Unverified Commit a97e384b authored by Lubomir Rintel's avatar Lubomir Rintel Committed by Mark Brown
Browse files

ASoC: mmp-sspa: Add Device Tree support 



This makes it possible to select CONFIG_SND_MMP_SOC_SSPA directly, as
opposed to via CONFIG_SND_MMP_SOC, and for the driver to bind to a device
tree node. That makes the driver useful on Device Tree based systems,
with audio-graph-card or simple-card.

The aforementioned card drivers control the master clock themselves and
don't call the set_dai_sysclk() or set_dai_pll(), thus the respective
handlers don't serve any purpose anymore. Instead, they return early and
the hw_params() handler sets the appropriate bitclk itself.

The register range is split into two -- for the RX block and for the TX
block. On a MMP2 there are two pairs of them; the first one has the
clock controller in the middle, while the second just has a hole:

  0xd42a0c00 - 0xd42a0c30 RX1
  0xd42a0c30 - 0xd42a0c40 Clocks
  0xd42a0c80 - 0xd42a0cb0 TX1
  0xd42a0d00 - 0xd42a0d30 RX2
  0xd42a0d80 - 0xd42a0cb0 TX2

For this reason, mmp_sspa_write_reg() and mmp_sspa_read_reg() are
replaced with direct calls to I/O routines.

Tested on a MMP2-based OLPC XO-1.75 laptop with rt5631 coded, mmp_tdma DMA
engine and MMP2 clock controller glued together with audio-graph-card.

Signed-off-by: default avatarLubomir Rintel <lkundrak@v3.sk>
Link: https://lore.kernel.org/r/20200511210134.1224532-12-lkundrak@v3.sk


Signed-off-by: default avatarMark Brown <broonie@kernel.org>
parent ce595586

sound/soc/pxa/Kconfig

+10 −10
Original line number Diff line number Diff line
@@ -9,14 +9,8 @@ config SND_PXA2XX_SOC 
	  to select the audio interfaces to support below.



config SND_MMP_SOC

	bool "Soc Audio for Marvell MMP chips"

	depends on ARCH_MMP

	bool

	select MMP_SRAM

	select SND_SOC_GENERIC_DMAENGINE_PCM

	select SND_ARM

	help

	  Say Y if you want to add support for codecs attached to

	  the MMP SSPA interface.



config SND_PXA2XX_AC97

	tristate
@@ -39,7 +33,13 @@ config SND_PXA_SOC_SSP 
	select SND_PXA2XX_LIB



config SND_MMP_SOC_SSPA

	tristate

	tristate "SoC Audio via MMP SSPA ports"

	depends on ARCH_MMP

	select SND_SOC_GENERIC_DMAENGINE_PCM

	select SND_ARM

	help

	  Say Y if you want to add support for codecs attached to

	  the MMP SSPA interface.



config SND_PXA2XX_SOC_CORGI

	tristate "SoC Audio support for Sharp Zaurus SL-C7x0"
@@ -232,8 +232,8 @@ config SND_PXA2XX_SOC_IMOTE2 


config SND_MMP_SOC_BROWNSTONE

	tristate "SoC Audio support for Marvell Brownstone"

	depends on SND_MMP_SOC && MACH_BROWNSTONE && I2C

	select SND_MMP_SOC_SSPA

	depends on SND_MMP_SOC_SSPA && MACH_BROWNSTONE && I2C

	select SND_MMP_SOC

	select MFD_WM8994

	select SND_SOC_WM8994

	help

sound/soc/pxa/mmp-sspa.c

+94 −45
Original line number Diff line number Diff line
@@ -28,27 +28,20 @@ 
 * SSPA audio private data

 */

struct sspa_priv {

	void __iomem *mmio_base;

	void __iomem *tx_base;

	void __iomem *rx_base;



	struct snd_dmaengine_dai_dma_data playback_dma_data;

	struct snd_dmaengine_dai_dma_data capture_dma_data;

	struct clk *clk;

	struct clk *audio_clk;

	struct clk *sysclk;



	int running_cnt;

	u32 sp;

	u32 ctrl;

};



static void mmp_sspa_write_reg(struct sspa_priv *sspa, u32 reg, u32 val)

{

	__raw_writel(val, sspa->mmio_base + reg);

}



static u32 mmp_sspa_read_reg(struct sspa_priv *sspa, u32 reg)

{

	return __raw_readl(sspa->mmio_base + reg);

}



static void mmp_sspa_tx_enable(struct sspa_priv *sspa)

{

	unsigned int sspa_sp = sspa->sp;
@@ -56,7 +49,7 @@ static void mmp_sspa_tx_enable(struct sspa_priv *sspa) 
	sspa_sp &= ~SSPA_SP_MSL;

	sspa_sp |= SSPA_SP_S_EN;

	sspa_sp |= SSPA_SP_WEN;

	mmp_sspa_write_reg(sspa, SSPA_TXSP, sspa_sp);

	__raw_writel(sspa_sp, sspa->tx_base + SSPA_SP);

}



static void mmp_sspa_tx_disable(struct sspa_priv *sspa)
@@ -66,7 +59,7 @@ static void mmp_sspa_tx_disable(struct sspa_priv *sspa) 
	sspa_sp &= ~SSPA_SP_MSL;

	sspa_sp &= ~SSPA_SP_S_EN;

	sspa_sp |= SSPA_SP_WEN;

	mmp_sspa_write_reg(sspa, SSPA_TXSP, sspa_sp);

	__raw_writel(sspa_sp, sspa->tx_base + SSPA_SP);

}



static void mmp_sspa_rx_enable(struct sspa_priv *sspa)
@@ -75,7 +68,7 @@ static void mmp_sspa_rx_enable(struct sspa_priv *sspa) 


	sspa_sp |= SSPA_SP_S_EN;

	sspa_sp |= SSPA_SP_WEN;

	mmp_sspa_write_reg(sspa, SSPA_RXSP, sspa_sp);

	__raw_writel(sspa_sp, sspa->rx_base + SSPA_SP);

}



static void mmp_sspa_rx_disable(struct sspa_priv *sspa)
@@ -84,7 +77,7 @@ static void mmp_sspa_rx_disable(struct sspa_priv *sspa) 


	sspa_sp &= ~SSPA_SP_S_EN;

	sspa_sp |= SSPA_SP_WEN;

	mmp_sspa_write_reg(sspa, SSPA_RXSP, sspa_sp);

	__raw_writel(sspa_sp, sspa->rx_base + SSPA_SP);

}



static int mmp_sspa_startup(struct snd_pcm_substream *substream,
@@ -105,7 +98,6 @@ static void mmp_sspa_shutdown(struct snd_pcm_substream *substream, 


	clk_disable_unprepare(sspa->clk);

	clk_disable_unprepare(sspa->sysclk);



}



/*
@@ -115,8 +107,12 @@ static int mmp_sspa_set_dai_sysclk(struct snd_soc_dai *cpu_dai, 
				    int clk_id, unsigned int freq, int dir)

{

	struct sspa_priv *sspa = snd_soc_dai_get_drvdata(cpu_dai);

	struct device *dev = cpu_dai->component->dev;

	int ret = 0;



	if (dev->of_node)

		return -ENOTSUPP;



	switch (clk_id) {

	case MMP_SSPA_CLK_AUDIO:

		ret = clk_set_rate(sspa->audio_clk, freq);
@@ -139,8 +135,12 @@ static int mmp_sspa_set_dai_pll(struct snd_soc_dai *cpu_dai, int pll_id, 
				 unsigned int freq_out)

{

	struct sspa_priv *sspa = snd_soc_dai_get_drvdata(cpu_dai);

	struct device *dev = cpu_dai->component->dev;

	int ret = 0;



	if (dev->of_node)

		return -ENOTSUPP;



	switch (pll_id) {

	case MMP_SYSCLK:

		ret = clk_set_rate(sspa->sysclk, freq_out);
@@ -213,6 +213,7 @@ static int mmp_sspa_hw_params(struct snd_pcm_substream *substream, 
			       struct snd_soc_dai *dai)

{

	struct sspa_priv *sspa = snd_soc_dai_get_drvdata(dai);

	struct device *dev = dai->component->dev;

	u32 sspa_ctrl = sspa->ctrl;

	int bits;

	int bitval;
@@ -238,7 +239,7 @@ static int mmp_sspa_hw_params(struct snd_pcm_substream *substream, 
		return -EINVAL;

	}



	if (params_channels(params) == 2)

	if (dev->of_node || params_channels(params) == 2)

		sspa_ctrl |= SSPA_CTL_XPH;



	sspa_ctrl &= ~SSPA_CTL_XWDLEN1_MASK;
@@ -256,12 +257,17 @@ static int mmp_sspa_hw_params(struct snd_pcm_substream *substream, 
	sspa->sp &= ~SSPA_TXSP_FPER_MASK;

	sspa->sp |= SSPA_TXSP_FPER(bits * 2 - 1);



	if (dev->of_node) {

		clk_set_rate(sspa->clk, params_rate(params) *

					params_channels(params) * bits);

	}



	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {

		mmp_sspa_write_reg(sspa, SSPA_TXCTL, sspa_ctrl);

		mmp_sspa_write_reg(sspa, SSPA_TXFIFO_LL, 0x1);

		__raw_writel(sspa_ctrl, sspa->tx_base + SSPA_CTL);

		__raw_writel(0x1, sspa->tx_base + SSPA_FIFO_UL);

	} else {

		mmp_sspa_write_reg(sspa, SSPA_RXCTL, sspa_ctrl);

		mmp_sspa_write_reg(sspa, SSPA_RXFIFO_UL, 0x0);

		__raw_writel(sspa_ctrl, sspa->rx_base + SSPA_CTL);

		__raw_writel(0x0, sspa->rx_base + SSPA_FIFO_UL);

	}



	return 0;
@@ -410,19 +416,19 @@ static int mmp_sspa_open(struct snd_soc_component *component, 
	pm_runtime_get_sync(component->dev);



	/* we can only change the settings if the port is not in use */

	if ((mmp_sspa_read_reg(sspa, SSPA_TXSP) & SSPA_SP_S_EN) ||

	    (mmp_sspa_read_reg(sspa, SSPA_RXSP) & SSPA_SP_S_EN)) {

	if ((__raw_readl(sspa->tx_base + SSPA_SP) & SSPA_SP_S_EN) ||

	    (__raw_readl(sspa->rx_base + SSPA_SP) & SSPA_SP_S_EN)) {

		dev_err(component->dev,

			"can't change hardware dai format: stream is in use\n");

		return -EBUSY;

	}



	mmp_sspa_write_reg(sspa, SSPA_TXSP, sspa->sp);

	mmp_sspa_write_reg(sspa, SSPA_RXSP, sspa->sp);

	__raw_writel(sspa->sp, sspa->tx_base + SSPA_SP);

	__raw_writel(sspa->sp, sspa->rx_base + SSPA_SP);



	sspa->sp &= ~(SSPA_SP_S_RST | SSPA_SP_FFLUSH);

	mmp_sspa_write_reg(sspa, SSPA_TXSP, sspa->sp);

	mmp_sspa_write_reg(sspa, SSPA_RXSP, sspa->sp);

	__raw_writel(sspa->sp, sspa->tx_base + SSPA_SP);

	__raw_writel(sspa->sp, sspa->rx_base + SSPA_SP);



	/*

	 * FIXME: hw issue, for the tx serial port,
@@ -431,10 +437,10 @@ static int mmp_sspa_open(struct snd_soc_component *component, 
	 * The master/slave mode has been set in the

	 * rx port.

	 */

	mmp_sspa_write_reg(sspa, SSPA_TXSP, sspa->sp & ~SSPA_SP_MSL);

	__raw_writel(sspa->sp & ~SSPA_SP_MSL, sspa->tx_base + SSPA_SP);



	mmp_sspa_write_reg(sspa, SSPA_TXCTL, sspa->ctrl);

	mmp_sspa_write_reg(sspa, SSPA_RXCTL, sspa->ctrl);

	__raw_writel(sspa->ctrl, sspa->tx_base + SSPA_CTL);

	__raw_writel(sspa->ctrl, sspa->rx_base + SSPA_CTL);



	return 0;

}
@@ -462,9 +468,37 @@ static int asoc_mmp_sspa_probe(struct platform_device *pdev) 
	if (!sspa)

		return -ENOMEM;



	sspa->mmio_base = devm_platform_ioremap_resource(pdev, 0);

	if (IS_ERR(sspa->mmio_base))

		return PTR_ERR(sspa->mmio_base);

	if (pdev->dev.of_node) {

		sspa->rx_base = devm_platform_ioremap_resource(pdev, 0);

		if (IS_ERR(sspa->rx_base))

			return PTR_ERR(sspa->rx_base);



		sspa->tx_base = devm_platform_ioremap_resource(pdev, 1);

		if (IS_ERR(sspa->tx_base))

			return PTR_ERR(sspa->tx_base);



		sspa->clk = devm_clk_get(&pdev->dev, "bitclk");

		if (IS_ERR(sspa->clk))

			return PTR_ERR(sspa->clk);



		sspa->audio_clk = devm_clk_get(&pdev->dev, "audio");

		if (IS_ERR(sspa->audio_clk))

			return PTR_ERR(sspa->audio_clk);

	} else {

		struct resource *res;



		res = platform_get_resource(pdev, IORESOURCE_IO, 0);

		if (res == NULL)

			return -ENODEV;



		sspa->rx_base = devm_ioremap(&pdev->dev, res->start, 0x30);

		if (IS_ERR(sspa->rx_base))

			return PTR_ERR(sspa->rx_base);



		sspa->tx_base = devm_ioremap(&pdev->dev,

					     res->start + 0x80, 0x30);

		if (IS_ERR(sspa->tx_base))

			return PTR_ERR(sspa->tx_base);



		sspa->clk = devm_clk_get(&pdev->dev, NULL);

		if (IS_ERR(sspa->clk))
@@ -479,6 +513,7 @@ static int asoc_mmp_sspa_probe(struct platform_device *pdev) 
			clk_put(sspa->audio_clk);

			return PTR_ERR(sspa->sysclk);

		}

	}

	pm_runtime_enable(&pdev->dev);

	clk_prepare_enable(sspa->audio_clk);

	platform_set_drvdata(pdev, sspa);
@@ -486,8 +521,8 @@ static int asoc_mmp_sspa_probe(struct platform_device *pdev) 
	sspa->playback_dma_data.maxburst = 4;

	sspa->capture_dma_data.maxburst = 4;

	/* You know, these addresses are actually ignored. */

	sspa->playback_dma_data.addr = SSPA_TXD;

	sspa->capture_dma_data.addr = SSPA_RXD;

	sspa->capture_dma_data.addr = SSPA_D;

	sspa->playback_dma_data.addr = 0x80 + SSPA_D;



	if (pdev->dev.of_node) {

		int ret;
@@ -508,14 +543,28 @@ static int asoc_mmp_sspa_remove(struct platform_device *pdev) 


	clk_disable_unprepare(sspa->audio_clk);

	pm_runtime_disable(&pdev->dev);



	if (pdev->dev.of_node)

		return 0;



	clk_put(sspa->audio_clk);

	clk_put(sspa->sysclk);

	return 0;

}



#ifdef CONFIG_OF

static const struct of_device_id mmp_sspa_of_match[] = {

	{ .compatible = "marvell,mmp-sspa" },

	{},

};



MODULE_DEVICE_TABLE(of, mmp_sspa_of_match);

#endif



static struct platform_driver asoc_mmp_sspa_driver = {

	.driver = {

		.name = "mmp-sspa-dai",

		.of_match_table = of_match_ptr(mmp_sspa_of_match),

	},

	.probe = asoc_mmp_sspa_probe,

	.remove = asoc_mmp_sspa_remove,

sound/soc/pxa/mmp-sspa.h

+9 −19
Original line number Diff line number Diff line
@@ -10,25 +10,15 @@ 
/*

 * SSPA Registers

 */

#define SSPA_RXD		(0x00)

#define SSPA_RXID		(0x04)

#define SSPA_RXCTL		(0x08)

#define SSPA_RXSP		(0x0c)

#define SSPA_RXFIFO_UL		(0x10)

#define SSPA_RXINT_MASK		(0x14)

#define SSPA_RXC		(0x18)

#define SSPA_RXFIFO_NOFS	(0x1c)

#define SSPA_RXFIFO_SIZE	(0x20)



#define SSPA_TXD		(0x80)

#define SSPA_TXID		(0x84)

#define SSPA_TXCTL		(0x88)

#define SSPA_TXSP		(0x8c)

#define SSPA_TXFIFO_LL		(0x90)

#define SSPA_TXINT_MASK		(0x94)

#define SSPA_TXC		(0x98)

#define SSPA_TXFIFO_NOFS	(0x9c)

#define SSPA_TXFIFO_SIZE	(0xa0)

#define SSPA_D			(0x00)

#define SSPA_ID			(0x04)

#define SSPA_CTL		(0x08)

#define SSPA_SP			(0x0c)

#define SSPA_FIFO_UL		(0x10)

#define SSPA_INT_MASK		(0x14)

#define SSPA_C			(0x18)

#define SSPA_FIFO_NOFS		(0x1c)

#define SSPA_FIFO_SIZE		(0x20)



/* SSPA Control Register */

#define	SSPA_CTL_XPH		(1 << 31)	/* Read Phase */

CRA Git | Maintained and supported by SUSTech CRA and CCSE