ARM: dts: sun5i: Add dts file for the Wobo i5 top set box

	sun5i-a10s-mk802.dtb \

	sun5i-a10s-olinuxino-micro.dtb \

	sun5i-a10s-r7-tv-dongle.dtb \

	sun5i-a10s-wobo-i5.dtb \

	sun5i-a13-hsg-h702.dtb \

	sun5i-a13-inet-98v-rev2.dtb \

	sun5i-a13-olinuxino.dtb \

/*

 * Copyright 2015 Jelle van der Waa <jelle@vdwaa.nl>

 *

 * This file is dual-licensed: you can use it either under the terms

 * of the GPL or the X11 license, at your option. Note that this dual

 * licensing only applies to this file, and not this project as a

 * whole.

 *

 *  a) This file is free software; you can redistribute it and/or

 *     modify it under the terms of the GNU General Public License as

 *     published by the Free Software Foundation; either version 2 of the

 *     License, or (at your option) any later version.

 *

 *     This file is distributed in the hope that it will be useful,

 *     but WITHOUT ANY WARRANTY; without even the implied warranty of

 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 *     GNU General Public License for more details.

 *

 * Or, alternatively,

 *

 *  b) Permission is hereby granted, free of charge, to any person

 *     obtaining a copy of this software and associated documentation

 *     files (the "Software"), to deal in the Software without

 *     restriction, including without limitation the rights to use,

 *     copy, modify, merge, publish, distribute, sublicense, and/or

 *     sell copies of the Software, and to permit persons to whom the

 *     Software is furnished to do so, subject to the following

 *     conditions:

 *

 *     The above copyright notice and this permission notice shall be

 *     included in all copies or substantial portions of the Software.

 *

 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,

 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES

 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND

 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT

 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,

 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING

 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR

 *     OTHER DEALINGS IN THE SOFTWARE.

 */

/dts-v1/;

#include "sun5i-a10s.dtsi"

#include "sunxi-common-regulators.dtsi"

#include <dt-bindings/gpio/gpio.h>

#include <dt-bindings/interrupt-controller/irq.h>

#include <dt-bindings/pinctrl/sun4i-a10.h>

/ {

	model = "A10s-Wobo i5";

	compatible = "wobo,a10s-wobo-i5", "allwinner,sun5i-a10s";

	aliases {

		serial0 = &uart0;

	};

	chosen {

		stdout-path = "serial0:115200n8";

	};

	leds {

		compatible = "gpio-leds";

		pinctrl-names = "default";

		pinctrl-0 = <&led_pins_wobo_i5>;

		blue {

			label = "a10s-wobo-i5:blue:usr";

			gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>;

			default-state = "on";

		};

	};

	reg_emac_3v3: emac-3v3 {

		compatible = "regulator-fixed";

		pinctrl-names = "default";

		pinctrl-0 = <&emac_power_pin_wobo>;

		regulator-name = "emac-3v3";

		regulator-min-microvolt = <3300000>;

		regulator-max-microvolt = <3300000>;

		enable-active-high;

		gpio = <&pio 0 2 GPIO_ACTIVE_HIGH>;

	};

};

&cpu0 {

	cpu-supply = <&reg_dcdc2>;

};

&ehci0 {

	status = "okay";

};

&emac {

	pinctrl-names = "default";

	pinctrl-0 = <&emac_pins_b>;

	phy = <&phy1>;

	status = "okay";

};

&emac_sram {

	status = "okay";

};

&i2c0 {

	pinctrl-names = "default";

	pinctrl-0 = <&i2c0_pins_a>;

	status = "okay";

	axp209: pmic@34 {

		reg = <0x34>;

		interrupts = <0>;

	};

};

#include "axp209.dtsi"

&mdio {

	phy-supply = <&reg_emac_3v3>;

	status = "okay";

	phy1: ethernet-phy@1 {

		reg = <1>;

	};

};

&mmc0 {

	pinctrl-names = "default";

	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_wobo_i5>;

	vmmc-supply = <&reg_vcc3v3>;

	bus-width = <4>;

	cd-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */

	cd-inverted;

	status = "okay";

};

&ohci0 {

	status = "okay";

};

&otg_sram {

	status = "okay";

};

&pio {

	led_pins_wobo_i5: led_pins@0 {

		allwinner,pins = "PB2";

		allwinner,function = "gpio_out";

		allwinner,drive = <SUN4I_PINCTRL_10_MA>;

		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;

	};

	mmc0_cd_pin_wobo_i5: mmc0_cd_pin@0 {

		allwinner,pins = "PB3";

		allwinner,function = "gpio_in";

		allwinner,drive = <SUN4I_PINCTRL_10_MA>;

		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;

	};

	emac_power_pin_wobo: emac_power_pin@0 {

		allwinner,pins = "PA02";

		allwinner,function = "gpio_out";

		allwinner,drive = <SUN4I_PINCTRL_10_MA>;

		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;

	};

};

&reg_dcdc2 {

	regulator-always-on;

	regulator-min-microvolt = <1000000>;

	regulator-max-microvolt = <1400000>;

	regulator-name = "vdd-cpu";

};

&reg_dcdc3 {

	regulator-always-on;

	regulator-min-microvolt = <1250000>;

	regulator-max-microvolt = <1250000>;

	regulator-name = "vdd-int-dll";

};

&reg_ldo1 {

	regulator-name = "vdd-rtc";

};

&reg_ldo2 {

	regulator-always-on;

	regulator-min-microvolt = <3000000>;

	regulator-max-microvolt = <3000000>;

	regulator-name = "avcc";

};

&reg_ldo3 {

	regulator-always-on;

	regulator-min-microvolt = <3300000>;

	regulator-max-microvolt = <3300000>;

	regulator-name = "vcc-wifi";

};

&reg_usb1_vbus {

	gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>;

	status = "okay";

};

&uart0 {

	pinctrl-names = "default";

	pinctrl-0 = <&uart0_pins_a>;

	status = "okay";

};

&usb_otg {

	dr_mode = "host";

	status = "okay";

};

&usb1_vbus_pin_a {

	allwinner,pins = "PG12";

};

&usbphy {

	usb1_vbus-supply = <&reg_usb1_vbus>;

	status = "okay";

};