arm64: dts: sun50i-a64-pinephone: Enable LCD support on PinePhone (a6a22f82) · Commits · 戴 / test

arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts

+19 −0

Original line number	Diff line number	Diff line
		@@ -9,3 +9,22 @@
		model = "Pine64 PinePhone Braveheart (1.1)";
		compatible = "pine64,pinephone-1.1", "allwinner,sun50i-a64";
		};

		&backlight {
		power-supply = <&reg_ldo_io0>;
		/*
		* PWM backlight circuit on this PinePhone revision was changed since
		* 1.0, and the lowest PWM duty cycle that doesn't lead to backlight
		* being off is around 20%. Duty cycle for the lowest brightness level
		* also varries quite a bit between individual boards, so the lowest
		* value here was chosen as a safe default.
		*/
		brightness-levels = <
		774 793 814 842
		882 935 1003 1088
		1192 1316 1462 1633
		1830 2054 2309 2596
		2916 3271 3664 4096>;
		num-interpolated-steps = <50>;
		default-brightness-level = <400>;
		};

+33 −0

Original line number	Diff line number	Diff line
		@@ -16,6 +16,13 @@
		serial0 = &uart0;
		};

		backlight: backlight {
		compatible = "pwm-backlight";
		pwms = <&r_pwm 0 50000 PWM_POLARITY_INVERTED>;
		enable-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */
		/* Backlight configuration differs per PinePhone revision. */
		};

		chosen {
		stdout-path = "serial0:115200n8";
		};
		@@ -84,6 +91,28 @@
		status = "okay";
		};

		&de {
		status = "okay";
		};

		&dphy {
		status = "okay";
		};

		&dsi {
		vcc-dsi-supply = <&reg_dldo1>;
		status = "okay";

		panel@0 {
		compatible = "xingbangda,xbd599";
		reg = <0>;
		reset-gpios = <&pio 3 23 GPIO_ACTIVE_LOW>; /* PD23 */
		iovcc-supply = <&reg_dldo2>;
		vcc-supply = <&reg_ldo_io0>;
		backlight = <&backlight>;
		};
		};

		&ehci0 {
		status = "okay";
		};
		@@ -188,6 +217,10 @@
		*/
		};

		&r_pwm {
		status = "okay";
		};

		&r_rsb {
		status = "okay";