Commit a3f109bd authored by Sergei Shtylyov's avatar Sergei Shtylyov Committed by David S. Miller
Browse files

sh_eth: add R-Car support for real 



Commit d0418bb7 (net: sh_eth: Add eth support
for R8A7779 device) was a failed attempt to add support for one of members of
the R-Car SoC family.  That's for three reasons: it treated R8A7779 the  same
as SH7724 except including quite dirty hack adding ECMR_ELB  bit  to the mask
in sh_eth_set_rate() while not removing ECMR_RTM bit (despite it's reserved in
R-Car Ether), and it didn't add a new register offset array despite the closest
SH_ETH_REG_FAST_SH4 mapping differs by 0x200 to the offsets all the R-Car Ether
registers have, and also some of the registers in this old mapping don't exist
on R-Car Ether (due to this, SH7724's 'sh_eth_my_cpu_data' structure is not
adequeate for R-Car too).  Fix all these shortcomings, restoring the SH7724
related section to its pristine state...

Signed-off-by: default avatarSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent c0013f6f

drivers/net/ethernet/renesas/sh_eth.c

+99 −8
Original line number Diff line number Diff line
@@ -2,7 +2,8 @@ 
 *  SuperH Ethernet device driver

 *

 *  Copyright (C) 2006-2012 Nobuhiro Iwamatsu

 *  Copyright (C) 2008-2012 Renesas Solutions Corp.

 *  Copyright (C) 2008-2013 Renesas Solutions Corp.

 *  Copyright (C) 2013 Cogent Embedded, Inc.

 *

 *  This program is free software; you can redistribute it and/or modify it

 *  under the terms and conditions of the GNU General Public License,
@@ -147,6 +148,51 @@ static const u16 sh_eth_offset_gigabit[SH_ETH_MAX_REGISTER_OFFSET] = { 
	[FWALCR1]	= 0x00b4,

};



static const u16 sh_eth_offset_fast_rcar[SH_ETH_MAX_REGISTER_OFFSET] = {

	[ECMR]		= 0x0300,

	[RFLR]		= 0x0308,

	[ECSR]		= 0x0310,

	[ECSIPR]	= 0x0318,

	[PIR]		= 0x0320,

	[PSR]		= 0x0328,

	[RDMLR]		= 0x0340,

	[IPGR]		= 0x0350,

	[APR]		= 0x0354,

	[MPR]		= 0x0358,

	[RFCF]		= 0x0360,

	[TPAUSER]	= 0x0364,

	[TPAUSECR]	= 0x0368,

	[MAHR]		= 0x03c0,

	[MALR]		= 0x03c8,

	[TROCR]		= 0x03d0,

	[CDCR]		= 0x03d4,

	[LCCR]		= 0x03d8,

	[CNDCR]		= 0x03dc,

	[CEFCR]		= 0x03e4,

	[FRECR]		= 0x03e8,

	[TSFRCR]	= 0x03ec,

	[TLFRCR]	= 0x03f0,

	[RFCR]		= 0x03f4,

	[MAFCR]		= 0x03f8,



	[EDMR]		= 0x0200,

	[EDTRR]		= 0x0208,

	[EDRRR]		= 0x0210,

	[TDLAR]		= 0x0218,

	[RDLAR]		= 0x0220,

	[EESR]		= 0x0228,

	[EESIPR]	= 0x0230,

	[TRSCER]	= 0x0238,

	[RMFCR]		= 0x0240,

	[TFTR]		= 0x0248,

	[FDR]		= 0x0250,

	[RMCR]		= 0x0258,

	[TFUCR]		= 0x0264,

	[RFOCR]		= 0x0268,

	[FCFTR]		= 0x0270,

	[TRIMD]		= 0x027c,

};



static const u16 sh_eth_offset_fast_sh4[SH_ETH_MAX_REGISTER_OFFSET] = {

	[ECMR]		= 0x0100,

	[RFLR]		= 0x0108,
@@ -296,7 +342,7 @@ static void sh_eth_select_mii(struct net_device *ndev) 
#endif



/* There is CPU dependent code */

#if defined(CONFIG_CPU_SUBTYPE_SH7724) || defined(CONFIG_ARCH_R8A7779)

#if defined(CONFIG_ARCH_R8A7779)

#define SH_ETH_RESET_DEFAULT	1

static void sh_eth_set_duplex(struct net_device *ndev)

{
@@ -311,18 +357,60 @@ static void sh_eth_set_duplex(struct net_device *ndev) 
static void sh_eth_set_rate(struct net_device *ndev)

{

	struct sh_eth_private *mdp = netdev_priv(ndev);

	unsigned int bits = ECMR_RTM;



#if defined(CONFIG_ARCH_R8A7779)

	bits |= ECMR_ELB;

#endif

	switch (mdp->speed) {

	case 10: /* 10BASE */

		sh_eth_write(ndev, sh_eth_read(ndev, ECMR) & ~ECMR_ELB, ECMR);

		break;

	case 100:/* 100BASE */

		sh_eth_write(ndev, sh_eth_read(ndev, ECMR) | ECMR_ELB, ECMR);

		break;

	default:

		break;

	}

}



/* R8A7779 */

static struct sh_eth_cpu_data sh_eth_my_cpu_data = {

	.set_duplex	= sh_eth_set_duplex,

	.set_rate	= sh_eth_set_rate,



	.ecsr_value	= ECSR_PSRTO | ECSR_LCHNG | ECSR_ICD,

	.ecsipr_value	= ECSIPR_PSRTOIP | ECSIPR_LCHNGIP | ECSIPR_ICDIP,

	.eesipr_value	= 0x01ff009f,



	.tx_check	= EESR_FTC | EESR_CND | EESR_DLC | EESR_CD | EESR_RTO,

	.eesr_err_check	= EESR_TWB | EESR_TABT | EESR_RABT | EESR_RDE |

			  EESR_RFRMER | EESR_TFE | EESR_TDE | EESR_ECI,

	.tx_error_check	= EESR_TWB | EESR_TABT | EESR_TDE | EESR_TFE,



	.apr		= 1,

	.mpr		= 1,

	.tpauser	= 1,

	.hw_swap	= 1,

};

#elif defined(CONFIG_CPU_SUBTYPE_SH7724)

#define SH_ETH_RESET_DEFAULT	1

static void sh_eth_set_duplex(struct net_device *ndev)

{

	struct sh_eth_private *mdp = netdev_priv(ndev);



	if (mdp->duplex) /* Full */

		sh_eth_write(ndev, sh_eth_read(ndev, ECMR) | ECMR_DM, ECMR);

	else		/* Half */

		sh_eth_write(ndev, sh_eth_read(ndev, ECMR) & ~ECMR_DM, ECMR);

}



static void sh_eth_set_rate(struct net_device *ndev)

{

	struct sh_eth_private *mdp = netdev_priv(ndev);



	switch (mdp->speed) {

	case 10: /* 10BASE */

		sh_eth_write(ndev, sh_eth_read(ndev, ECMR) & ~bits, ECMR);

		sh_eth_write(ndev, sh_eth_read(ndev, ECMR) & ~ECMR_RTM, ECMR);

		break;

	case 100:/* 100BASE */

		sh_eth_write(ndev, sh_eth_read(ndev, ECMR) | bits, ECMR);

		sh_eth_write(ndev, sh_eth_read(ndev, ECMR) | ECMR_RTM, ECMR);

		break;

	default:

		break;
@@ -2521,6 +2609,9 @@ static const u16 *sh_eth_get_register_offset(int register_type) 
	case SH_ETH_REG_GIGABIT:

		reg_offset = sh_eth_offset_gigabit;

		break;

	case SH_ETH_REG_FAST_RCAR:

		reg_offset = sh_eth_offset_fast_rcar;

		break;

	case SH_ETH_REG_FAST_SH4:

		reg_offset = sh_eth_offset_fast_sh4;

		break;

include/linux/sh_eth.h

+1 −0
Original line number Diff line number Diff line
@@ -6,6 +6,7 @@ 
enum {EDMAC_LITTLE_ENDIAN, EDMAC_BIG_ENDIAN};

enum {

	SH_ETH_REG_GIGABIT,

	SH_ETH_REG_FAST_RCAR,

	SH_ETH_REG_FAST_SH4,

	SH_ETH_REG_FAST_SH3_SH2

};

CRA Git | Maintained and supported by SUSTech CRA and CCSE