Commit ade2daf9 authored by Bartlomiej Zolnierkiewicz's avatar Bartlomiej Zolnierkiewicz
Browse files

ide: make remaining built-in only IDE host drivers modular (take 2) 



* Make remaining built-in only IDE host drivers modular, add ide-scan-pci.c
  file for probing PCI host drivers registered with IDE core (special case
  for built-in IDE and CONFIG_IDEPCI_PCIBUS_ORDER=y) and then take care of
  the ordering in which all IDE host drivers are probed when IDE is built-in
  during link time.

* Move probing of gayle, falconide, macide, q40ide and buddha (m68k arch
  specific) host drivers, before PCI ones (no PCI on m68k), ide-cris (cris
  arch specific), cmd640 (x86 arch specific) and pmac (ppc arch specific).

* Move probing of ide-cris (cris arch specific) host driver before cmd640
  (x86 arch specific).

* Move probing of mpc8xx (ppc specific) host driver before ide-pnp (depends
  on ISA and none of ppc platform that use mpc8xx supports ISA) and ide-h8300
  (h8300 arch specific).

* Add "probe_vlb" kernel parameter to cmd640 host driver and update
  Documentation/ide.txt accordingly.

* Make IDE_ARM config option visible so it can also be disabled if needed.

* Remove bogus comment from ide.c while at it.

v2:
* Fix two issues spotted by Sergei:
  - replace ENOMEM error value by ENOENT in ide-h8300 host driver
  - fix MODULE_PARM_DESC() in cmd640 host driver

Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: default avatarBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
parent 8ac4ce74

Documentation/ide.txt

+5 −4
Original line number Diff line number Diff line
@@ -30,7 +30,7 @@ 
***

***  The CMD640 is also used on some Vesa Local Bus (VLB) cards, and is *NOT*

***  automatically detected by Linux.  For safe, reliable operation with such

***  interfaces, one *MUST* use the "ide0=cmd640_vlb" kernel option.

***  interfaces, one *MUST* use the "cmd640.probe_vlb" kernel option.

***

***  Use of the "serialize" option is no longer necessary.
@@ -292,9 +292,6 @@ The following are valid ONLY on ide0, which usually corresponds 
to the first ATA interface found on the particular host, and the defaults for

the base,ctl ports must not be altered.



 "ide0=cmd640_vlb"	: *REQUIRED* for VLB cards with the CMD640 chip

			  (not for PCI -- automatically detected)



 "ide=doubler"		: probe/support IDE doublers on Amiga



There may be more options than shown -- use the source, Luke!
@@ -310,6 +307,10 @@ i.e. to enable probing for ALI M14xx chipsets (ali14xx host driver) use: 
* "probe" module parameter when ali14xx driver is compiled as module

  ("modprobe ali14xx probe")



Also for legacy CMD640 host driver (cmd640) you need to use "probe_vlb"

kernel paremeter to enable probing for VLB version of the chipset (PCI ones

are detected automatically).



================================================================================



IDE ATAPI streaming tape driver

drivers/ide/Kconfig

+14 −12
Original line number Diff line number Diff line
@@ -325,7 +325,7 @@ config BLK_DEV_PLATFORM 
	  If unsure, say N.



config BLK_DEV_CMD640

	bool "CMD640 chipset bugfix/support"

	tristate "CMD640 chipset bugfix/support"

	depends on X86

	---help---

	  The CMD-Technologies CMD640 IDE chip is used on many common 486 and
@@ -359,7 +359,7 @@ config BLK_DEV_CMD640_ENHANCED 
	  Otherwise say N.



config BLK_DEV_IDEPNP

	bool "PNP EIDE support"

	tristate "PNP EIDE support"

	depends on PNP

	help

	  If you have a PnP (Plug and Play) compatible EIDE card and
@@ -788,7 +788,7 @@ config BLK_DEV_CELLEB 
endif



config BLK_DEV_IDE_PMAC

	bool "Builtin PowerMac IDE support"

	tristate "Builtin PowerMac IDE support"

	depends on PPC_PMAC && IDE=y && BLK_DEV_IDE=y

	help

	  This driver provides support for the built-in IDE controller on
@@ -842,7 +842,9 @@ config BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ 
       depends on BLK_DEV_IDE_AU1XXX



config IDE_ARM

	def_bool ARM && (ARCH_CLPS7500 || ARCH_RPC || ARCH_SHARK)

	tristate "ARM IDE support"

	depends on ARM && (ARCH_CLPS7500 || ARCH_RPC || ARCH_SHARK)

	default y



config BLK_DEV_IDE_ICSIDE

	tristate "ICS IDE interface support"
@@ -874,7 +876,7 @@ config BLK_DEV_IDE_BAST 
	  Simtec BAST or the Thorcom VR1000



config ETRAX_IDE

	bool "ETRAX IDE support"

	tristate "ETRAX IDE support"

	depends on CRIS && BROKEN

	select BLK_DEV_IDEDMA

	help
@@ -908,14 +910,14 @@ config ETRAX_IDE_G27_RESET 
endchoice



config IDE_H8300

	bool "H8300 IDE support"

	tristate "H8300 IDE support"

	depends on H8300

	default y

	help

	  Enables the H8300 IDE driver.



config BLK_DEV_GAYLE

	bool "Amiga Gayle IDE interface support"

	tristate "Amiga Gayle IDE interface support"

	depends on AMIGA

	help

	  This is the IDE driver for the Amiga Gayle IDE interface. It supports
@@ -946,7 +948,7 @@ config BLK_DEV_IDEDOUBLER 
	  runtime using the "ide=doubler" kernel boot parameter.



config BLK_DEV_BUDDHA

	bool "Buddha/Catweasel/X-Surf IDE interface support (EXPERIMENTAL)"

	tristate "Buddha/Catweasel/X-Surf IDE interface support (EXPERIMENTAL)"

	depends on ZORRO && EXPERIMENTAL

	help

	  This is the IDE driver for the IDE interfaces on the Buddha,
@@ -958,7 +960,7 @@ config BLK_DEV_BUDDHA 
	  to one of its IDE interfaces.



config BLK_DEV_FALCON_IDE

	bool "Falcon IDE interface support"

	tristate "Falcon IDE interface support"

	depends on ATARI

	help

	  This is the IDE driver for the builtin IDE interface on the Atari
@@ -967,7 +969,7 @@ config BLK_DEV_FALCON_IDE 
	  interface.



config BLK_DEV_MAC_IDE

	bool "Macintosh Quadra/Powerbook IDE interface support"

	tristate "Macintosh Quadra/Powerbook IDE interface support"

	depends on MAC

	help

	  This is the IDE driver for the builtin IDE interface on some m68k
@@ -980,7 +982,7 @@ config BLK_DEV_MAC_IDE 
	  builtin IDE interface.



config BLK_DEV_Q40IDE

	bool "Q40/Q60 IDE interface support"

	tristate "Q40/Q60 IDE interface support"

	depends on Q40

	help

	  Enable the on-board IDE controller in the Q40/Q60.  This should
@@ -988,7 +990,7 @@ config BLK_DEV_Q40IDE 
	  drive subsystem through an expansion card.



config BLK_DEV_MPC8xx_IDE

	bool "MPC8xx IDE support"

	tristate "MPC8xx IDE support"

	depends on 8xx && (LWMON || IVMS8 || IVML24 || TQM8xxL) && IDE=y && BLK_DEV_IDE=y && !PPC_MERGE

	help

	  This option provides support for IDE on Motorola MPC8xx Systems.

drivers/ide/Makefile

+34 −24
Original line number Diff line number Diff line
@@ -7,41 +7,37 @@ 
# Note : at this point, these files are compiled on all systems.

# In the future, some of these should be built conditionally.

#

# First come modules that register themselves with the core

# link order is important here



EXTRA_CFLAGS				+= -Idrivers/ide



obj-$(CONFIG_BLK_DEV_IDE)		+= pci/



ide-core-y += ide.o ide-io.o ide-iops.o ide-lib.o ide-probe.o ide-taskfile.o



ide-core-$(CONFIG_BLK_DEV_CMD640)	+= pci/cmd640.o



# Core IDE code - must come before legacy

# core IDE code

ide-core-$(CONFIG_BLK_DEV_IDEPCI)	+= setup-pci.o

ide-core-$(CONFIG_BLK_DEV_IDEDMA)	+= ide-dma.o

ide-core-$(CONFIG_IDE_PROC_FS)		+= ide-proc.o

ide-core-$(CONFIG_BLK_DEV_IDEPNP)	+= ide-pnp.o

ide-core-$(CONFIG_BLK_DEV_IDEACPI)	+= ide-acpi.o



# built-in only drivers from arm/

ide-core-$(CONFIG_IDE_ARM)		+= arm/ide_arm.o

obj-$(CONFIG_BLK_DEV_IDE)		+= ide-core.o



# built-in only drivers from legacy/

ide-core-$(CONFIG_BLK_DEV_BUDDHA)	+= legacy/buddha.o

ide-core-$(CONFIG_BLK_DEV_FALCON_IDE)	+= legacy/falconide.o

ide-core-$(CONFIG_BLK_DEV_GAYLE)	+= legacy/gayle.o

ide-core-$(CONFIG_BLK_DEV_MAC_IDE)	+= legacy/macide.o

ide-core-$(CONFIG_BLK_DEV_Q40IDE)	+= legacy/q40ide.o

ifeq ($(CONFIG_IDE_ARM), y)

	ide-arm-core-y += arm/ide_arm.o

	obj-y += ide-arm-core.o

endif



# built-in only drivers from ppc/

ide-core-$(CONFIG_BLK_DEV_MPC8xx_IDE)	+= ppc/mpc8xx.o

ide-core-$(CONFIG_BLK_DEV_IDE_PMAC)	+= ppc/pmac.o

obj-$(CONFIG_BLK_DEV_IDE)		+= legacy/ pci/



# built-in only drivers from h8300/

ide-core-$(CONFIG_IDE_H8300)		+= h8300/ide-h8300.o

obj-$(CONFIG_IDEPCI_PCIBUS_ORDER)	+= ide-scan-pci.o



obj-$(CONFIG_BLK_DEV_IDE)		+= ide-core.o

ifeq ($(CONFIG_BLK_DEV_CMD640), y)

	cmd640-core-y += pci/cmd640.o

	obj-y += cmd640-core.o

endif



obj-$(CONFIG_BLK_DEV_IDE)		+= cris/ ppc/

obj-$(CONFIG_BLK_DEV_IDEPNP)		+= ide-pnp.o

obj-$(CONFIG_IDE_H8300)			+= h8300/

obj-$(CONFIG_IDE_GENERIC)		+= ide-generic.o



obj-$(CONFIG_BLK_DEV_IDEDISK)		+= ide-disk.o
@@ -49,6 +45,20 @@ obj-$(CONFIG_BLK_DEV_IDECD) += ide-cd.o 
obj-$(CONFIG_BLK_DEV_IDETAPE)		+= ide-tape.o

obj-$(CONFIG_BLK_DEV_IDEFLOPPY)		+= ide-floppy.o



obj-$(CONFIG_BLK_DEV_IDE)		+= legacy/ arm/ mips/

obj-$(CONFIG_BLK_DEV_HD)		+= legacy/

obj-$(CONFIG_ETRAX_IDE)		+= cris/
 
ifeq ($(CONFIG_BLK_DEV_IDECS), y)

	ide-cs-core-y += legacy/ide-cs.o

	obj-y += ide-cs-core.o

endif



ifeq ($(CONFIG_BLK_DEV_PLATFORM), y)

	ide-platform-core-y += legacy/ide_platform.o

	obj-y += ide-platform-core.o

endif



obj-$(CONFIG_BLK_DEV_IDE)		+= arm/ mips/



# old hd driver must be last

ifeq ($(CONFIG_BLK_DEV_HD), y)

	hd-core-y += legacy/hd.o

	obj-y += hd-core.o

endif

drivers/ide/arm/Makefile

+4 −0
Original line number Diff line number Diff line
@@ -3,4 +3,8 @@ obj-$(CONFIG_BLK_DEV_IDE_ICSIDE) += icside.o 
obj-$(CONFIG_BLK_DEV_IDE_RAPIDE)	+= rapide.o

obj-$(CONFIG_BLK_DEV_IDE_BAST)		+= bast-ide.o



ifeq ($(CONFIG_IDE_ARM), m)

	obj-m += ide_arm.o

endif



EXTRA_CFLAGS	:= -Idrivers/ide

drivers/ide/arm/ide_arm.c

+5 −1
Original line number Diff line number Diff line
@@ -24,7 +24,7 @@ 
# define IDE_ARM_IRQ	IRQ_HARDDISK

#endif



void __init ide_arm_init(void)

static int __init ide_arm_init(void)

{

	ide_hwif_t *hwif;

	hw_regs_t hw;
@@ -41,4 +41,8 @@ void __init ide_arm_init(void) 


		ide_device_add(idx);

	}



	return 0;

}



module_init(ide_arm_init);

CRA Git | Maintained and supported by SUSTech CRA and CCSE