Unverified Commit a16be2a6 authored by Peter Ujfalusi's avatar Peter Ujfalusi Committed by Mark Brown
Browse files

ASoC: tlv320aic31xx: Do not force power on the DAC/ADC in clock master mode 



With P0 R29, Bit2 set the I2S clocks will be running when the DAC/ADC is
powered down, but still the codec need to be powered up by needing at least
one complete DAPM path for the stream.

If the AIF is not needed (analog loopback for example) the I2S clocks will
not run as they are not needed.

Signed-off-by: default avatarPeter Ujfalusi <peter.ujfalusi@ti.com>
Suggested-by: default avatarStefan Müller-Klieser <s.mueller-klieser@phytec.de>
Signed-off-by: default avatarMark Brown <broonie@kernel.org>
parent 7d41bc28

sound/soc/codecs/tlv320aic31xx.c

+22 −10
Original line number Diff line number Diff line
@@ -501,6 +501,10 @@ static const struct snd_soc_dapm_widget common31xx_dapm_widgets[] = { 
	SND_SOC_DAPM_SUPPLY("MICBIAS", SND_SOC_NOPM, 0, 0, mic_bias_event,

			    SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),



	/* Keep BCLK/WCLK enabled even if DAC/ADC is powered down */

	SND_SOC_DAPM_SUPPLY("Activate I2S clocks", AIC31XX_IFACE2, 2, 0,

			    NULL, 0),



	/* Outputs */

	SND_SOC_DAPM_OUTPUT("HPL"),

	SND_SOC_DAPM_OUTPUT("HPR"),
@@ -553,6 +557,8 @@ static const struct snd_soc_dapm_widget aic31xx_dapm_widgets[] = { 
	SND_SOC_DAPM_MIXER("Output Right", SND_SOC_NOPM, 0, 0,

			   aic31xx_right_output_switches,

			   ARRAY_SIZE(aic31xx_right_output_switches)),



	SND_SOC_DAPM_AIF_OUT("AIF OUT", "Capture", 0, SND_SOC_NOPM, 0, 0),

};



static const struct snd_soc_dapm_widget aic311x_dapm_widgets[] = {
@@ -640,6 +646,8 @@ aic31xx_audio_map[] = { 


	{"ADC", NULL, "MIC_GAIN_CTL"},



	{"AIF OUT", NULL, "ADC"},



	/* Left Output */

	{"Output Left", "From Left DAC", "DAC Left"},

	{"Output Left", "From MIC1LP", "MIC1LP"},
@@ -673,25 +681,29 @@ aic310x_audio_map[] = { 


/*

 * Always connected DAPM routes for codec clock master modes.

 * If the codec is the master on the I2S bus, we need to power on components

 * to have valid DAC_CLK and also the DACs and ADC for playback/capture.

 * If the codec is the master on the I2S bus, we need to power up components

 * to have valid DAC_CLK.

 *

 * In order to have the I2S clocks on the bus either the DACs/ADC need to be

 * enabled, or the P0/R29/D2 (Keep bclk/wclk in power down) need to be set.

 *

 * Otherwise the codec will not generate clocks on the bus.

 */

static const struct snd_soc_dapm_route

common31xx_cm_audio_map[] = {

	{"DAC Left Input", "Off", "AIF IN"},

	{"DAC Right Input", "Off", "AIF IN"},

	{"HPL", NULL, "AIF IN"},

	{"HPR", NULL, "AIF IN"},



	{"HPL", NULL, "DAC Left"},

	{"HPR", NULL, "DAC Right"},

	{"AIF IN", NULL, "Activate I2S clocks"},

};



static const struct snd_soc_dapm_route

aic31xx_cm_audio_map[] = {

	{"MIC1LP P-Terminal", "Off", "MIC1LP"},

	{"MIC1RP P-Terminal", "Off", "MIC1RP"},

	{"MIC1LM P-Terminal", "Off", "MIC1LM"},

	{"MIC1LM M-Terminal", "Off", "MIC1LM"},

	{"AIF OUT", NULL, "MIC1LP"},

	{"AIF OUT", NULL, "MIC1RP"},

	{"AIF OUT", NULL, "MIC1LM"},



	{"AIF OUT", NULL, "Activate I2S clocks"},

};



static int aic31xx_add_controls(struct snd_soc_component *component)

sound/soc/codecs/tlv320aic31xx.h

+1 −0
Original line number Diff line number Diff line
@@ -160,6 +160,7 @@ struct aic31xx_pdata { 
#define AIC31XX_DACMOD2BCLK		0x01

#define AIC31XX_ADC2BCLK		0x02

#define AIC31XX_ADCMOD2BCLK		0x03

#define AIC31XX_KEEP_I2SCLK		BIT(2)



/* AIC31XX_ADCFLAG */

#define AIC31XX_ADCPWRSTATUS_MASK	BIT(6)

CRA Git | Maintained and supported by SUSTech CRA and CCSE