Merge tag 'drm/panel/for-4.12-rc1' of git://anongit.freedesktop.org/tegra/linux into drm-next

Ampire AM-480272H3TMQW-T01H 4.3" WQVGA TFT LCD panel

This binding is compatible with the simple-panel binding, which is specified

in simple-panel.txt in this directory.

Required properties:

- compatible: should be "ampire,am-480272h3tmqw-t01h"

Optional properties:

- power-supply: regulator to provide the supply voltage

- enable-gpios: GPIO pin to enable or disable the panel

- backlight: phandle of the backlight device attached to the panel

Optional nodes:

- Video port for RGB input.

Example:

	panel_rgb: panel-rgb {

		compatible = "ampire,am-480272h3tmqw-t01h";

		enable-gpios = <&gpioa 8 1>;

		port {

			panel_in_rgb: endpoint {

				remote-endpoint = <&controller_out_rgb>;

			};

		};

	};

Samsung S6E3HA2 5.7" 1440x2560 AMOLED panel

Required properties:

  - compatible: "samsung,s6e3ha2"

  - reg: the virtual channel number of a DSI peripheral

  - vdd3-supply: I/O voltage supply

  - vci-supply: voltage supply for analog circuits

  - reset-gpios: a GPIO spec for the reset pin (active low)

  - enable-gpios: a GPIO spec for the panel enable pin (active high)

Optional properties:

  - te-gpios: a GPIO spec for the tearing effect synchronization signal

    gpio pin (active high)

Example:

&dsi {

	...

	panel@0 {

		compatible = "samsung,s6e3ha2";

		reg = <0>;

		vdd3-supply = <&ldo27_reg>;

		vci-supply = <&ldo28_reg>;

		reset-gpios = <&gpg0 0 GPIO_ACTIVE_LOW>;

		enable-gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>;

		te-gpios = <&gpf1 3 GPIO_ACTIVE_HIGH>;

	};

};

Sitronix ST7789V RGB panel with SPI control bus

Required properties:

  - compatible: "sitronix,st7789v"

  - reg: Chip select of the panel on the SPI bus

  - reset-gpios: a GPIO phandle for the reset pin

  - power-supply: phandle of the regulator that provides the supply voltage

Optional properties:

  - backlight: phandle to the backlight used

The generic bindings for the SPI slaves documented in [1] also applies

The device node can contain one 'port' child node with one child

'endpoint' node, according to the bindings defined in [2]. This

node should describe panel's video bus.

[1]: Documentation/devicetree/bindings/spi/spi-bus.txt

[2]: Documentation/devicetree/bindings/graph.txt

Example:

panel@0 {

	compatible = "sitronix,st7789v";

	reg = <0>;

	reset-gpios = <&pio 6 11 GPIO_ACTIVE_LOW>;

	backlight = <&pwm_bl>;

	spi-max-frequency = <100000>;

	spi-cpol;

	spi-cpha;

	port {

		panel_input: endpoint {

			remote-endpoint = <&tcon0_out_panel>;

		};

	};

};

Winstar Display Corporation 3.5" QVGA (320x240) TFT LCD panel

Required properties:

- compatible: should be "winstar,wf35ltiacd"

- power-supply: regulator to provide the VCC supply voltage (3.3 volts)

This binding is compatible with the simple-panel binding, which is specified

in simple-panel.txt in this directory.

Example:

	backlight: backlight {

		compatible = "pwm-backlight";

		pwms = <&hlcdc_pwm 0 50000 PWM_POLARITY_INVERTED>;

		brightness-levels = <0 31 63 95 127 159 191 223 255>;

		default-brightness-level = <191>;

		power-supply = <&bl_reg>;

	};

	bl_reg: backlight_regulator {

		compatible = "regulator-fixed";

		regulator-name = "backlight-power-supply";

		regulator-min-microvolt = <5000000>;

		regulator-max-microvolt = <5000000>;

	};

	panel: panel {

		compatible = "winstar,wf35ltiacd", "simple-panel";

		backlight = <&backlight>;

		power-supply = <&panel_reg>;

		#address-cells = <1>;

		#size-cells = <0>;

		port {

			#address-cells = <1>;

			#size-cells = <0>;

			panel_input: endpoint {

				remote-endpoint = <&hlcdc_panel_output>;

			};

		};

	};

	panel_reg: panel_regulator {

		compatible = "regulator-fixed";

		regulator-name = "panel-power-supply";

		regulator-min-microvolt = <3300000>;

		regulator-max-microvolt = <3300000>;

	};

wetek	WeTek Electronics, limited.

wexler	Wexler

winbond Winbond Electronics corp.

winstar	Winstar Display Corp.

wlf	Wolfson Microelectronics

wm	Wondermedia Technologies, Inc.

x-powers	X-Powers