Commit aca429ff authored by Richard Fitzgerald's avatar Richard Fitzgerald Committed by Lee Jones
Browse files

gpio: madera: Support Cirrus Logic Madera class codecs 



This adds support for the GPIOs on Cirrus Logic Madera class codecs.
Any pins not used for special functions (see the pinctrl driver) can be
used as general single-bit input or output lines. The number of available
GPIOs varies between codecs.

Note that this is part of a composite MFD for these codecs and can only
be used with the corresponding MFD and other child drivers on those
silicon. The GPIO block on these codecs does not exist indepedently of
the rest of the MFD.

Signed-off-by: default avatarNariman Poushin <nariman@opensource.cirrus.com>
Signed-off-by: default avatarRichard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: default avatarCharles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: default avatarLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: default avatarLee Jones <lee.jones@linaro.org>
parent 218d72a7

MAINTAINERS

+1 −0
Original line number Diff line number Diff line
@@ -3490,6 +3490,7 @@ S: Supported 
F:	Documentation/devicetree/bindings/mfd/madera.txt

F:	Documentation/devicetree/bindings/pinctrl/cirrus,madera-pinctrl.txt

F:	include/linux/mfd/madera/*

F:	drivers/gpio/gpio-madera*

F:	drivers/mfd/madera*

F:	drivers/mfd/cs47l*

F:	drivers/pinctrl/cirrus/*

drivers/gpio/Kconfig

+6 −0
Original line number Diff line number Diff line
@@ -1027,6 +1027,12 @@ config GPIO_LP87565 
	  This driver can also be built as a module. If so, the module will be

	  called gpio-lp87565.



config GPIO_MADERA

	tristate "Cirrus Logic Madera class codecs"

	depends on PINCTRL_MADERA

	help

	  Support for GPIOs on Cirrus Logic Madera class codecs.



config GPIO_MAX77620

	tristate "GPIO support for PMIC MAX77620 and MAX20024"

	depends on MFD_MAX77620

drivers/gpio/Makefile

+1 −0
Original line number Diff line number Diff line
@@ -71,6 +71,7 @@ obj-$(CONFIG_ARCH_LPC32XX) += gpio-lpc32xx.o 
obj-$(CONFIG_GPIO_LP873X)	+= gpio-lp873x.o

obj-$(CONFIG_GPIO_LP87565)	+= gpio-lp87565.o

obj-$(CONFIG_GPIO_LYNXPOINT)	+= gpio-lynxpoint.o

obj-$(CONFIG_GPIO_MADERA)	+= gpio-madera.o

obj-$(CONFIG_GPIO_MAX3191X)	+= gpio-max3191x.o

obj-$(CONFIG_GPIO_MAX730X)	+= gpio-max730x.o

obj-$(CONFIG_GPIO_MAX7300)	+= gpio-max7300.o

drivers/gpio/gpio-madera.c

0 → 100644
+206 −0
Original line number Diff line number Diff line 
// SPDX-License-Identifier: GPL-2.0

/*

 * GPIO support for Cirrus Logic Madera codecs

 *

 * Copyright (C) 2015-2018 Cirrus Logic

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License as published by the

 * Free Software Foundation; version 2.

 */



#include <linux/gpio/driver.h>

#include <linux/kernel.h>

#include <linux/module.h>

#include <linux/platform_device.h>



#include <linux/mfd/madera/core.h>

#include <linux/mfd/madera/pdata.h>

#include <linux/mfd/madera/registers.h>



struct madera_gpio {

	struct madera *madera;

	/* storage space for the gpio_chip we're using */

	struct gpio_chip gpio_chip;

};



static int madera_gpio_get_direction(struct gpio_chip *chip,

				     unsigned int offset)

{

	struct madera_gpio *madera_gpio = gpiochip_get_data(chip);

	struct madera *madera = madera_gpio->madera;

	unsigned int reg_offset = 2 * offset;

	unsigned int val;

	int ret;



	ret = regmap_read(madera->regmap, MADERA_GPIO1_CTRL_2 + reg_offset,

			  &val);

	if (ret < 0)

		return ret;



	return !!(val & MADERA_GP1_DIR_MASK);

}



static int madera_gpio_direction_in(struct gpio_chip *chip, unsigned int offset)

{

	struct madera_gpio *madera_gpio = gpiochip_get_data(chip);

	struct madera *madera = madera_gpio->madera;

	unsigned int reg_offset = 2 * offset;



	return regmap_update_bits(madera->regmap,

				  MADERA_GPIO1_CTRL_2 + reg_offset,

				  MADERA_GP1_DIR_MASK, MADERA_GP1_DIR);

}



static int madera_gpio_get(struct gpio_chip *chip, unsigned int offset)

{

	struct madera_gpio *madera_gpio = gpiochip_get_data(chip);

	struct madera *madera = madera_gpio->madera;

	unsigned int reg_offset = 2 * offset;

	unsigned int val;

	int ret;



	ret = regmap_read(madera->regmap, MADERA_GPIO1_CTRL_1 + reg_offset,

			  &val);

	if (ret < 0)

		return ret;



	return !!(val & MADERA_GP1_LVL_MASK);

}



static int madera_gpio_direction_out(struct gpio_chip *chip,

				     unsigned int offset, int value)

{

	struct madera_gpio *madera_gpio = gpiochip_get_data(chip);

	struct madera *madera = madera_gpio->madera;

	unsigned int reg_offset = 2 * offset;

	unsigned int reg_val = value ? MADERA_GP1_LVL : 0;

	int ret;



	ret = regmap_update_bits(madera->regmap,

				 MADERA_GPIO1_CTRL_2 + reg_offset,

				 MADERA_GP1_DIR_MASK, 0);

	if (ret < 0)

		return ret;



	return regmap_update_bits(madera->regmap,

				  MADERA_GPIO1_CTRL_1 + reg_offset,

				  MADERA_GP1_LVL_MASK, reg_val);

}



static void madera_gpio_set(struct gpio_chip *chip, unsigned int offset,

			    int value)

{

	struct madera_gpio *madera_gpio = gpiochip_get_data(chip);

	struct madera *madera = madera_gpio->madera;

	unsigned int reg_offset = 2 * offset;

	unsigned int reg_val = value ? MADERA_GP1_LVL : 0;

	int ret;



	ret = regmap_update_bits(madera->regmap,

				 MADERA_GPIO1_CTRL_1 + reg_offset,

				 MADERA_GP1_LVL_MASK, reg_val);



	/* set() doesn't return an error so log a warning */

	if (ret)

		dev_warn(madera->dev, "Failed to write to 0x%x (%d)\n",

			 MADERA_GPIO1_CTRL_1 + reg_offset, ret);

}



static struct gpio_chip madera_gpio_chip = {

	.label			= "madera",

	.owner			= THIS_MODULE,

	.request		= gpiochip_generic_request,

	.free			= gpiochip_generic_free,

	.get_direction		= madera_gpio_get_direction,

	.direction_input	= madera_gpio_direction_in,

	.get			= madera_gpio_get,

	.direction_output	= madera_gpio_direction_out,

	.set			= madera_gpio_set,

	.set_config		= gpiochip_generic_config,

	.can_sleep		= true,

};



static int madera_gpio_probe(struct platform_device *pdev)

{

	struct madera *madera = dev_get_drvdata(pdev->dev.parent);

	struct madera_pdata *pdata = dev_get_platdata(madera->dev);

	struct madera_gpio *madera_gpio;

	int ret;



	madera_gpio = devm_kzalloc(&pdev->dev, sizeof(*madera_gpio),

				   GFP_KERNEL);

	if (!madera_gpio)

		return -ENOMEM;



	madera_gpio->madera = madera;



	/* Construct suitable gpio_chip from the template in madera_gpio_chip */

	madera_gpio->gpio_chip = madera_gpio_chip;

	madera_gpio->gpio_chip.parent = pdev->dev.parent;



	switch (madera->type) {

	case CS47L35:

		madera_gpio->gpio_chip.ngpio = CS47L35_NUM_GPIOS;

		break;

	case CS47L85:

	case WM1840:

		madera_gpio->gpio_chip.ngpio = CS47L85_NUM_GPIOS;

		break;

	case CS47L90:

	case CS47L91:

		madera_gpio->gpio_chip.ngpio = CS47L90_NUM_GPIOS;

		break;

	default:

		dev_err(&pdev->dev, "Unknown chip variant %d\n", madera->type);

		return -EINVAL;

	}



	/* We want to be usable on systems that don't use devicetree or acpi */

	if (pdata && pdata->gpio_base)

		madera_gpio->gpio_chip.base = pdata->gpio_base;

	else

		madera_gpio->gpio_chip.base = -1;



	ret = devm_gpiochip_add_data(&pdev->dev,

				     &madera_gpio->gpio_chip,

				     madera_gpio);

	if (ret < 0) {

		dev_dbg(&pdev->dev, "Could not register gpiochip, %d\n", ret);

		return ret;

	}



	/*

	 * This is part of a composite MFD device which can only be used with

	 * the corresponding pinctrl driver. On all supported silicon the GPIO

	 * to pinctrl mapping is fixed in the silicon, so we register it

	 * explicitly instead of requiring a redundant gpio-ranges in the

	 * devicetree.

	 * In any case we also want to work on systems that don't use devicetree

	 * or acpi.

	 */

	ret = gpiochip_add_pin_range(&madera_gpio->gpio_chip, "madera-pinctrl",

				     0, 0, madera_gpio->gpio_chip.ngpio);

	if (ret) {

		dev_dbg(&pdev->dev, "Failed to add pin range (%d)\n", ret);

		return ret;

	}



	return 0;

}



static struct platform_driver madera_gpio_driver = {

	.driver = {

		.name	= "madera-gpio",

	},

	.probe		= madera_gpio_probe,

};



module_platform_driver(madera_gpio_driver);



MODULE_SOFTDEP("pre: pinctrl-madera");

MODULE_DESCRIPTION("GPIO interface for Madera codecs");

MODULE_AUTHOR("Nariman Poushin <nariman@opensource.cirrus.com>");

MODULE_AUTHOR("Richard Fitzgerald <rf@opensource.cirrus.com>");

MODULE_LICENSE("GPL v2");

MODULE_ALIAS("platform:madera-gpio");

CRA Git | Maintained and supported by SUSTech CRA and CCSE