Commit ac61b600 authored by Russell King's avatar Russell King
Browse files

pcmcia: soc_common: add support for Vcc and Vpp regulators 



Add support for handling supply regulators in the soc_common code.  This
allows us to separate out the board specifics for setting voltages from
the PCMCIA code.

We detect when setting a voltage fails, and report this fact - some
platforms have fixed-voltage supplies (eg, for CF sockets at 3.3V) and
we need to ignore attempts to configure for 5V, as per the existing
board specific drivers.

Signed-off-by: default avatarRussell King <rmk+kernel@armlinux.org.uk>
parent a1d05002

drivers/pcmcia/soc_common.c

+36 −1
Original line number Diff line number Diff line
@@ -43,6 +43,7 @@ 
#include <linux/module.h>

#include <linux/moduleparam.h>

#include <linux/mutex.h>

#include <linux/regulator/consumer.h>

#include <linux/spinlock.h>

#include <linux/timer.h>
@@ -80,6 +81,41 @@ EXPORT_SYMBOL(soc_pcmcia_debug); 
#define to_soc_pcmcia_socket(x)	\

	container_of(x, struct soc_pcmcia_socket, socket)



int soc_pcmcia_regulator_set(struct soc_pcmcia_socket *skt,

	struct soc_pcmcia_regulator *r, int v)

{

	bool on;

	int ret;



	if (!r->reg)

		return 0;



	on = v != 0;

	if (r->on == on)

		return 0;



	if (on) {

		ret = regulator_set_voltage(r->reg, v * 100000, v * 100000);

		if (ret) {

			int vout = regulator_get_voltage(r->reg) / 100000;



			dev_warn(&skt->socket.dev,

				 "CS requested %s=%u.%uV, applying %u.%uV\n",

				 r == &skt->vcc ? "Vcc" : "Vpp",

				 v / 10, v % 10, vout / 10, vout % 10);

		}



		ret = regulator_enable(r->reg);

	} else {

		regulator_disable(r->reg);

	}

	if (ret == 0)

		r->on = on;



	return ret;

}

EXPORT_SYMBOL_GPL(soc_pcmcia_regulator_set);



static unsigned short

calc_speed(unsigned short *spds, int num, unsigned short dflt)

{
@@ -119,7 +155,6 @@ static void __soc_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt, 
	if (skt->ops->hw_shutdown)

		skt->ops->hw_shutdown(skt);





	clk_disable_unprepare(skt->clk);

}

drivers/pcmcia/soc_common.h

+11 −0
Original line number Diff line number Diff line
@@ -19,6 +19,12 @@ 
struct device;

struct gpio_desc;

struct pcmcia_low_level;

struct regulator;



struct soc_pcmcia_regulator {

	struct regulator	*reg;

	bool			on;

};



/*

 * This structure encapsulates per-socket state which we might need to
@@ -64,6 +70,8 @@ struct soc_pcmcia_socket { 


	struct gpio_desc	*gpio_reset;

	struct gpio_desc	*gpio_bus_enable;

	struct soc_pcmcia_regulator vcc;

	struct soc_pcmcia_regulator vpp;



	unsigned int		irq_state;
@@ -146,6 +154,9 @@ int soc_pcmcia_request_gpiods(struct soc_pcmcia_socket *skt); 
void soc_common_cf_socket_state(struct soc_pcmcia_socket *skt,

	struct pcmcia_state *state);



int soc_pcmcia_regulator_set(struct soc_pcmcia_socket *skt,

	struct soc_pcmcia_regulator *r, int v);



#ifdef CONFIG_PCMCIA_DEBUG



extern void soc_pcmcia_debug(struct soc_pcmcia_socket *skt, const char *func,

CRA Git | Maintained and supported by SUSTech CRA and CCSE