Commit ac195d94 authored by Stefan Mavrodiev's avatar Stefan Mavrodiev Committed by Lee Jones
Browse files

mfd: rk808: Prepare rk805 for poweroff 



RK805 has SLEEP signal, which can put the device into SLEEP or OFF
mode. The default is SLEEP mode.

However, when the kernel performs power-off (actually the ATF) the
device will not go fully off and this will result in higher power
consumption and inability to wake the device with RTC alarm.

The solution is to enable pm_power_off_prepare function, which will
configure SLEEP pin for OFF function.

Signed-off-by: default avatarStefan Mavrodiev <stefan@olimex.com>
Signed-off-by: default avatarLee Jones <lee.jones@linaro.org>
parent 76304994

drivers/mfd/rk808.c

+35 −15
Original line number Diff line number Diff line
@@ -474,35 +474,44 @@ static void rk805_device_shutdown(void) 
	int ret;

	struct rk808 *rk808 = i2c_get_clientdata(rk808_i2c_client);



	if (!rk808) {

		dev_warn(&rk808_i2c_client->dev,

			 "have no rk805, so do nothing here\n");

	if (!rk808)

		return;

	}



	ret = regmap_update_bits(rk808->regmap,

				 RK805_DEV_CTRL_REG,

				 DEV_OFF, DEV_OFF);

	if (ret)

		dev_err(&rk808_i2c_client->dev, "power off error!\n");

		dev_err(&rk808_i2c_client->dev, "Failed to shutdown device!\n");

}



static void rk808_device_shutdown(void)

static void rk805_device_shutdown_prepare(void)

{

	int ret;

	struct rk808 *rk808 = i2c_get_clientdata(rk808_i2c_client);



	if (!rk808) {

		dev_warn(&rk808_i2c_client->dev,

			 "have no rk808, so do nothing here\n");

	if (!rk808)

		return;



	ret = regmap_update_bits(rk808->regmap,

				 RK805_GPIO_IO_POL_REG,

				 SLP_SD_MSK, SHUTDOWN_FUN);

	if (ret)

		dev_err(&rk808_i2c_client->dev, "Failed to shutdown device!\n");

}



static void rk808_device_shutdown(void)

{

	int ret;

	struct rk808 *rk808 = i2c_get_clientdata(rk808_i2c_client);



	if (!rk808)

		return;



	ret = regmap_update_bits(rk808->regmap,

				 RK808_DEVCTRL_REG,

				 DEV_OFF_RST, DEV_OFF_RST);

	if (ret)

		dev_err(&rk808_i2c_client->dev, "power off error!\n");

		dev_err(&rk808_i2c_client->dev, "Failed to shutdown device!\n");

}



static void rk818_device_shutdown(void)
@@ -510,17 +519,14 @@ static void rk818_device_shutdown(void) 
	int ret;

	struct rk808 *rk808 = i2c_get_clientdata(rk808_i2c_client);



	if (!rk808) {

		dev_warn(&rk808_i2c_client->dev,

			 "have no rk818, so do nothing here\n");

	if (!rk808)

		return;

	}



	ret = regmap_update_bits(rk808->regmap,

				 RK818_DEVCTRL_REG,

				 DEV_OFF, DEV_OFF);

	if (ret)

		dev_err(&rk808_i2c_client->dev, "power off error!\n");

		dev_err(&rk808_i2c_client->dev, "Failed to shutdown device!\n");

}



static void rk8xx_syscore_shutdown(void)
@@ -609,6 +615,7 @@ static int rk808_probe(struct i2c_client *client, 
		cells = rk805s;

		nr_cells = ARRAY_SIZE(rk805s);

		rk808->pm_pwroff_fn = rk805_device_shutdown;

		rk808->pm_pwroff_prep_fn = rk805_device_shutdown_prepare;

		break;

	case RK808_ID:

		rk808->regmap_cfg = &rk808_regmap_config;
@@ -694,6 +701,12 @@ static int rk808_probe(struct i2c_client *client, 
		pm_power_off = rk808->pm_pwroff_fn;

	}



	if (pm_off && !pm_power_off_prepare) {

		if (!rk808_i2c_client)

			rk808_i2c_client = client;

		pm_power_off_prepare = rk808->pm_pwroff_prep_fn;

	}



	return 0;



err_irq:
@@ -714,6 +727,13 @@ static int rk808_remove(struct i2c_client *client) 
	if (rk808->pm_pwroff_fn && pm_power_off == rk808->pm_pwroff_fn)

		pm_power_off = NULL;



	/**

	 * As above, check if the pointer is set by us before overwrite.

	 */

	if (rk808->pm_pwroff_prep_fn &&

	    pm_power_off_prepare == rk808->pm_pwroff_prep_fn)

		pm_power_off_prepare = NULL;



	return 0;

}

include/linux/mfd/rk808.h

+1 −0
Original line number Diff line number Diff line
@@ -629,5 +629,6 @@ struct rk808 { 
	const struct regmap_config	*regmap_cfg;

	const struct regmap_irq_chip	*regmap_irq_chip;

	void				(*pm_pwroff_fn)(void);

	void				(*pm_pwroff_prep_fn)(void);

};

#endif /* __LINUX_REGULATOR_RK808_H */

CRA Git | Maintained and supported by SUSTech CRA and CCSE