Commit a6ab7aa9 authored by Rafael J. Wysocki's avatar Rafael J. Wysocki
Browse files

PM / Runtime: Use device type and device class callbacks 



The power management of some devices is handled through device types
and device classes rather than through bus types.  Since these
devices may also benefit from using the run-time power management
core, extend it so that the device type and device class run-time PM
callbacks can be taken into consideration by it if the bus type
callback is not defined.

Update the run-time PM core documentation to reflect this change.

Signed-off-by: default avatarRafael J. Wysocki <rjw@sisk.pl>
parent aa0baaef

Documentation/power/runtime_pm.txt

+87 −86
Original line number Diff line number Diff line
@@ -42,80 +42,81 @@ struct dev_pm_ops { 
	...

};



The ->runtime_suspend() callback is executed by the PM core for the bus type of

the device being suspended.  The bus type's callback is then _entirely_

_responsible_ for handling the device as appropriate, which may, but need not

include executing the device driver's own ->runtime_suspend() callback (from the

The ->runtime_suspend(), ->runtime_resume() and ->runtime_idle() callbacks are

executed by the PM core for either the bus type, or device type (if the bus

type's callback is not defined), or device class (if the bus type's and device

type's callbacks are not defined) of given device.  The bus type, device type

and device class callbacks are referred to as subsystem-level callbacks in what

follows.



The subsystem-level suspend callback is _entirely_ _responsible_ for handling

the suspend of the device as appropriate, which may, but need not include

executing the device driver's own ->runtime_suspend() callback (from the

PM core's point of view it is not necessary to implement a ->runtime_suspend()

callback in a device driver as long as the bus type's ->runtime_suspend() knows

what to do to handle the device).

callback in a device driver as long as the subsystem-level suspend callback

knows what to do to handle the device).



  * Once the bus type's ->runtime_suspend() callback has completed successfully

  * Once the subsystem-level suspend callback has completed successfully

    for given device, the PM core regards the device as suspended, which need

    not mean that the device has been put into a low power state.  It is

    supposed to mean, however, that the device will not process data and will

    not communicate with the CPU(s) and RAM until its bus type's

    ->runtime_resume() callback is executed for it.  The run-time PM status of

    a device after successful execution of its bus type's ->runtime_suspend()

    callback is 'suspended'.



  * If the bus type's ->runtime_suspend() callback returns -EBUSY or -EAGAIN,

    the device's run-time PM status is supposed to be 'active', which means that

    the device _must_ be fully operational afterwards.



  * If the bus type's ->runtime_suspend() callback returns an error code

    different from -EBUSY or -EAGAIN, the PM core regards this as a fatal

    error and will refuse to run the helper functions described in Section 4

    for the device, until the status of it is directly set either to 'active'

    or to 'suspended' (the PM core provides special helper functions for this

    purpose).



In particular, if the driver requires remote wakeup capability for proper

functioning and device_run_wake() returns 'false' for the device, then

->runtime_suspend() should return -EBUSY.  On the other hand, if

device_run_wake() returns 'true' for the device and the device is put

into a low power state during the execution of its bus type's

->runtime_suspend(), it is expected that remote wake-up (i.e. hardware mechanism

allowing the device to request a change of its power state, such as PCI PME)

will be enabled for the device.  Generally, remote wake-up should be enabled

for all input devices put into a low power state at run time.



The ->runtime_resume() callback is executed by the PM core for the bus type of

the device being woken up.  The bus type's callback is then _entirely_

_responsible_ for handling the device as appropriate, which may, but need not

include executing the device driver's own ->runtime_resume() callback (from the

PM core's point of view it is not necessary to implement a ->runtime_resume()

callback in a device driver as long as the bus type's ->runtime_resume() knows

what to do to handle the device).



  * Once the bus type's ->runtime_resume() callback has completed successfully,

    the PM core regards the device as fully operational, which means that the

    device _must_ be able to complete I/O operations as needed.  The run-time

    PM status of the device is then 'active'.



  * If the bus type's ->runtime_resume() callback returns an error code, the PM

    core regards this as a fatal error and will refuse to run the helper

    functions described in Section 4 for the device, until its status is

    directly set either to 'active' or to 'suspended' (the PM core provides

    special helper functions for this purpose).



The ->runtime_idle() callback is executed by the PM core for the bus type of

given device whenever the device appears to be idle, which is indicated to the

PM core by two counters, the device's usage counter and the counter of 'active'

children of the device.

    not communicate with the CPU(s) and RAM until the subsystem-level resume

    callback is executed for it.  The run-time PM status of a device after

    successful execution of the subsystem-level suspend callback is 'suspended'.



  * If the subsystem-level suspend callback returns -EBUSY or -EAGAIN,

    the device's run-time PM status is 'active', which means that the device

    _must_ be fully operational afterwards.



  * If the subsystem-level suspend callback returns an error code different

    from -EBUSY or -EAGAIN, the PM core regards this as a fatal error and will

    refuse to run the helper functions described in Section 4 for the device,

    until the status of it is directly set either to 'active', or to 'suspended'

    (the PM core provides special helper functions for this purpose).



In particular, if the driver requires remote wake-up capability (i.e. hardware

mechanism allowing the device to request a change of its power state, such as

PCI PME) for proper functioning and device_run_wake() returns 'false' for the

device, then ->runtime_suspend() should return -EBUSY.  On the other hand, if

device_run_wake() returns 'true' for the device and the device is put into a low

power state during the execution of the subsystem-level suspend callback, it is

expected that remote wake-up will be enabled for the device.  Generally, remote

wake-up should be enabled for all input devices put into a low power state at

run time.



The subsystem-level resume callback is _entirely_ _responsible_ for handling the

resume of the device as appropriate, which may, but need not include executing

the device driver's own ->runtime_resume() callback (from the PM core's point of

view it is not necessary to implement a ->runtime_resume() callback in a device

driver as long as the subsystem-level resume callback knows what to do to handle

the device).



  * Once the subsystem-level resume callback has completed successfully, the PM

    core regards the device as fully operational, which means that the device

    _must_ be able to complete I/O operations as needed.  The run-time PM status

    of the device is then 'active'.



  * If the subsystem-level resume callback returns an error code, the PM core

    regards this as a fatal error and will refuse to run the helper functions

    described in Section 4 for the device, until its status is directly set

    either to 'active' or to 'suspended' (the PM core provides special helper

    functions for this purpose).



The subsystem-level idle callback is executed by the PM core whenever the device

appears to be idle, which is indicated to the PM core by two counters, the

device's usage counter and the counter of 'active' children of the device.



  * If any of these counters is decreased using a helper function provided by

    the PM core and it turns out to be equal to zero, the other counter is

    checked.  If that counter also is equal to zero, the PM core executes the

    device bus type's ->runtime_idle() callback (with the device as an

    argument).

    subsystem-level idle callback with the device as an argument.



The action performed by a bus type's ->runtime_idle() callback is totally

dependent on the bus type in question, but the expected and recommended action

is to check if the device can be suspended (i.e. if all of the conditions

necessary for suspending the device are satisfied) and to queue up a suspend

request for the device in that case.  The value returned by this callback is

ignored by the PM core.

The action performed by a subsystem-level idle callback is totally dependent on

the subsystem in question, but the expected and recommended action is to check

if the device can be suspended (i.e. if all of the conditions necessary for

suspending the device are satisfied) and to queue up a suspend request for the

device in that case.  The value returned by this callback is ignored by the PM

core.



The helper functions provided by the PM core, described in Section 4, guarantee

that the following constraints are met with respect to the bus type's run-time
@@ -238,41 +239,41 @@ drivers/base/power/runtime.c and include/linux/pm_runtime.h: 
      removing the device from device hierarchy



  int pm_runtime_idle(struct device *dev);

    - execute ->runtime_idle() for the device's bus type; returns 0 on success

      or error code on failure, where -EINPROGRESS means that ->runtime_idle()

      is already being executed

    - execute the subsystem-level idle callback for the device; returns 0 on

      success or error code on failure, where -EINPROGRESS means that

      ->runtime_idle() is already being executed



  int pm_runtime_suspend(struct device *dev);

    - execute ->runtime_suspend() for the device's bus type; returns 0 on

    - execute the subsystem-level suspend callback for the device; returns 0 on

      success, 1 if the device's run-time PM status was already 'suspended', or

      error code on failure, where -EAGAIN or -EBUSY means it is safe to attempt

      to suspend the device again in future



  int pm_runtime_resume(struct device *dev);

    - execute ->runtime_resume() for the device's bus type; returns 0 on

    - execute the subsystem-leve resume callback for the device; returns 0 on

      success, 1 if the device's run-time PM status was already 'active' or

      error code on failure, where -EAGAIN means it may be safe to attempt to

      resume the device again in future, but 'power.runtime_error' should be

      checked additionally



  int pm_request_idle(struct device *dev);

    - submit a request to execute ->runtime_idle() for the device's bus type

      (the request is represented by a work item in pm_wq); returns 0 on success

      or error code if the request has not been queued up

    - submit a request to execute the subsystem-level idle callback for the

      device (the request is represented by a work item in pm_wq); returns 0 on

      success or error code if the request has not been queued up



  int pm_schedule_suspend(struct device *dev, unsigned int delay);

    - schedule the execution of ->runtime_suspend() for the device's bus type

      in future, where 'delay' is the time to wait before queuing up a suspend

      work item in pm_wq, in milliseconds (if 'delay' is zero, the work item is

      queued up immediately); returns 0 on success, 1 if the device's PM

    - schedule the execution of the subsystem-level suspend callback for the

      device in future, where 'delay' is the time to wait before queuing up a

      suspend work item in pm_wq, in milliseconds (if 'delay' is zero, the work

      item is queued up immediately); returns 0 on success, 1 if the device's PM

      run-time status was already 'suspended', or error code if the request

      hasn't been scheduled (or queued up if 'delay' is 0); if the execution of

      ->runtime_suspend() is already scheduled and not yet expired, the new

      value of 'delay' will be used as the time to wait



  int pm_request_resume(struct device *dev);

    - submit a request to execute ->runtime_resume() for the device's bus type

      (the request is represented by a work item in pm_wq); returns 0 on

    - submit a request to execute the subsystem-level resume callback for the

      device (the request is represented by a work item in pm_wq); returns 0 on

      success, 1 if the device's run-time PM status was already 'active', or

      error code if the request hasn't been queued up
@@ -303,12 +304,12 @@ drivers/base/power/runtime.c and include/linux/pm_runtime.h: 
      run-time PM callbacks described in Section 2



  int pm_runtime_disable(struct device *dev);

    - prevent the run-time PM helper functions from running the device bus

      type's run-time PM callbacks, make sure that all of the pending run-time

      PM operations on the device are either completed or canceled; returns

      1 if there was a resume request pending and it was necessary to execute

      ->runtime_resume() for the device's bus type to satisfy that request,

      otherwise 0 is returned

    - prevent the run-time PM helper functions from running subsystem-level

      run-time PM callbacks for the device, make sure that all of the pending

      run-time PM operations on the device are either completed or canceled;

      returns 1 if there was a resume request pending and it was necessary to

      execute the subsystem-level resume callback for the device to satisfy that

      request, otherwise 0 is returned



  void pm_suspend_ignore_children(struct device *dev, bool enable);

    - set/unset the power.ignore_children flag of the device
@@ -378,5 +379,5 @@ pm_runtime_suspend() or pm_runtime_idle() or their asynchronous counterparts, 
they will fail returning -EAGAIN, because the device's usage counter is

incremented by the core before executing ->probe() and ->remove().  Still, it

may be desirable to suspend the device as soon as ->probe() or ->remove() has

finished, so the PM core uses pm_runtime_idle_sync() to invoke the device bus

type's ->runtime_idle() callback at that time.
 
finished, so the PM core uses pm_runtime_idle_sync() to invoke the

subsystem-level idle callback for the device at that time.

drivers/base/power/runtime.c

+45 −0
Original line number Diff line number Diff line
@@ -84,6 +84,19 @@ static int __pm_runtime_idle(struct device *dev) 


		dev->bus->pm->runtime_idle(dev);



		spin_lock_irq(&dev->power.lock);

	} else if (dev->type && dev->type->pm && dev->type->pm->runtime_idle) {

		spin_unlock_irq(&dev->power.lock);



		dev->type->pm->runtime_idle(dev);



		spin_lock_irq(&dev->power.lock);

	} else if (dev->class && dev->class->pm

	    && dev->class->pm->runtime_idle) {

		spin_unlock_irq(&dev->power.lock);



		dev->class->pm->runtime_idle(dev);



		spin_lock_irq(&dev->power.lock);

	}
@@ -192,6 +205,22 @@ int __pm_runtime_suspend(struct device *dev, bool from_wq) 


		retval = dev->bus->pm->runtime_suspend(dev);



		spin_lock_irq(&dev->power.lock);

		dev->power.runtime_error = retval;

	} else if (dev->type && dev->type->pm

	    && dev->type->pm->runtime_suspend) {

		spin_unlock_irq(&dev->power.lock);



		retval = dev->type->pm->runtime_suspend(dev);



		spin_lock_irq(&dev->power.lock);

		dev->power.runtime_error = retval;

	} else if (dev->class && dev->class->pm

	    && dev->class->pm->runtime_suspend) {

		spin_unlock_irq(&dev->power.lock);



		retval = dev->class->pm->runtime_suspend(dev);



		spin_lock_irq(&dev->power.lock);

		dev->power.runtime_error = retval;

	} else {
@@ -357,6 +386,22 @@ int __pm_runtime_resume(struct device *dev, bool from_wq) 


		retval = dev->bus->pm->runtime_resume(dev);



		spin_lock_irq(&dev->power.lock);

		dev->power.runtime_error = retval;

	} else if (dev->type && dev->type->pm

	    && dev->type->pm->runtime_resume) {

		spin_unlock_irq(&dev->power.lock);



		retval = dev->type->pm->runtime_resume(dev);



		spin_lock_irq(&dev->power.lock);

		dev->power.runtime_error = retval;

	} else if (dev->class && dev->class->pm

	    && dev->class->pm->runtime_resume) {

		spin_unlock_irq(&dev->power.lock);



		retval = dev->class->pm->runtime_resume(dev);



		spin_lock_irq(&dev->power.lock);

		dev->power.runtime_error = retval;

	} else {

CRA Git | Maintained and supported by SUSTech CRA and CCSE