SCSI_NCR_Q720
		tristate "NCR Quad 720 MCA SCSI support"
		depends on MCA && SCSI
		select SCSI_SPI_ATTRS
		help
		This is a driver for the MicroChannel Quad 720 card produced by
		NCR and commonly used in 345x/35xx/4100 class machines. It always
		tries to negotiate sync and uses tag command queueing.

		Unless you have an NCR manufactured machine, the chances are that
		you do not have this SCSI card, so say N.

		config SCSI_NCR53C8XX_DEFAULT_TAGS
		int "default tagged command queue depth"
		depends on SCSI_ZALON \|\| SCSI_NCR_Q720
		depends on SCSI_ZALON
		default "8"
		---help---
		"Tagged command queuing" is a feature of SCSI-2 which improves
		@@ -1029,7 +1017,7 @@ config SCSI_NCR53C8XX_DEFAULT_TAGS

		config SCSI_NCR53C8XX_MAX_TAGS
		int "maximum number of queued commands"
		depends on SCSI_ZALON \|\| SCSI_NCR_Q720
		depends on SCSI_ZALON
		default "32"
		---help---
		This option allows you to specify the maximum number of commands
		@@ -1046,7 +1034,7 @@ config SCSI_NCR53C8XX_MAX_TAGS

		config SCSI_NCR53C8XX_SYNC
		int "synchronous transfers frequency in MHz"
		depends on SCSI_ZALON \|\| SCSI_NCR_Q720
		depends on SCSI_ZALON
		default "20"
		---help---
		The SCSI Parallel Interface-2 Standard defines 5 classes of transfer
		@@ -1080,7 +1068,7 @@ config SCSI_NCR53C8XX_SYNC

		config SCSI_NCR53C8XX_NO_DISCONNECT
		bool "not allow targets to disconnect"
		depends on (SCSI_ZALON \|\| SCSI_NCR_Q720) && SCSI_NCR53C8XX_DEFAULT_TAGS=0
		depends on SCSI_ZALON && SCSI_NCR53C8XX_DEFAULT_TAGS=0
		help
		This option is only provided for safety if you suspect some SCSI
		device of yours to not support properly the target-disconnect

drivers/scsi/Makefile

+0 −2

Original line number	Diff line number	Diff line
		@@ -76,7 +76,6 @@ obj-$(CONFIG_SCSI_PM8001) += pm8001/
		obj-$(CONFIG_SCSI_ISCI) += isci/
		obj-$(CONFIG_SCSI_IPS) += ips.o
		obj-$(CONFIG_SCSI_GENERIC_NCR5380) += g_NCR5380.o
		obj-$(CONFIG_SCSI_NCR_Q720) += NCR_Q720_mod.o
		obj-$(CONFIG_SCSI_QLOGIC_FAS) += qlogicfas408.o qlogicfas.o
		obj-$(CONFIG_PCMCIA_QLOGIC) += qlogicfas408.o
		obj-$(CONFIG_SCSI_QLOGIC_1280) += qla1280.o
		@@ -179,7 +178,6 @@ ncr53c8xx-flags-$(CONFIG_SCSI_ZALON) \
		-DCONFIG_SCSI_NCR53C8XX_NO_WORD_TRANSFERS
		CFLAGS_ncr53c8xx.o := $(ncr53c8xx-flags-y) $(ncr53c8xx-flags-m)
		zalon7xx-objs := zalon.o ncr53c8xx.o
		NCR_Q720_mod-objs := NCR_Q720.o ncr53c8xx.o

		# Files generated that shall be removed upon make clean
		clean-files := 53c700_d.h 53c700_u.h scsi_devinfo_tbl.c

drivers/scsi/NCR_Q720.c

deleted100644 → 0

+0 −376

Original line number	Diff line number	Diff line
		/* -- mode: c; c-basic-offset: 8 -- */

		/* NCR Quad 720 MCA SCSI Driver
		*
		* Copyright (C) 2003 by James.Bottomley@HansenPartnership.com
		*/

		#include <linux/blkdev.h>
		#include <linux/interrupt.h>
		#include <linux/kernel.h>
		#include <linux/module.h>
		#include <linux/mca.h>
		#include <linux/slab.h>
		#include <linux/types.h>
		#include <linux/init.h>
		#include <linux/delay.h>
		#include <asm/io.h>

		#include "scsi.h"
		#include <scsi/scsi_host.h>

		#include "ncr53c8xx.h"

		#include "NCR_Q720.h"

		static struct ncr_chip q720_chip __initdata = {
		.revision_id = 0x0f,
		.burst_max = 3,
		.offset_max = 8,
		.nr_divisor = 4,
		.features = FE_WIDE \| FE_DIFF \| FE_VARCLK,
		};

		MODULE_AUTHOR("James Bottomley");
		MODULE_DESCRIPTION("NCR Quad 720 SCSI Driver");
		MODULE_LICENSE("GPL");

		#define NCR_Q720_VERSION "0.9"

		/* We needs this helper because we have up to four hosts per struct device */
		struct NCR_Q720_private {
		struct device *dev;
		void __iomem * mem_base;
		__u32 phys_mem_base;
		__u32 mem_size;
		__u8 irq;
		__u8 siops;
		__u8 irq_enable;
		struct Scsi_Host *hosts[4];
		};

		static struct scsi_host_template NCR_Q720_tpnt = {
		.module = THIS_MODULE,
		.proc_name = "NCR_Q720",
		};

		static irqreturn_t
		NCR_Q720_intr(int irq, void *data)
		{
		struct NCR_Q720_private p = (struct NCR_Q720_private )data;
		__u8 sir = (readb(p->mem_base + 0x0d) & 0xf0) >> 4;
		__u8 siop;

		sir \|= ~p->irq_enable;

		if(sir == 0xff)
		return IRQ_NONE;


		while((siop = ffz(sir)) < p->siops) {
		sir \|= 1<<siop;
		ncr53c8xx_intr(irq, p->hosts[siop]);
		}
		return IRQ_HANDLED;
		}

		static int __init
		NCR_Q720_probe_one(struct NCR_Q720_private *p, int siop,
		int irq, int slot, __u32 paddr, void __iomem *vaddr)
		{
		struct ncr_device device;
		__u8 scsi_id;
		static int unit = 0;
		__u8 scsr1 = readb(vaddr + NCR_Q720_SCSR_OFFSET + 1);
		__u8 differential = readb(vaddr + NCR_Q720_SCSR_OFFSET) & 0x20;
		__u8 version;
		int error;

		scsi_id = scsr1 >> 4;
		/* enable burst length 16 (FIXME: should allow this) */
		scsr1 \|= 0x02;
		/* force a siop reset */
		scsr1 \|= 0x04;
		writeb(scsr1, vaddr + NCR_Q720_SCSR_OFFSET + 1);
		udelay(10);
		version = readb(vaddr + 0x18) >> 4;

		memset(&device, 0, sizeof(struct ncr_device));
		/* Initialise ncr_device structure with items required by ncr_attach. */
		device.chip = q720_chip;
		device.chip.revision_id = version;
		device.host_id = scsi_id;
		device.dev = p->dev;
		device.slot.base = paddr;
		device.slot.base_c = paddr;
		device.slot.base_v = vaddr;
		device.slot.irq = irq;
		device.differential = differential ? 2 : 0;
		printk("Q720 probe unit %d (siop%d) at 0x%lx, diff = %d, vers = %d\n", unit, siop,
		(unsigned long)paddr, differential, version);

		p->hosts[siop] = ncr_attach(&NCR_Q720_tpnt, unit++, &device);

		if (!p->hosts[siop])
		goto fail;

		p->irq_enable \|= (1<<siop);
		scsr1 = readb(vaddr + NCR_Q720_SCSR_OFFSET + 1);
		/* clear the disable interrupt bit */
		scsr1 &= ~0x01;
		writeb(scsr1, vaddr + NCR_Q720_SCSR_OFFSET + 1);

		error = scsi_add_host(p->hosts[siop], p->dev);
		if (error)
		ncr53c8xx_release(p->hosts[siop]);
		else
		scsi_scan_host(p->hosts[siop]);
		return error;

		fail:
		return -ENODEV;
		}

		/* Detect a Q720 card. Note, because of the setup --- the chips are
		* essentially connectecd to the MCA bus independently, it is easier
		* to set them up as two separate host adapters, rather than one
		* adapter with two channels */
		static int __init
		NCR_Q720_probe(struct device *dev)
		{
		struct NCR_Q720_private *p;
		static int banner = 1;
		struct mca_device *mca_dev = to_mca_device(dev);
		int slot = mca_dev->slot;
		int found = 0;
		int irq, i, siops;
		__u8 pos2, pos4, asr2, asr9, asr10;
		__u16 io_base;
		__u32 base_addr, mem_size;
		void __iomem *mem_base;

		p = kzalloc(sizeof(*p), GFP_KERNEL);
		if (!p)
		return -ENOMEM;

		pos2 = mca_device_read_pos(mca_dev, 2);
		/* enable device */
		pos2 \|= NCR_Q720_POS2_BOARD_ENABLE \| NCR_Q720_POS2_INTERRUPT_ENABLE;
		mca_device_write_pos(mca_dev, 2, pos2);

		io_base = (pos2 & NCR_Q720_POS2_IO_MASK) << NCR_Q720_POS2_IO_SHIFT;


		if(banner) {
		printk(KERN_NOTICE "NCR Q720: Driver Version " NCR_Q720_VERSION "\n"
		"NCR Q720: Copyright (c) 2003 by James.Bottomley@HansenPartnership.com\n"
		"NCR Q720:\n");
		banner = 0;
		}
		io_base = mca_device_transform_ioport(mca_dev, io_base);

		/* OK, this is phase one of the bootstrap, we now know the
		* I/O space base address. All the configuration registers
		* are mapped here (including pos) */

		/* sanity check I/O mapping */
		i = inb(io_base) \| (inb(io_base+1)<<8);
		if(i != NCR_Q720_MCA_ID) {
		printk(KERN_ERR "NCR_Q720, adapter failed to I/O map registers correctly at 0x%x(0x%x)\n", io_base, i);
		kfree(p);
		return -ENODEV;
		}

		/* Phase II, find the ram base and memory map the board register */
		pos4 = inb(io_base + 4);
		/* enable streaming data */
		pos4 \|= 0x01;
		outb(pos4, io_base + 4);
		base_addr = (pos4 & 0x7e) << 20;
		base_addr += (pos4 & 0x80) << 23;
		asr10 = inb(io_base + 0x12);
		base_addr += (asr10 & 0x80) << 24;
		base_addr += (asr10 & 0x70) << 23;

		/* OK, got the base addr, now we need to find the ram size,
		* enable and map it */
		asr9 = inb(io_base + 0x11);
		i = (asr9 & 0xc0) >> 6;
		if(i == 0)
		mem_size = 1024;
		else
		mem_size = 1 << (19 + i);

		/* enable the sram mapping */
		asr9 \|= 0x20;

		/* disable the rom mapping */
		asr9 &= ~0x10;

		outb(asr9, io_base + 0x11);

		if(!request_mem_region(base_addr, mem_size, "NCR_Q720")) {
		printk(KERN_ERR "NCR_Q720: Failed to claim memory region 0x%lx\n-0x%lx",
		(unsigned long)base_addr,
		(unsigned long)(base_addr + mem_size));
		goto out_free;
		}

		if (dma_declare_coherent_memory(dev, base_addr, base_addr,
		mem_size, 0)) {
		printk(KERN_ERR "NCR_Q720: DMA declare memory failed\n");
		goto out_release_region;
		}

		/* The first 1k of the memory buffer is a memory map of the registers
		*/
		mem_base = dma_mark_declared_memory_occupied(dev, base_addr,
		1024);
		if (IS_ERR(mem_base)) {
		printk("NCR_Q720 failed to reserve memory mapped region\n");
		goto out_release;
		}

		/* now also enable accesses in asr 2 */
		asr2 = inb(io_base + 0x0a);

		asr2 \|= 0x01;

		outb(asr2, io_base + 0x0a);

		/* get the number of SIOPs (this should be 2 or 4) */
		siops = ((asr2 & 0xe0) >> 5) + 1;

		/* sanity check mapping (again) */
		i = readw(mem_base);
		if(i != NCR_Q720_MCA_ID) {
		printk(KERN_ERR "NCR_Q720, adapter failed to memory map registers correctly at 0x%lx(0x%x)\n", (unsigned long)base_addr, i);
		goto out_release;
		}

		irq = readb(mem_base + 5) & 0x0f;


		/* now do the bus related transforms */
		irq = mca_device_transform_irq(mca_dev, irq);

		printk(KERN_NOTICE "NCR Q720: found in slot %d irq = %d mem base = 0x%lx siops = %d\n", slot, irq, (unsigned long)base_addr, siops);
		printk(KERN_NOTICE "NCR Q720: On board ram %dk\n", mem_size/1024);

		p->dev = dev;
		p->mem_base = mem_base;
		p->phys_mem_base = base_addr;
		p->mem_size = mem_size;
		p->irq = irq;
		p->siops = siops;

		if (request_irq(irq, NCR_Q720_intr, IRQF_SHARED, "NCR_Q720", p)) {
		printk(KERN_ERR "NCR_Q720: request irq %d failed\n", irq);
		goto out_release;
		}
		/* disable all the siop interrupts */
		for(i = 0; i < siops; i++) {
		void __iomem *reg_scsr1 = mem_base + NCR_Q720_CHIP_REGISTER_OFFSET
		+ i*NCR_Q720_SIOP_SHIFT + NCR_Q720_SCSR_OFFSET + 1;
		__u8 scsr1 = readb(reg_scsr1);
		scsr1 \|= 0x01;
		writeb(scsr1, reg_scsr1);
		}

		/* plumb in all 720 chips */
		for (i = 0; i < siops; i++) {
		void __iomem *siop_v_base = mem_base + NCR_Q720_CHIP_REGISTER_OFFSET
		+ i*NCR_Q720_SIOP_SHIFT;
		__u32 siop_p_base = base_addr + NCR_Q720_CHIP_REGISTER_OFFSET
		+ i*NCR_Q720_SIOP_SHIFT;
		__u16 port = io_base + NCR_Q720_CHIP_REGISTER_OFFSET
		+ i*NCR_Q720_SIOP_SHIFT;
		int err;

		outb(0xff, port + 0x40);
		outb(0x07, port + 0x41);
		if ((err = NCR_Q720_probe_one(p, i, irq, slot,
		siop_p_base, siop_v_base)) != 0)
		printk("Q720: SIOP%d: probe failed, error = %d\n",
		i, err);
		else
		found++;
		}

		if (!found) {
		kfree(p);
		return -ENODEV;
		}

		mca_device_set_claim(mca_dev, 1);
		mca_device_set_name(mca_dev, "NCR_Q720");
		dev_set_drvdata(dev, p);

		return 0;

		out_release:
		dma_release_declared_memory(dev);
		out_release_region:
		release_mem_region(base_addr, mem_size);
		out_free:
		kfree(p);

		return -ENODEV;
		}

		static void __exit
		NCR_Q720_remove_one(struct Scsi_Host *host)
		{
		scsi_remove_host(host);
		ncr53c8xx_release(host);
		}

		static int __exit
		NCR_Q720_remove(struct device *dev)
		{
		struct NCR_Q720_private *p = dev_get_drvdata(dev);
		int i;

		for (i = 0; i < p->siops; i++)
		if(p->hosts[i])
		NCR_Q720_remove_one(p->hosts[i]);

		dma_release_declared_memory(dev);
		release_mem_region(p->phys_mem_base, p->mem_size);
		free_irq(p->irq, p);
		kfree(p);
		return 0;
		}

		static short NCR_Q720_id_table[] = { NCR_Q720_MCA_ID, 0 };

		static struct mca_driver NCR_Q720_driver = {
		.id_table = NCR_Q720_id_table,
		.driver = {
		.name = "NCR_Q720",
		.bus = &mca_bus_type,
		.probe = NCR_Q720_probe,
		.remove = NCR_Q720_remove,
		},
		};

		static int __init
		NCR_Q720_init(void)
		{
		int ret = ncr53c8xx_init();
		if (!ret)
		ret = mca_register_driver(&NCR_Q720_driver);
		if (ret)
		ncr53c8xx_exit();
		return ret;
		}

		static void __exit
		NCR_Q720_exit(void)
		{
		mca_unregister_driver(&NCR_Q720_driver);
		ncr53c8xx_exit();
		}

		module_init(NCR_Q720_init);
		module_exit(NCR_Q720_exit);

drivers/scsi/NCR_Q720.h

deleted100644 → 0

+0 −29

Original line number	Diff line number	Diff line
		/* SPDX-License-Identifier: GPL-2.0 */
		/* -- mode: c; c-basic-offset: 8 -- */

		/* NCR Quad 720 MCA SCSI Driver
		*
		* Copyright (C) 2003 by James.Bottomley@HansenPartnership.com
		*/

		#ifndef _NCR_Q720_H
		#define _NCR_Q720_H

		/* The MCA identifier */
		#define NCR_Q720_MCA_ID 0x0720

		#define NCR_Q720_CLOCK_MHZ 30

		#define NCR_Q720_POS2_BOARD_ENABLE 0x01
		#define NCR_Q720_POS2_INTERRUPT_ENABLE 0x02
		#define NCR_Q720_POS2_PARITY_DISABLE 0x04
		#define NCR_Q720_POS2_IO_MASK 0xf8
		#define NCR_Q720_POS2_IO_SHIFT 8

		#define NCR_Q720_CHIP_REGISTER_OFFSET 0x200
		#define NCR_Q720_SCSR_OFFSET 0x070
		#define NCR_Q720_SIOP_SHIFT 0x080

		#endif

Admin message