arm64: allwinner: H5: Add Xunlong Orange Pi Zero Plus (a7affb13) · Commits · 戴 / test

arch/arm64/boot/dts/allwinner/Makefile

+1 −0

Original line number	Diff line number	Diff line
		@@ -7,6 +7,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pine64-plus.dtb sun50i-a64-pine64.dtb
		dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-sopine-baseboard.dtb
		dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-pc2.dtb
		dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-prime.dtb
		dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-zero-plus.dtb
		dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-zero-plus2.dtb
		dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo2.dtb
		dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo-plus2.dtb

arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus.dts

0 → 100644

+143 −0

Original line number	Diff line number	Diff line
		/*
		* Copyright (C) 2016 ARM Ltd.
		* Copyright (C) 2018 Hauke Mehrtens <hauke@hauke-m.de>
		*
		* SPDX-License-Identifier: (GPL-2.0+ OR X11)
		*/

		/dts-v1/;
		#include "sun50i-h5.dtsi"

		#include <dt-bindings/gpio/gpio.h>
		#include <dt-bindings/input/input.h>
		#include <dt-bindings/pinctrl/sun4i-a10.h>

		/ {
		model = "Xunlong Orange Pi Zero Plus";
		compatible = "xunlong,orangepi-zero-plus", "allwinner,sun50i-h5";

		reg_vcc3v3: vcc3v3 {
		compatible = "regulator-fixed";
		regulator-name = "vcc3v3";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		};

		aliases {
		ethernet0 = &emac;
		ethernet1 = &rtl8189ftv;
		serial0 = &uart0;
		};

		chosen {
		stdout-path = "serial0:115200n8";
		};

		leds {
		compatible = "gpio-leds";

		pwr {
		label = "orangepi:green:pwr";
		gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PA10 */
		default-state = "on";
		};

		status {
		label = "orangepi:red:status";
		gpios = <&pio 0 17 GPIO_ACTIVE_HIGH>; /* PA17 */
		};
		};

		reg_gmac_3v3: gmac-3v3 {
		compatible = "regulator-fixed";
		regulator-name = "gmac-3v3";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		startup-delay-us = <100000>;
		enable-active-high;
		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; /* PD6 */
		};
		};

		&ehci0 {
		status = "okay";
		};

		&ehci1 {
		status = "okay";
		};

		&emac {
		pinctrl-names = "default";
		pinctrl-0 = <&emac_rgmii_pins>;
		phy-supply = <&reg_gmac_3v3>;
		phy-handle = <&ext_rgmii_phy>;
		phy-mode = "rgmii";
		status = "okay";
		};

		&external_mdio {
		ext_rgmii_phy: ethernet-phy@1 {
		compatible = "ethernet-phy-ieee802.3-c22";
		reg = <1>;
		};
		};

		&mmc0 {
		vmmc-supply = <&reg_vcc3v3>;
		bus-width = <4>;
		cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
		status = "okay";
		};

		&mmc1 {
		vmmc-supply = <&reg_vcc3v3>;
		bus-width = <4>;
		non-removable;
		status = "okay";

		/*
		* Explicitly define the sdio device, so that we can add an ethernet
		* alias for it (which e.g. makes u-boot set a mac-address).
		*/
		rtl8189ftv: sdio_wifi@1 {
		reg = <1>;
		};
		};

		&spi0 {
		status = "okay";

		flash@0 {
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "mxicy,mx25l1606e", "winbond,w25q128";
		reg = <0>;
		spi-max-frequency = <40000000>;
		};
		};

		&ohci0 {
		status = "okay";
		};

		&ohci1 {
		status = "okay";
		};

		&uart0 {
		pinctrl-names = "default";
		pinctrl-0 = <&uart0_pins_a>;
		status = "okay";
		};

		&usb_otg {
		dr_mode = "peripheral";
		status = "okay";
		};

		&usbphy {
		/* USB Type-A ports' VBUS is always on */
		usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
		status = "okay";
		};

Admin message