Commit ad8d3948 authored by Eilon Greenstein's avatar Eilon Greenstein Committed by David S. Miller
Browse files

bnx2x: New init infrastructure 



This new initialization code supports the 57711 HW. It also supports
the emulation and FPGA for the 57711 and 57710 initializations values
(very small amount of code which is very helpful in the lab - less
than 30 lines).

The initialization is done via DMAE after the DMAE block is ready -
before it is ready, some of the initialization is done via PCI
configuration transactions (referred to as indirect write).  A mutex
to protect the DMAE from being overlapped was added.  There are few
new registers which needs to be initialized by SW - the full comment
for those registers is added to the register file.  A place holder for
the 57711 (referred to as E1H) microcode was added- the microcode
itself is too big and it is split over the following 4 patches

Signed-off-by: default avatarEilon Greenstein <eilong@broadcom.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent c18487ee

drivers/net/bnx2x.h

+74 −25
Original line number Diff line number Diff line
@@ -559,23 +559,35 @@ struct bnx2x { 


	u32			chip_id;

/* chip num:16-31, rev:12-15, metal:4-11, bond_id:0-3 */

#define CHIP_ID(bp)     		(((bp)->chip_id) & 0xfffffff0)

#define CHIP_ID(bp)			(bp->chip_id & 0xfffffff0)



#define CHIP_NUM(bp)			(bp->chip_id >> 16)

#define CHIP_NUM_57710			0x164e

#define CHIP_NUM_57711			0x164f

#define CHIP_NUM_57711E			0x1650

#define CHIP_IS_E1(bp)			(CHIP_NUM(bp) == CHIP_NUM_57710)

#define CHIP_IS_57711(bp)		(CHIP_NUM(bp) == CHIP_NUM_57711)

#define CHIP_IS_57711E(bp)		(CHIP_NUM(bp) == CHIP_NUM_57711E)

#define CHIP_IS_E1H(bp)			(CHIP_IS_57711(bp) || \

					 CHIP_IS_57711E(bp))

#define IS_E1H_OFFSET			CHIP_IS_E1H(bp)



#define CHIP_REV(bp)			(bp->chip_id & 0x0000f000)

#define CHIP_REV_Ax			0x00000000

/* assume maximum 5 revisions */

#define CHIP_REV_IS_SLOW(bp)		(CHIP_REV(bp) > 0x00005000)

/* Emul versions are A=>0xe, B=>0xc, C=>0xa, D=>8, E=>6 */

#define CHIP_REV_IS_EMUL(bp)		((CHIP_REV_IS_SLOW(bp)) && \

					 !(CHIP_REV(bp) & 0x00001000))

/* FPGA versions are A=>0xf, B=>0xd, C=>0xb, D=>9, E=>7 */

#define CHIP_REV_IS_FPGA(bp)		((CHIP_REV_IS_SLOW(bp)) && \

					 (CHIP_REV(bp) & 0x00001000))



#define CHIP_NUM(bp)    		(((bp)->chip_id) & 0xffff0000)

#define CHIP_TIME(bp)			((CHIP_REV_IS_EMUL(bp)) ? 2000 : \

					((CHIP_REV_IS_FPGA(bp)) ? 200 : 1))



#define CHIP_REV(bp)    		(((bp)->chip_id) & 0x0000f000)

#define CHIP_REV_Ax     		0x00000000

#define CHIP_REV_Bx     		0x00001000

#define CHIP_REV_Cx     		0x00002000

#define CHIP_REV_EMUL   		0x0000e000

#define CHIP_REV_FPGA   		0x0000f000

#define CHIP_REV_IS_SLOW(bp)    	((CHIP_REV(bp) == CHIP_REV_EMUL) || \

					 (CHIP_REV(bp) == CHIP_REV_FPGA))

#define CHIP_REV_IS_EMUL(bp)		(CHIP_REV(bp) == CHIP_REV_EMUL)

#define CHIP_REV_IS_FPGA(bp)		(CHIP_REV(bp) == CHIP_REV_FPGA)



#define CHIP_METAL(bp)  		(((bp)->chip_id) & 0x00000ff0)

#define CHIP_BOND_ID(bp)		(((bp)->chip_id) & 0x0000000f)

#define CHIP_METAL(bp)			(bp->chip_id & 0x00000ff0)

#define CHIP_BOND_ID(bp)		(bp->chip_id & 0x0000000f)



	u16     		fw_seq;

	u16     		fw_drv_pulse_wr_seq;
@@ -678,6 +690,13 @@ struct bnx2x { 
	struct dmae_command     dmae;

	int     		executer_idx;



	int			dmae_ready;

	/* used to synchronize dmae accesses */

	struct mutex		dmae_mutex;

	struct dmae_command	init_dmae;







	u32     		old_brb_discard;

	struct bmac_stats       old_bmac;

	struct tstorm_per_client_stats old_tclient;
@@ -774,12 +793,6 @@ int bnx2x_set_gpio(struct bnx2x *bp, int gpio_num, u32 mode); 
#define STROM_ASSERT_ARRAY_SIZE 	50





#define MDIO_INDIRECT_REG_ADDR  	0x1f

#define MDIO_SET_REG_BANK(bp, reg_bank) \

		bnx2x_mdio22_write(bp, MDIO_INDIRECT_REG_ADDR, reg_bank)



#define MDIO_ACCESS_TIMEOUT     	1000





/* must be used on a CID before placing it on a HW ring */

#define HW_CID(bp, x)   		(x | (bp->port << 23))
@@ -818,6 +831,42 @@ int bnx2x_set_gpio(struct bnx2x *bp, int gpio_num, u32 mode); 
		       DPM_TRIGER_TYPE); \

	} while (0)



/* DMAE command defines */

#define DMAE_CMD_SRC_PCI		0

#define DMAE_CMD_SRC_GRC		DMAE_COMMAND_SRC



#define DMAE_CMD_DST_PCI		(1 << DMAE_COMMAND_DST_SHIFT)

#define DMAE_CMD_DST_GRC		(2 << DMAE_COMMAND_DST_SHIFT)



#define DMAE_CMD_C_DST_PCI		0

#define DMAE_CMD_C_DST_GRC		(1 << DMAE_COMMAND_C_DST_SHIFT)



#define DMAE_CMD_C_ENABLE		DMAE_COMMAND_C_TYPE_ENABLE



#define DMAE_CMD_ENDIANITY_NO_SWAP	(0 << DMAE_COMMAND_ENDIANITY_SHIFT)

#define DMAE_CMD_ENDIANITY_B_SWAP	(1 << DMAE_COMMAND_ENDIANITY_SHIFT)

#define DMAE_CMD_ENDIANITY_DW_SWAP	(2 << DMAE_COMMAND_ENDIANITY_SHIFT)

#define DMAE_CMD_ENDIANITY_B_DW_SWAP	(3 << DMAE_COMMAND_ENDIANITY_SHIFT)



#define DMAE_CMD_PORT_0			0

#define DMAE_CMD_PORT_1			DMAE_COMMAND_PORT



#define DMAE_CMD_SRC_RESET		DMAE_COMMAND_SRC_RESET

#define DMAE_CMD_DST_RESET		DMAE_COMMAND_DST_RESET

#define DMAE_CMD_E1HVN_SHIFT		DMAE_COMMAND_E1HVN_SHIFT



#define DMAE_LEN32_RD_MAX		0x80

#define DMAE_LEN32_WR_MAX		0x400



#define DMAE_COMP_VAL			0xe0d0d0ae



#define MAX_DMAE_C_PER_PORT		8

#define INIT_DMAE_C(bp)			(BP_PORT(bp)*MAX_DMAE_C_PER_PORT + \

					 BP_E1HVN(bp))

#define PMF_DMAE_C(bp)			(BP_PORT(bp)*MAX_DMAE_C_PER_PORT + \

					 E1HVN_MAX)





/* PCIE link and speed */

#define PCICFG_LINK_WIDTH		0x1f00000

#define PCICFG_LINK_WIDTH_SHIFT		20

drivers/net/bnx2x_hsi.h

+23 −4
Original line number Diff line number Diff line
@@ -522,8 +522,21 @@ struct dev_info { /* size */ 


#define FUNC_0				0

#define FUNC_1				1

#define FUNC_2				2

#define FUNC_3				3

#define FUNC_4				4

#define FUNC_5				5

#define FUNC_6				6

#define FUNC_7				7

#define E1_FUNC_MAX			2

#define FUNC_MAX			E1_FUNC_MAX

#define E1H_FUNC_MAX			8



#define VN_0				0

#define VN_1				1

#define VN_2				2

#define VN_3				3

#define E1VN_MAX			1

#define E1HVN_MAX			4





/* This value (in milliseconds) determines the frequency of the driver
@@ -747,7 +760,11 @@ struct shmem_region { /* SharedMem Offset (size) */ 
	struct mgmtfw_state	mgmtfw_state;	       /* 0x4ac     (0x1b8) */



	struct drv_port_mb	port_mb[PORT_MAX];     /* 0x664 (16*2=0x20) */

	struct drv_func_mb	func_mb[FUNC_MAX];     /* 0x684 (44*2=0x58) */

#if defined(b710)

	struct drv_func_mb	func_mb[E1_FUNC_MAX];  /* 0x684 (44*2=0x58) */

#else

	struct drv_func_mb	func_mb[E1H_FUNC_MAX];

#endif



};						       /* 0x6dc */
@@ -901,8 +918,10 @@ struct dmae_command { 
#define DMAE_COMMAND_SRC_RESET_SHIFT 13

#define DMAE_COMMAND_DST_RESET (0x1<<14)

#define DMAE_COMMAND_DST_RESET_SHIFT 14

#define DMAE_COMMAND_RESERVED0 (0x1FFFF<<15)

#define DMAE_COMMAND_RESERVED0_SHIFT 15

#define DMAE_COMMAND_E1HVN (0x3<<15)

#define DMAE_COMMAND_E1HVN_SHIFT 15

#define DMAE_COMMAND_RESERVED0 (0x7FFF<<17)

#define DMAE_COMMAND_RESERVED0_SHIFT 17

	u32 src_addr_lo;

	u32 src_addr_hi;

	u32 dst_addr_lo;

drivers/net/bnx2x_init.h

+297 −48
Original line number Diff line number Diff line
@@ -22,7 +22,8 @@ 
#define INIT_ASIC			0x4

#define INIT_HARDWARE			0x7



#define STORM_INTMEM_SIZE		(0x5800 / 4)

#define STORM_INTMEM_SIZE_E1		(0x5800 / 4)

#define STORM_INTMEM_SIZE_E1H		(0x10000 / 4)

#define TSTORM_INTMEM_ADDR		0x1a0000

#define CSTORM_INTMEM_ADDR		0x220000

#define XSTORM_INTMEM_ADDR		0x2a0000
@@ -30,7 +31,7 @@ 




/* Init operation types and structures */



/* Common for both E1 and E1H */

#define OP_RD			0x1 /* read single register */

#define OP_WR			0x2 /* write single register */

#define OP_IW			0x3 /* write single register using mailbox */
@@ -38,7 +39,37 @@ 
#define OP_SI			0x5 /* copy a string using mailbox */

#define OP_ZR			0x6 /* clear memory */

#define OP_ZP			0x7 /* unzip then copy with DMAE */

#define OP_WB			0x8 /* copy a string using DMAE */

#define OP_WR_64		0x8 /* write 64 bit pattern */

#define OP_WB			0x9 /* copy a string using DMAE */



/* Operation specific for E1 */

#define OP_RD_E1		0xa /* read single register */

#define OP_WR_E1		0xb /* write single register */

#define OP_IW_E1		0xc /* write single register using mailbox */

#define OP_SW_E1		0xd /* copy a string to the device */

#define OP_SI_E1		0xe /* copy a string using mailbox */

#define OP_ZR_E1		0xf /* clear memory */

#define OP_ZP_E1		0x10 /* unzip then copy with DMAE */

#define OP_WR_64_E1		0x11 /* write 64 bit pattern on E1 */

#define OP_WB_E1		0x12 /* copy a string using DMAE */



/* Operation specific for E1H */

#define OP_RD_E1H		0x13 /* read single register */

#define OP_WR_E1H		0x14 /* write single register */

#define OP_IW_E1H		0x15 /* write single register using mailbox */

#define OP_SW_E1H		0x16 /* copy a string to the device */

#define OP_SI_E1H		0x17 /* copy a string using mailbox */

#define OP_ZR_E1H		0x18 /* clear memory */

#define OP_ZP_E1H		0x19 /* unzip then copy with DMAE */

#define OP_WR_64_E1H		0x1a /* write 64 bit pattern on E1H */

#define OP_WB_E1H		0x1b /* copy a string using DMAE */



/* FPGA and EMUL specific operations */

#define OP_WR_EMUL_E1H		0x1c /* write single register on E1H Emul */

#define OP_WR_EMUL		0x1d /* write single register on Emulation */

#define OP_WR_FPGA		0x1e /* write single register on FPGA */

#define OP_WR_ASIC		0x1f /* write single register on ASIC */





struct raw_op {

	u32 op		:8;
@@ -117,11 +148,117 @@ static void bnx2x_init_ind_wr(struct bnx2x *bp, u32 addr, const u32 *data, 
	}

}



static void bnx2x_write_big_buf(struct bnx2x *bp, u32 addr, u32 len)

{

#ifdef USE_DMAE

	int offset = 0;



	if (bp->dmae_ready) {

		while (len > DMAE_LEN32_WR_MAX) {

			bnx2x_write_dmae(bp, bp->gunzip_mapping + offset,

					 addr + offset, DMAE_LEN32_WR_MAX);

			offset += DMAE_LEN32_WR_MAX * 4;

			len -= DMAE_LEN32_WR_MAX;

		}

		bnx2x_write_dmae(bp, bp->gunzip_mapping + offset,

				 addr + offset, len);

	} else

		bnx2x_init_str_wr(bp, addr, bp->gunzip_buf, len);

#else

	bnx2x_init_str_wr(bp, addr, bp->gunzip_buf, len);

#endif

}



static void bnx2x_init_fill(struct bnx2x *bp, u32 addr, int fill, u32 len)

{

	if ((len * 4) > FW_BUF_SIZE) {

		BNX2X_ERR("LARGE DMAE OPERATION ! addr 0x%x  len 0x%x\n",

			  addr, len*4);

		return;

	}

	memset(bp->gunzip_buf, fill, len * 4);



	bnx2x_write_big_buf(bp, addr, len);

}



static void bnx2x_init_wr_64(struct bnx2x *bp, u32 addr, const u32 *data,

			     u32 len64)

{

	u32 buf_len32 = FW_BUF_SIZE/4;

	u32 len = len64*2;

	u64 data64 = 0;

	int i;



	/* 64 bit value is in a blob: first low DWORD, then high DWORD */

	data64 = HILO_U64((*(data + 1)), (*data));

	len64 = min((u32)(FW_BUF_SIZE/8), len64);

	for (i = 0; i < len64; i++) {

		u64 *pdata = ((u64 *)(bp->gunzip_buf)) + i;



		*pdata = data64;

	}



	for (i = 0; i < len; i += buf_len32) {

		u32 cur_len = min(buf_len32, len - i);



		bnx2x_write_big_buf(bp, addr + i * 4, cur_len);

	}

}



/*********************************************************

   There are different blobs for each PRAM section.

   In addition, each blob write operation is divided into a few operations

   in order to decrease the amount of phys. contigious buffer needed.

   Thus, when we select a blob the address may be with some offset

   from the beginning of PRAM section.

   The same holds for the INT_TABLE sections.

**********************************************************/

#define IF_IS_INT_TABLE_ADDR(base, addr) \

			if (((base) <= (addr)) && ((base) + 0x400 >= (addr)))



#define IF_IS_PRAM_ADDR(base, addr) \

			if (((base) <= (addr)) && ((base) + 0x40000 >= (addr)))



static const u32 *bnx2x_sel_blob(u32 addr, const u32 *data, int is_e1)

{

	IF_IS_INT_TABLE_ADDR(TSEM_REG_INT_TABLE, addr)

		data = is_e1 ? tsem_int_table_data_e1 :

			       tsem_int_table_data_e1h;

	else

		IF_IS_INT_TABLE_ADDR(CSEM_REG_INT_TABLE, addr)

		data = is_e1 ? csem_int_table_data_e1 :

			       csem_int_table_data_e1h;

	else

		IF_IS_INT_TABLE_ADDR(USEM_REG_INT_TABLE, addr)

		data = is_e1 ? usem_int_table_data_e1 :

			       usem_int_table_data_e1h;

	else

		IF_IS_INT_TABLE_ADDR(XSEM_REG_INT_TABLE, addr)

		data = is_e1 ? xsem_int_table_data_e1 :

			       xsem_int_table_data_e1h;

	else

		IF_IS_PRAM_ADDR(TSEM_REG_PRAM, addr)

		data = is_e1 ? tsem_pram_data_e1 : tsem_pram_data_e1h;

	else

		IF_IS_PRAM_ADDR(CSEM_REG_PRAM, addr)

		data = is_e1 ? csem_pram_data_e1 : csem_pram_data_e1h;

	else

		IF_IS_PRAM_ADDR(USEM_REG_PRAM, addr)

		data = is_e1 ? usem_pram_data_e1 : usem_pram_data_e1h;

	else

		IF_IS_PRAM_ADDR(XSEM_REG_PRAM, addr)

		data = is_e1 ? xsem_pram_data_e1 : xsem_pram_data_e1h;



	return data;

}



static void bnx2x_init_wr_wb(struct bnx2x *bp, u32 addr, const u32 *data,

			     u32 len, int gunzip)

			     u32 len, int gunzip, int is_e1, u32 blob_off)

{

	int offset = 0;



	data = bnx2x_sel_blob(addr, data, is_e1) + blob_off;



	if (gunzip) {

		int rc;

#ifdef __BIG_ENDIAN
@@ -136,7 +273,7 @@ static void bnx2x_init_wr_wb(struct bnx2x *bp, u32 addr, const u32 *data, 
#endif

		rc = bnx2x_gunzip(bp, (u8 *)data, len);

		if (rc) {

			DP(NETIF_MSG_HW, "gunzip failed ! rc %d\n", rc);

			BNX2X_ERR("gunzip failed ! rc %d\n", rc);

			return;

		}

		len = bp->gunzip_outlen;
@@ -148,52 +285,47 @@ static void bnx2x_init_wr_wb(struct bnx2x *bp, u32 addr, const u32 *data, 
#endif

	} else {

		if ((len * 4) > FW_BUF_SIZE) {

			BNX2X_ERR("LARGE DMAE OPERATION ! len 0x%x\n", len*4);

			BNX2X_ERR("LARGE DMAE OPERATION ! "

				  "addr 0x%x  len 0x%x\n", addr, len*4);

			return;

		}

		memcpy(bp->gunzip_buf, data, len * 4);

	}



	while (len > DMAE_LEN32_MAX) {

	if (bp->dmae_ready) {

		while (len > DMAE_LEN32_WR_MAX) {

			bnx2x_write_dmae(bp, bp->gunzip_mapping + offset,

				 addr + offset, DMAE_LEN32_MAX);

		offset += DMAE_LEN32_MAX * 4;

		len -= DMAE_LEN32_MAX;

	}

	bnx2x_write_dmae(bp, bp->gunzip_mapping + offset, addr + offset, len);

					 addr + offset, DMAE_LEN32_WR_MAX);

			offset += DMAE_LEN32_WR_MAX * 4;

			len -= DMAE_LEN32_WR_MAX;

		}



#define INIT_MEM_WB(reg, data, reg_off, len) \

	bnx2x_init_wr_wb(bp, reg + reg_off*4, data, len, 0)



#define INIT_GUNZIP_DMAE(reg, data, reg_off, len) \

	bnx2x_init_wr_wb(bp, reg + reg_off*4, data, len, 1)



static void bnx2x_init_fill(struct bnx2x *bp, u32 addr, int fill, u32 len)

{

	int offset = 0;



	if ((len * 4) > FW_BUF_SIZE) {

		BNX2X_ERR("LARGE DMAE OPERATION ! len 0x%x\n", len * 4);

		return;

	}

	memset(bp->gunzip_buf, fill, len * 4);



	while (len > DMAE_LEN32_MAX) {

		bnx2x_write_dmae(bp, bp->gunzip_mapping + offset,

				 addr + offset, DMAE_LEN32_MAX);

		offset += DMAE_LEN32_MAX * 4;

		len -= DMAE_LEN32_MAX;

	}

	bnx2x_write_dmae(bp, bp->gunzip_mapping + offset, addr + offset, len);

				 addr + offset, len);

	} else

		bnx2x_init_ind_wr(bp, addr, bp->gunzip_buf, len);

}



static void bnx2x_init_block(struct bnx2x *bp, u32 op_start, u32 op_end)

{

	int i;

	int is_e1       = CHIP_IS_E1(bp);

	int is_e1h      = CHIP_IS_E1H(bp);

	int is_emul_e1h = (CHIP_REV_IS_EMUL(bp) && is_e1h);

	int hw_wr, i;

	union init_op *op;

	u32 op_type, addr, len;

	const u32 *data;

	const u32 *data, *data_base;



	if (CHIP_REV_IS_FPGA(bp))

		hw_wr = OP_WR_FPGA;

	else if (CHIP_REV_IS_EMUL(bp))

		hw_wr = OP_WR_EMUL;

	else

		hw_wr = OP_WR_ASIC;



	if (is_e1)

		data_base = init_data_e1;

	else /* CHIP_IS_E1H(bp) */

		data_base = init_data_e1h;



	for (i = op_start; i < op_end; i++) {
@@ -202,7 +334,30 @@ static void bnx2x_init_block(struct bnx2x *bp, u32 op_start, u32 op_end) 
		op_type = op->str_wr.op;

		addr = op->str_wr.offset;

		len = op->str_wr.data_len;

		data = init_data + op->str_wr.data_off;

		data = data_base + op->str_wr.data_off;



		/* carefull! it must be in order */

		if (unlikely(op_type > OP_WB)) {



			/* If E1 only */

			if (op_type <= OP_WB_E1) {

				if (is_e1)

					op_type -= (OP_RD_E1 - OP_RD);



			/* If E1H only */

			} else if (op_type <= OP_WB_E1H) {

				if (is_e1h)

					op_type -= (OP_RD_E1H - OP_RD);

			}



			/* HW/EMUL specific */

			if (op_type == hw_wr)

				op_type = OP_WR;



			/* EMUL on E1H is special */

			if ((op_type == OP_WR_EMUL_E1H) && is_emul_e1h)

				op_type = OP_WR;

		}



		switch (op_type) {

		case OP_RD:
@@ -215,7 +370,7 @@ static void bnx2x_init_block(struct bnx2x *bp, u32 op_start, u32 op_end) 
			bnx2x_init_str_wr(bp, addr, data, len);

			break;

		case OP_WB:

			bnx2x_init_wr_wb(bp, addr, data, len, 0);

			bnx2x_init_wr_wb(bp, addr, data, len, 0, is_e1, 0);

			break;

		case OP_SI:

			bnx2x_init_ind_wr(bp, addr, data, len);
@@ -224,10 +379,21 @@ static void bnx2x_init_block(struct bnx2x *bp, u32 op_start, u32 op_end) 
			bnx2x_init_fill(bp, addr, 0, op->zero.len);

			break;

		case OP_ZP:

			bnx2x_init_wr_wb(bp, addr, data, len, 1);

			bnx2x_init_wr_wb(bp, addr, data, len, 1, is_e1,

					 op->str_wr.data_off);

			break;

		case OP_WR_64:

			bnx2x_init_wr_64(bp, addr, data, len);

			break;

		default:

			BNX2X_ERR("BAD init operation!\n");

			/* happens whenever an op is of a diff HW */

#if 0

			DP(NETIF_MSG_HW, "skipping init operation  "

			   "index %d[%d:%d]: type %d  addr 0x%x  "

			   "len %d(0x%x)\n",

			   i, op_start, op_end, op_type, addr, len, len);

#endif

			break;

		}

	}

}
@@ -238,7 +404,7 @@ static void bnx2x_init_block(struct bnx2x *bp, u32 op_start, u32 op_end) 
****************************************************************************/

/*

 * This code configures the PCI read/write arbiter

 * which implements a wighted round robin

 * which implements a weighted round robin

 * between the virtual queues in the chip.

 *

 * The values were derived for each PCI max payload and max request size.
@@ -308,7 +474,7 @@ static const struct arb_line write_arb_data[NUM_WR_Q][MAX_WR_ORD + 1] = { 
	{{8 , 64 , 25}, {16 , 64 , 41}, {32 , 64 , 81} }

};



/* register adresses for read queues */

/* register addresses for read queues */

static const struct arb_line read_arb_addr[NUM_RD_Q-1] = {

	{PXP2_REG_RQ_BW_RD_L0, PXP2_REG_RQ_BW_RD_ADD0,

		PXP2_REG_RQ_BW_RD_UBOUND0},
@@ -368,7 +534,7 @@ static const struct arb_line read_arb_addr[NUM_RD_Q-1] = { 
		PXP2_REG_PSWRQ_BW_UB28}

};



/* register adresses for wrtie queues */

/* register addresses for write queues */

static const struct arb_line write_arb_addr[NUM_WR_Q-1] = {

	{PXP2_REG_PSWRQ_BW_L1, PXP2_REG_PSWRQ_BW_ADD1,

		PXP2_REG_PSWRQ_BW_UB1},
@@ -417,6 +583,10 @@ static void bnx2x_init_pxp(struct bnx2x *bp) 
		   w_order, MAX_WR_ORD);

		w_order = MAX_WR_ORD;

	}

	if (CHIP_REV_IS_FPGA(bp)) {

		DP(NETIF_MSG_HW, "write order adjusted to 1 for FPGA\n");

		w_order = 0;

	}

	DP(NETIF_MSG_HW, "read order %d  write order %d\n", r_order, w_order);



	for (i = 0; i < NUM_RD_Q-1; i++) {
@@ -474,7 +644,20 @@ static void bnx2x_init_pxp(struct bnx2x *bp) 
		REG_WR(bp, PXP2_REG_RQ_PDR_LIMIT, 0xe00);



	REG_WR(bp, PXP2_REG_WR_USDMDP_TH, (0x18 << w_order));

	REG_WR(bp, PXP2_REG_WR_DMAE_TH, (128 << w_order)/16);



	if (CHIP_IS_E1H(bp)) {

		REG_WR(bp, PXP2_REG_WR_HC_MPS, w_order+1);

		REG_WR(bp, PXP2_REG_WR_USDM_MPS, w_order+1);

		REG_WR(bp, PXP2_REG_WR_CSDM_MPS, w_order+1);

		REG_WR(bp, PXP2_REG_WR_TSDM_MPS, w_order+1);

		REG_WR(bp, PXP2_REG_WR_XSDM_MPS, w_order+1);

		REG_WR(bp, PXP2_REG_WR_QM_MPS, w_order+1);

		REG_WR(bp, PXP2_REG_WR_TM_MPS, w_order+1);

		REG_WR(bp, PXP2_REG_WR_SRC_MPS, w_order+1);

		REG_WR(bp, PXP2_REG_WR_DBG_MPS, w_order+1);

		REG_WR(bp, PXP2_REG_WR_DMAE_MPS, 2); /* DMAE is special */

		REG_WR(bp, PXP2_REG_WR_CDU_MPS, w_order+1);

	}

}
@@ -557,6 +740,72 @@ static u8 calc_crc8(u32 data, u8 crc) 
	return crc_res;

}



/* regiesers addresses are not in order

   so these arrays help simplify the code */

static const int cm_start[E1H_FUNC_MAX][9] = {

	{MISC_FUNC0_START, TCM_FUNC0_START, UCM_FUNC0_START, CCM_FUNC0_START,

	 XCM_FUNC0_START, TSEM_FUNC0_START, USEM_FUNC0_START, CSEM_FUNC0_START,

	 XSEM_FUNC0_START},

	{MISC_FUNC1_START, TCM_FUNC1_START, UCM_FUNC1_START, CCM_FUNC1_START,

	 XCM_FUNC1_START, TSEM_FUNC1_START, USEM_FUNC1_START, CSEM_FUNC1_START,

	 XSEM_FUNC1_START},

	{MISC_FUNC2_START, TCM_FUNC2_START, UCM_FUNC2_START, CCM_FUNC2_START,

	 XCM_FUNC2_START, TSEM_FUNC2_START, USEM_FUNC2_START, CSEM_FUNC2_START,

	 XSEM_FUNC2_START},

	{MISC_FUNC3_START, TCM_FUNC3_START, UCM_FUNC3_START, CCM_FUNC3_START,

	 XCM_FUNC3_START, TSEM_FUNC3_START, USEM_FUNC3_START, CSEM_FUNC3_START,

	 XSEM_FUNC3_START},

	{MISC_FUNC4_START, TCM_FUNC4_START, UCM_FUNC4_START, CCM_FUNC4_START,

	 XCM_FUNC4_START, TSEM_FUNC4_START, USEM_FUNC4_START, CSEM_FUNC4_START,

	 XSEM_FUNC4_START},

	{MISC_FUNC5_START, TCM_FUNC5_START, UCM_FUNC5_START, CCM_FUNC5_START,

	 XCM_FUNC5_START, TSEM_FUNC5_START, USEM_FUNC5_START, CSEM_FUNC5_START,

	 XSEM_FUNC5_START},

	{MISC_FUNC6_START, TCM_FUNC6_START, UCM_FUNC6_START, CCM_FUNC6_START,

	 XCM_FUNC6_START, TSEM_FUNC6_START, USEM_FUNC6_START, CSEM_FUNC6_START,

	 XSEM_FUNC6_START},

	{MISC_FUNC7_START, TCM_FUNC7_START, UCM_FUNC7_START, CCM_FUNC7_START,

	 XCM_FUNC7_START, TSEM_FUNC7_START, USEM_FUNC7_START, CSEM_FUNC7_START,

	 XSEM_FUNC7_START}

};



static const int cm_end[E1H_FUNC_MAX][9] = {

	{MISC_FUNC0_END, TCM_FUNC0_END, UCM_FUNC0_END, CCM_FUNC0_END,

	 XCM_FUNC0_END, TSEM_FUNC0_END, USEM_FUNC0_END, CSEM_FUNC0_END,

	 XSEM_FUNC0_END},

	{MISC_FUNC1_END, TCM_FUNC1_END, UCM_FUNC1_END, CCM_FUNC1_END,

	 XCM_FUNC1_END, TSEM_FUNC1_END, USEM_FUNC1_END, CSEM_FUNC1_END,

	 XSEM_FUNC1_END},

	{MISC_FUNC2_END, TCM_FUNC2_END, UCM_FUNC2_END, CCM_FUNC2_END,

	 XCM_FUNC2_END, TSEM_FUNC2_END, USEM_FUNC2_END, CSEM_FUNC2_END,

	 XSEM_FUNC2_END},

	{MISC_FUNC3_END, TCM_FUNC3_END, UCM_FUNC3_END, CCM_FUNC3_END,

	 XCM_FUNC3_END, TSEM_FUNC3_END, USEM_FUNC3_END, CSEM_FUNC3_END,

	 XSEM_FUNC3_END},

	{MISC_FUNC4_END, TCM_FUNC4_END, UCM_FUNC4_END, CCM_FUNC4_END,

	 XCM_FUNC4_END, TSEM_FUNC4_END, USEM_FUNC4_END, CSEM_FUNC4_END,

	 XSEM_FUNC4_END},

	{MISC_FUNC5_END, TCM_FUNC5_END, UCM_FUNC5_END, CCM_FUNC5_END,

	 XCM_FUNC5_END, TSEM_FUNC5_END, USEM_FUNC5_END, CSEM_FUNC5_END,

	 XSEM_FUNC5_END},

	{MISC_FUNC6_END, TCM_FUNC6_END, UCM_FUNC6_END, CCM_FUNC6_END,

	 XCM_FUNC6_END, TSEM_FUNC6_END, USEM_FUNC6_END, CSEM_FUNC6_END,

	 XSEM_FUNC6_END},

	{MISC_FUNC7_END, TCM_FUNC7_END, UCM_FUNC7_END, CCM_FUNC7_END,

	 XCM_FUNC7_END, TSEM_FUNC7_END, USEM_FUNC7_END, CSEM_FUNC7_END,

	 XSEM_FUNC7_END},

};



static const int hc_limits[E1H_FUNC_MAX][2] = {

	{HC_FUNC0_START, HC_FUNC0_END},

	{HC_FUNC1_START, HC_FUNC1_END},

	{HC_FUNC2_START, HC_FUNC2_END},

	{HC_FUNC3_START, HC_FUNC3_END},

	{HC_FUNC4_START, HC_FUNC4_END},

	{HC_FUNC5_START, HC_FUNC5_END},

	{HC_FUNC6_START, HC_FUNC6_END},

	{HC_FUNC7_START, HC_FUNC7_END}

};



#endif /* BNX2X_INIT_H */

CRA Git | Maintained and supported by SUSTech CRA and CCSE