USB: Set hub depth after USB3 hub reset (a45aa3b3) · Commits · 戴 / test

The superspeed device attached to a USB 3.0 hub(such as VIA's) doesn't respond the address device command after resume. The root cause is the superspeed hub will miss the Hub Depth value that is used as an offset into the route string to locate the bits it uses to determine the downstream port number after reset, and all packets can't be routed to the device attached to the superspeed hub. Hub driver sends a Set Hub Depth request to the superspeed hub except for USB 3.0 root hub when the hub is initialized and doesn't send the request again after reset due to the resume process. So moving the code that sends the Set Hub Depth request to the superspeed hub from hub_configure() to hub_activate() is to cover those situations include initialization and reset. The patch should be backported to kernels as old as 2.6.39. Signed-off-by:

Elric Fu <elricfu1@gmail.com> Signed-off-by:

Sarah Sharp <sarah.a.sharp@linux.intel.com> Acked-by:

Alan Stern <stern@rowland.harvard.edu> Cc: stable@vger.kernel.org

drivers/usb/core/hub.c

+17 −13

Original line number	Diff line number	Diff line
		@@ -705,10 +705,26 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
		if (type == HUB_INIT3)
		goto init3;

		/* After a resume, port power should still be on.
		/* The superspeed hub except for root hub has to use Hub Depth
		* value as an offset into the route string to locate the bits
		* it uses to determine the downstream port number. So hub driver
		* should send a set hub depth request to superspeed hub after
		* the superspeed hub is set configuration in initialization or
		* reset procedure.
		*
		* After a resume, port power should still be on.
		* For any other type of activation, turn it on.
		*/
		if (type != HUB_RESUME) {
		if (hdev->parent && hub_is_superspeed(hdev)) {
		ret = usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
		HUB_SET_DEPTH, USB_RT_HUB,
		hdev->level - 1, 0, NULL, 0,
		USB_CTRL_SET_TIMEOUT);
		if (ret < 0)
		dev_err(hub->intfdev,
		"set hub depth failed\n");
		}

		/* Speed up system boot by using a delayed_work for the
		* hub's initial power-up delays. This is pretty awkward
		@@ -987,18 +1003,6 @@ static int hub_configure(struct usb_hub *hub,
		goto fail;
		}

		if (hub_is_superspeed(hdev) && (hdev->parent != NULL)) {
		ret = usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
		HUB_SET_DEPTH, USB_RT_HUB,
		hdev->level - 1, 0, NULL, 0,
		USB_CTRL_SET_TIMEOUT);

		if (ret < 0) {
		message = "can't set hub depth";
		goto fail;
		}
		}

		/* Request the entire hub descriptor.
		* hub->descriptor can handle USB_MAXCHILDREN ports,
		* but the hub can/will return fewer bytes here.

Admin message