powerpc/85xx: Rework P1022DS device tree (ab827d97) · Commits · 戴 / test

arch/powerpc/boot/dts/fsl/p1022si-post.dtsi

0 → 100644

+235 −0

Original line number	Diff line number	Diff line
		/*
		* P1022/P1013 Silicon/SoC Device Tree Source (post include)
		*
		* Copyright 2011 Freescale Semiconductor Inc.
		*
		* Redistribution and use in source and binary forms, with or without
		* modification, are permitted provided that the following conditions are met:
		* * Redistributions of source code must retain the above copyright
		* notice, this list of conditions and the following disclaimer.
		* * Redistributions in binary form must reproduce the above copyright
		* notice, this list of conditions and the following disclaimer in the
		* documentation and/or other materials provided with the distribution.
		* * Neither the name of Freescale Semiconductor nor the
		* names of its contributors may be used to endorse or promote products
		* derived from this software without specific prior written permission.
		*
		*
		* ALTERNATIVELY, this software may be distributed under the terms of the
		* GNU General Public License ("GPL") as published by the Free Software
		* Foundation, either version 2 of that License or (at your option) any
		* later version.
		*
		* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
		* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
		* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
		* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
		* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
		* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
		* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
		* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
		* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
		* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
		*/

		&lbc {
		#address-cells = <2>;
		#size-cells = <1>;
		compatible = "fsl,p1022-elbc", "fsl,elbc", "simple-bus";
		interrupts = <19 2 0 0>;
		};

		/* controller at 0x9000 */
		&pci0 {
		compatible = "fsl,p1022-pcie";
		device_type = "pci";
		#size-cells = <2>;
		#address-cells = <3>;
		bus-range = <0 255>;
		clock-frequency = <33333333>;
		interrupts = <16 2 0 0>;

		pcie@0 {
		reg = <0 0 0 0 0>;
		#interrupt-cells = <1>;
		#size-cells = <2>;
		#address-cells = <3>;
		device_type = "pci";
		interrupts = <16 2 0 0>;
		interrupt-map-mask = <0xf800 0 0 7>;
		interrupt-map = <
		/* IDSEL 0x0 */
		0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
		0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
		0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
		0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
		>;
		};
		};

		/* controller at 0xa000 */
		&pci1 {
		compatible = "fsl,p1022-pcie";
		device_type = "pci";
		#size-cells = <2>;
		#address-cells = <3>;
		bus-range = <0 255>;
		clock-frequency = <33333333>;
		interrupts = <16 2 0 0>;

		pcie@0 {
		reg = <0 0 0 0 0>;
		#interrupt-cells = <1>;
		#size-cells = <2>;
		#address-cells = <3>;
		device_type = "pci";
		interrupts = <16 2 0 0>;
		interrupt-map-mask = <0xf800 0 0 7>;

		interrupt-map = <
		/* IDSEL 0x0 */
		0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
		0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
		0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
		0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
		>;
		};
		};

		/* controller at 0xb000 */
		&pci2 {
		compatible = "fsl,p1022-pcie";
		device_type = "pci";
		#size-cells = <2>;
		#address-cells = <3>;
		bus-range = <0 255>;
		clock-frequency = <33333333>;
		interrupts = <16 2 0 0>;

		pcie@0 {
		reg = <0 0 0 0 0>;
		#interrupt-cells = <1>;
		#size-cells = <2>;
		#address-cells = <3>;
		device_type = "pci";
		interrupts = <16 2 0 0>;
		interrupt-map-mask = <0xf800 0 0 7>;

		interrupt-map = <
		/* IDSEL 0x0 */
		0000 0x0 0x0 0x1 &mpic 0x8 0x1 0x0 0x0
		0000 0x0 0x0 0x2 &mpic 0x9 0x1 0x0 0x0
		0000 0x0 0x0 0x3 &mpic 0xa 0x1 0x0 0x0
		0000 0x0 0x0 0x4 &mpic 0xb 0x1 0x0 0x0
		>;
		};
		};

		&soc {
		#address-cells = <1>;
		#size-cells = <1>;
		device_type = "soc";
		compatible = "fsl,p1022-immr", "simple-bus";
		bus-frequency = <0>; // Filled out by uboot.

		ecm-law@0 {
		compatible = "fsl,ecm-law";
		reg = <0x0 0x1000>;
		fsl,num-laws = <12>;
		};

		ecm@1000 {
		compatible = "fsl,p1022-ecm", "fsl,ecm";
		reg = <0x1000 0x1000>;
		interrupts = <16 2 0 0>;
		};

		memory-controller@2000 {
		compatible = "fsl,p1022-memory-controller";
		reg = <0x2000 0x1000>;
		interrupts = <16 2 0 0>;
		};

		/include/ "pq3-i2c-0.dtsi"
		/include/ "pq3-i2c-1.dtsi"
		/include/ "pq3-duart-0.dtsi"
		/include/ "pq3-espi-0.dtsi"
		spi@7000 {
		fsl,espi-num-chipselects = <4>;
		};

		/include/ "pq3-dma-1.dtsi"
		dma@c300 {
		dma00: dma-channel@0 {
		compatible = "fsl,ssi-dma-channel";
		};
		dma01: dma-channel@80 {
		compatible = "fsl,ssi-dma-channel";
		};
		};

		/include/ "pq3-gpio-0.dtsi"

		display@10000 {
		compatible = "fsl,diu", "fsl,p1022-diu";
		reg = <0x10000 1000>;
		interrupts = <64 2 0 0>;
		};

		ssi@15000 {
		compatible = "fsl,mpc8610-ssi";
		cell-index = <0>;
		reg = <0x15000 0x100>;
		interrupts = <75 2 0 0>;
		fsl,playback-dma = <&dma00>;
		fsl,capture-dma = <&dma01>;
		fsl,fifo-depth = <15>;
		};

		/include/ "pq3-sata2-0.dtsi"
		/include/ "pq3-sata2-1.dtsi"

		L2: l2-cache-controller@20000 {
		compatible = "fsl,p1022-l2-cache-controller";
		reg = <0x20000 0x1000>;
		cache-line-size = <32>; // 32 bytes
		cache-size = <0x40000>; // L2,256K
		interrupts = <16 2 0 0>;
		};

		/include/ "pq3-dma-0.dtsi"
		/include/ "pq3-usb2-dr-0.dtsi"
		/include/ "pq3-usb2-dr-1.dtsi"

		/include/ "pq3-esdhc-0.dtsi"
		sdhc@2e000 {
		fsl,sdhci-auto-cmd12;
		};

		/include/ "pq3-sec3.3-0.dtsi"
		/include/ "pq3-mpic.dtsi"
		/include/ "pq3-mpic-timer-B.dtsi"

		/include/ "pq3-etsec2-0.dtsi"
		enet0: enet0_grp2: ethernet@b0000 {
		};

		/include/ "pq3-etsec2-1.dtsi"
		enet1: enet1_grp2: ethernet@b1000 {
		};

		global-utilities@e0000 {
		compatible = "fsl,p1022-guts";
		reg = <0xe0000 0x1000>;
		fsl,has-rstcr;
		};

		power@e0070{
		compatible = "fsl,mpc8536-pmc", "fsl,mpc8548-pmc";
		reg = <0xe0070 0x20>;
		};

		};

		/include/ "pq3-etsec2-grp2-0.dtsi"
		/include/ "pq3-etsec2-grp2-1.dtsi"

arch/powerpc/boot/dts/fsl/p1022si-pre.dtsi

0 → 100644

+68 −0

Original line number	Diff line number	Diff line
		/*
		* P1022/P1013 Silicon/SoC Device Tree Source (pre include)
		*
		* Copyright 2011 Freescale Semiconductor Inc.
		*
		* Redistribution and use in source and binary forms, with or without
		* modification, are permitted provided that the following conditions are met:
		* * Redistributions of source code must retain the above copyright
		* notice, this list of conditions and the following disclaimer.
		* * Redistributions in binary form must reproduce the above copyright
		* notice, this list of conditions and the following disclaimer in the
		* documentation and/or other materials provided with the distribution.
		* * Neither the name of Freescale Semiconductor nor the
		* names of its contributors may be used to endorse or promote products
		* derived from this software without specific prior written permission.
		*
		*
		* ALTERNATIVELY, this software may be distributed under the terms of the
		* GNU General Public License ("GPL") as published by the Free Software
		* Foundation, either version 2 of that License or (at your option) any
		* later version.
		*
		* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
		* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
		* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
		* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
		* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
		* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
		* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
		* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
		* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
		* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
		*/

		/dts-v1/;
		/ {
		compatible = "fsl,P1022";
		#address-cells = <2>;
		#size-cells = <2>;
		interrupt-parent = <&mpic>;

		aliases {
		serial0 = &serial0;
		serial1 = &serial1;
		ethernet0 = &enet0;
		ethernet1 = &enet1;
		pci0 = &pci0;
		pci1 = &pci1;
		pci2 = &pci2;
		};

		cpus {
		#address-cells = <1>;
		#size-cells = <0>;

		PowerPC,P1022@0 {
		device_type = "cpu";
		reg = <0x0>;
		next-level-cache = <&L2>;
		};

		PowerPC,P1022@1 {
		device_type = "cpu";
		reg = <0x1>;
		next-level-cache = <&L2>;
		};
		};
		};

arch/powerpc/boot/dts/p1022ds.dts

+17 −418

Original line number	Diff line number	Diff line
		@@ -8,55 +8,20 @@
		* kind, whether express or implied.
		*/

		/dts-v1/;
		/include/ "fsl/p1022si-pre.dtsi"
		/ {
		model = "fsl,P1022";
		model = "fsl,P1022DS";
		compatible = "fsl,P1022DS";
		#address-cells = <2>;
		#size-cells = <2>;
		interrupt-parent = <&mpic>;

		aliases {
		ethernet0 = &enet0;
		ethernet1 = &enet1;
		serial0 = &serial0;
		serial1 = &serial1;
		pci0 = &pci0;
		pci1 = &pci1;
		pci2 = &pci2;
		};

		cpus {
		#address-cells = <1>;
		#size-cells = <0>;

		PowerPC,P1022@0 {
		device_type = "cpu";
		reg = <0x0>;
		next-level-cache = <&L2>;
		};

		PowerPC,P1022@1 {
		device_type = "cpu";
		reg = <0x1>;
		next-level-cache = <&L2>;
		};
		};

		memory {
		device_type = "memory";
		};

		localbus@fffe05000 {
		#address-cells = <2>;
		#size-cells = <1>;
		compatible = "fsl,p1022-elbc", "fsl,elbc", "simple-bus";
		reg = <0 0xffe05000 0 0x1000>;
		interrupts = <19 2 0 0>;

		lbc: localbus@fffe05000 {
		reg = <0xf 0xffe05000 0 0x1000>;
		ranges = <0x0 0x0 0xf 0xe8000000 0x08000000
		0x1 0x0 0xf 0xe0000000 0x08000000
		0x2 0x0 0x0 0xffa00000 0x00040000
		0x2 0x0 0xf 0xffa00000 0x00040000
		0x3 0x0 0xf 0xffdf0000 0x00008000>;

		nor@0,0 {
		@@ -161,51 +126,10 @@
		};
		};

		soc@fffe00000 {
		#address-cells = <1>;
		#size-cells = <1>;
		device_type = "soc";
		compatible = "fsl,p1022-immr", "simple-bus";
		soc: soc@fffe00000 {
		ranges = <0x0 0xf 0xffe00000 0x100000>;
		bus-frequency = <0>; // Filled out by uboot.

		ecm-law@0 {
		compatible = "fsl,ecm-law";
		reg = <0x0 0x1000>;
		fsl,num-laws = <12>;
		};

		ecm@1000 {
		compatible = "fsl,p1022-ecm", "fsl,ecm";
		reg = <0x1000 0x1000>;
		interrupts = <16 2 0 0>;
		};

		memory-controller@2000 {
		compatible = "fsl,p1022-memory-controller";
		reg = <0x2000 0x1000>;
		interrupts = <16 2 0 0>;
		};

		i2c@3000 {
		#address-cells = <1>;
		#size-cells = <0>;
		cell-index = <0>;
		compatible = "fsl-i2c";
		reg = <0x3000 0x100>;
		interrupts = <43 2 0 0>;
		dfsrr;
		};

		i2c@3100 {
		#address-cells = <1>;
		#size-cells = <0>;
		cell-index = <1>;
		compatible = "fsl-i2c";
		reg = <0x3100 0x100>;
		interrupts = <43 2 0 0>;
		dfsrr;

		wm8776:codec@1a {
		compatible = "wlf,wm8776";
		reg = <0x1a>;
		@@ -216,41 +140,14 @@
		};
		};

		serial0: serial@4500 {
		cell-index = <0>;
		device_type = "serial";
		compatible = "ns16550";
		reg = <0x4500 0x100>;
		clock-frequency = <0>;
		interrupts = <42 2 0 0>;
		};

		serial1: serial@4600 {
		cell-index = <1>;
		device_type = "serial";
		compatible = "ns16550";
		reg = <0x4600 0x100>;
		clock-frequency = <0>;
		interrupts = <42 2 0 0>;
		};

		spi@7000 {
		cell-index = <0>;
		#address-cells = <1>;
		#size-cells = <0>;
		compatible = "fsl,espi";
		reg = <0x7000 0x1000>;
		interrupts = <59 0x2 0 0>;
		espi,num-ss-bits = <4>;
		mode = "cpu";

		fsl_m25p80@0 {
		flash@0 {
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "fsl,espi-flash";
		compatible = "spansion,s25sl12801";
		reg = <0>;
		linux,modalias = "fsl_m25p80";
		spi-max-frequency = <40000000>; /* input clock */

		partition@0 {
		label = "u-boot-spi";
		reg = <0x00000000 0x00100000>;
		@@ -274,115 +171,20 @@
		};

		ssi@15000 {
		compatible = "fsl,mpc8610-ssi";
		cell-index = <0>;
		reg = <0x15000 0x100>;
		interrupts = <75 2 0 0>;
		fsl,mode = "i2s-slave";
		codec-handle = <&wm8776>;
		fsl,playback-dma = <&dma00>;
		fsl,capture-dma = <&dma01>;
		fsl,fifo-depth = <15>;
		fsl,ssi-asynchronous;
		};

		dma@c300 {
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "fsl,eloplus-dma";
		reg = <0xc300 0x4>;
		ranges = <0x0 0xc100 0x200>;
		cell-index = <1>;
		dma00: dma-channel@0 {
		compatible = "fsl,ssi-dma-channel";
		reg = <0x0 0x80>;
		cell-index = <0>;
		interrupts = <76 2 0 0>;
		};
		dma01: dma-channel@80 {
		compatible = "fsl,ssi-dma-channel";
		reg = <0x80 0x80>;
		cell-index = <1>;
		interrupts = <77 2 0 0>;
		};
		dma-channel@100 {
		compatible = "fsl,eloplus-dma-channel";
		reg = <0x100 0x80>;
		cell-index = <2>;
		interrupts = <78 2 0 0>;
		};
		dma-channel@180 {
		compatible = "fsl,eloplus-dma-channel";
		reg = <0x180 0x80>;
		cell-index = <3>;
		interrupts = <79 2 0 0>;
		};
		};

		gpio: gpio-controller@f000 {
		#gpio-cells = <2>;
		compatible = "fsl,mpc8572-gpio";
		reg = <0xf000 0x100>;
		interrupts = <47 0x2 0 0>;
		gpio-controller;
		};

		L2: l2-cache-controller@20000 {
		compatible = "fsl,p1022-l2-cache-controller";
		reg = <0x20000 0x1000>;
		cache-line-size = <32>; // 32 bytes
		cache-size = <0x40000>; // L2, 256K
		interrupts = <16 2 0 0>;
		};

		dma@21300 {
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "fsl,eloplus-dma";
		reg = <0x21300 0x4>;
		ranges = <0x0 0x21100 0x200>;
		cell-index = <0>;
		dma-channel@0 {
		compatible = "fsl,eloplus-dma-channel";
		reg = <0x0 0x80>;
		cell-index = <0>;
		interrupts = <20 2 0 0>;
		};
		dma-channel@80 {
		compatible = "fsl,eloplus-dma-channel";
		reg = <0x80 0x80>;
		cell-index = <1>;
		interrupts = <21 2 0 0>;
		};
		dma-channel@100 {
		compatible = "fsl,eloplus-dma-channel";
		reg = <0x100 0x80>;
		cell-index = <2>;
		interrupts = <22 2 0 0>;
		};
		dma-channel@180 {
		compatible = "fsl,eloplus-dma-channel";
		reg = <0x180 0x80>;
		cell-index = <3>;
		interrupts = <23 2 0 0>;
		};
		};

		usb@22000 {
		#address-cells = <1>;
		#size-cells = <0>;
		compatible = "fsl-usb2-dr";
		reg = <0x22000 0x1000>;
		interrupts = <28 0x2 0 0>;
		phy_type = "ulpi";
		};

		mdio@24000 {
		#address-cells = <1>;
		#size-cells = <0>;
		compatible = "fsl,etsec2-mdio";
		reg = <0x24000 0x1000 0xb0030 0x4>;
		usb@23000 {
		status = "disabled";
		};

		mdio@24000 {
		phy0: ethernet-phy@0 {
		interrupts = <3 1 0 0>;
		reg = <0x1>;
		@@ -393,187 +195,22 @@
		};
		};

		mdio@25000 {
		#address-cells = <1>;
		#size-cells = <0>;
		compatible = "fsl,etsec2-mdio";
		reg = <0x25000 0x1000 0xb1030 0x4>;
		};

		enet0: ethernet@B0000 {
		#address-cells = <1>;
		#size-cells = <1>;
		cell-index = <0>;
		device_type = "network";
		model = "eTSEC";
		compatible = "fsl,etsec2";
		fsl,num_rx_queues = <0x8>;
		fsl,num_tx_queues = <0x8>;
		fsl,magic-packet;
		fsl,wake-on-filer;
		local-mac-address = [ 00 00 00 00 00 00 ];
		ethernet@b0000 {
		phy-handle = <&phy0>;
		phy-connection-type = "rgmii-id";
		queue-group@0{
		#address-cells = <1>;
		#size-cells = <1>;
		reg = <0xB0000 0x1000>;
		interrupts = <29 2 0 0 30 2 0 0 34 2 0 0>;
		};
		queue-group@1{
		#address-cells = <1>;
		#size-cells = <1>;
		reg = <0xB4000 0x1000>;
		interrupts = <17 2 0 0 18 2 0 0 24 2 0 0>;
		};
		};

		enet1: ethernet@B1000 {
		#address-cells = <1>;
		#size-cells = <1>;
		cell-index = <0>;
		device_type = "network";
		model = "eTSEC";
		compatible = "fsl,etsec2";
		fsl,num_rx_queues = <0x8>;
		fsl,num_tx_queues = <0x8>;
		local-mac-address = [ 00 00 00 00 00 00 ];
		ethernet@b1000 {
		phy-handle = <&phy1>;
		phy-connection-type = "rgmii-id";
		queue-group@0{
		#address-cells = <1>;
		#size-cells = <1>;
		reg = <0xB1000 0x1000>;
		interrupts = <35 2 0 0 36 2 0 0 40 2 0 0>;
		};
		queue-group@1{
		#address-cells = <1>;
		#size-cells = <1>;
		reg = <0xB5000 0x1000>;
		interrupts = <51 2 0 0 52 2 0 0 67 2 0 0>;
		};
		};

		sdhci@2e000 {
		compatible = "fsl,p1022-esdhc", "fsl,esdhc";
		reg = <0x2e000 0x1000>;
		interrupts = <72 0x2 0 0>;
		fsl,sdhci-auto-cmd12;
		/* Filled in by U-Boot */
		clock-frequency = <0>;
		};

		crypto@30000 {
		compatible = "fsl,sec3.3", "fsl,sec3.1", "fsl,sec3.0",
		"fsl,sec2.4", "fsl,sec2.2", "fsl,sec2.1",
		"fsl,sec2.0";
		reg = <0x30000 0x10000>;
		interrupts = <45 2 0 0 58 2 0 0>;
		fsl,num-channels = <4>;
		fsl,channel-fifo-len = <24>;
		fsl,exec-units-mask = <0x97c>;
		fsl,descriptor-types-mask = <0x3a30abf>;
		};

		sata@18000 {
		compatible = "fsl,p1022-sata", "fsl,pq-sata-v2";
		reg = <0x18000 0x1000>;
		cell-index = <1>;
		interrupts = <74 0x2 0 0>;
		};

		sata@19000 {
		compatible = "fsl,p1022-sata", "fsl,pq-sata-v2";
		reg = <0x19000 0x1000>;
		cell-index = <2>;
		interrupts = <41 0x2 0 0>;
		};

		power@e0070{
		compatible = "fsl,mpc8536-pmc", "fsl,mpc8548-pmc";
		reg = <0xe0070 0x20>;
		};

		display@10000 {
		compatible = "fsl,diu", "fsl,p1022-diu";
		reg = <0x10000 1000>;
		interrupts = <64 2 0 0>;
		};

		timer@41100 {
		compatible = "fsl,mpic-global-timer";
		reg = <0x41100 0x100 0x41300 4>;
		interrupts = <0 0 3 0
		1 0 3 0
		2 0 3 0
		3 0 3 0>;
		};

		timer@42100 {
		compatible = "fsl,mpic-global-timer";
		reg = <0x42100 0x100 0x42300 4>;
		interrupts = <4 0 3 0
		5 0 3 0
		6 0 3 0
		7 0 3 0>;
		};

		mpic: pic@40000 {
		interrupt-controller;
		#address-cells = <0>;
		#interrupt-cells = <4>;
		reg = <0x40000 0x40000>;
		compatible = "fsl,mpic";
		device_type = "open-pic";
		};

		msi@41600 {
		compatible = "fsl,p1022-msi", "fsl,mpic-msi";
		reg = <0x41600 0x80>;
		msi-available-ranges = <0 0x100>;
		interrupts = <
		0xe0 0 0 0
		0xe1 0 0 0
		0xe2 0 0 0
		0xe3 0 0 0
		0xe4 0 0 0
		0xe5 0 0 0
		0xe6 0 0 0
		0xe7 0 0 0>;
		};

		global-utilities@e0000 { //global utilities block
		compatible = "fsl,p1022-guts";
		reg = <0xe0000 0x1000>;
		fsl,has-rstcr;
		};
		};

		pci0: pcie@fffe09000 {
		compatible = "fsl,p1022-pcie";
		device_type = "pci";
		#interrupt-cells = <1>;
		#size-cells = <2>;
		#address-cells = <3>;
		reg = <0xf 0xffe09000 0 0x1000>;
		bus-range = <0 255>;
		ranges = <0x2000000 0x0 0xa0000000 0xc 0x20000000 0x0 0x20000000
		0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
		clock-frequency = <33333333>;
		interrupts = <16 2 0 0>;
		interrupt-map-mask = <0xf800 0 0 7>;
		interrupt-map = <
		/* IDSEL 0x0 */
		0000 0 0 1 &mpic 4 1
		0000 0 0 2 &mpic 5 1
		0000 0 0 3 &mpic 6 1
		0000 0 0 4 &mpic 7 1
		>;
		pcie@0 {
		reg = <0x0 0x0 0x0 0x0 0x0>;
		#size-cells = <2>;
		#address-cells = <3>;
		device_type = "pci";
		ranges = <0x2000000 0x0 0xe0000000
		0x2000000 0x0 0xe0000000
		0x0 0x20000000
		@@ -585,30 +222,11 @@
		};

		pci1: pcie@fffe0a000 {
		compatible = "fsl,p1022-pcie";
		device_type = "pci";
		#interrupt-cells = <1>;
		#size-cells = <2>;
		#address-cells = <3>;
		reg = <0xf 0xffe0a000 0 0x1000>;
		bus-range = <0 255>;
		ranges = <0x2000000 0x0 0xc0000000 0xc 0x40000000 0x0 0x20000000
		0x1000000 0x0 0x00000000 0xf 0xffc20000 0x0 0x10000>;
		clock-frequency = <33333333>;
		interrupts = <16 2 0 0>;
		interrupt-map-mask = <0xf800 0 0 7>;
		interrupt-map = <
		/* IDSEL 0x0 */
		0000 0 0 1 &mpic 0 1
		0000 0 0 2 &mpic 1 1
		0000 0 0 3 &mpic 2 1
		0000 0 0 4 &mpic 3 1
		>;
		pcie@0 {
		reg = <0x0 0x0 0x0 0x0 0x0>;
		#size-cells = <2>;
		#address-cells = <3>;
		device_type = "pci";
		ranges = <0x2000000 0x0 0xe0000000
		0x2000000 0x0 0xe0000000
		0x0 0x20000000
		@@ -619,32 +237,11 @@
		};
		};


		pci2: pcie@fffe0b000 {
		compatible = "fsl,p1022-pcie";
		device_type = "pci";
		#interrupt-cells = <1>;
		#size-cells = <2>;
		#address-cells = <3>;
		reg = <0xf 0xffe0b000 0 0x1000>;
		bus-range = <0 255>;
		ranges = <0x2000000 0x0 0x80000000 0xc 0x00000000 0x0 0x20000000
		0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
		clock-frequency = <33333333>;
		interrupts = <16 2 0 0>;
		interrupt-map-mask = <0xf800 0 0 7>;
		interrupt-map = <
		/* IDSEL 0x0 */
		0000 0 0 1 &mpic 8 1
		0000 0 0 2 &mpic 9 1
		0000 0 0 3 &mpic 10 1
		0000 0 0 4 &mpic 11 1
		>;
		pcie@0 {
		reg = <0x0 0x0 0x0 0x0 0x0>;
		#size-cells = <2>;
		#address-cells = <3>;
		device_type = "pci";
		ranges = <0x2000000 0x0 0xe0000000
		0x2000000 0x0 0xe0000000
		0x0 0x20000000
		@@ -655,3 +252,5 @@
		};
		};
		};

		/include/ "fsl/p1022si-post.dtsi"

Admin message