ASoC: WM8903: Fix platform data gpio_cfg confusion (a0f203d3) · Commits · 戴 / test

wm8903_platform_data.gpio_cfg[] was intended to be interpreted as follows: 0: Don't touch this GPIO's configuration register 1..7fff: Write that value to the GPIO's configuration register 8000: Write zero to the GPIO's configuration register other: Undefined (invalid) The rationale is that platform data is usually global data, and a value of zero means that the field wasn't explicitly set to anything (e.g. because the field was new to the pdata type, and existing users weren't update to initialize it) and hence the value zero should be ignored. 0x8000 is an explicit way to get 0 in the register. The code worked this way until commit "ASoC: wm8903: Expose GPIOs through gpiolib", where the behaviour was changed due to my lack of awareness of the above rationale. This patch reverts to the intended behaviour, and updates all in-tree users to use the correct scheme. This also makes WM8903 consistent with other devices that use a similar scheme. WM8903_GPIO_NO_CONFIG is also renamed to WM8903_GPIO_CONFIG_ZERO so that its name accurately reflects its purpose. Signed-off-by:

Stephen Warren <swarren@nvidia.com> Cc: Olof Johansson <olof@lixom.net> Cc: Colin Cross <ccross@android.com> Signed-off-by:

Mark Brown <broonie@opensource.wolfsonmicro.com>

arch/arm/mach-tegra/board-harmony.c

+4 −4

Original line number	Diff line number	Diff line
		@@ -89,11 +89,11 @@ static struct wm8903_platform_data harmony_wm8903_pdata = {
		.micdet_delay = 100,
		.gpio_base = HARMONY_GPIO_WM8903(0),
		.gpio_cfg = {
		WM8903_GPIO_NO_CONFIG,
		WM8903_GPIO_NO_CONFIG,
		0,
		WM8903_GPIO_NO_CONFIG,
		WM8903_GPIO_NO_CONFIG,
		0,
		WM8903_GPIO_CONFIG_ZERO,
		0,
		0,
		},
		};

arch/arm/mach-tegra/board-seaboard.c

+4 −4

Original line number	Diff line number	Diff line
		@@ -171,11 +171,11 @@ static struct wm8903_platform_data wm8903_pdata = {
		.micdet_delay = 100,
		.gpio_base = SEABOARD_GPIO_WM8903(0),
		.gpio_cfg = {
		WM8903_GPIO_NO_CONFIG,
		WM8903_GPIO_NO_CONFIG,
		0,
		WM8903_GPIO_NO_CONFIG,
		WM8903_GPIO_NO_CONFIG,
		0,
		WM8903_GPIO_CONFIG_ZERO,
		0,
		0,
		},
		};

include/sound/wm8903.h

+5 −2

Original line number	Diff line number	Diff line
		@@ -11,8 +11,11 @@
		#ifndef __LINUX_SND_WM8903_H
		#define __LINUX_SND_WM8903_H

		/* Used to enable configuration of a GPIO to all zeros */
		#define WM8903_GPIO_NO_CONFIG 0x8000
		/*
		* Used to enable configuration of a GPIO to all zeros; a gpio_cfg value of
		* zero in platform data means "don't touch this pin".
		*/
		#define WM8903_GPIO_CONFIG_ZERO 0x8000

		/*
		* R6 (0x06) - Mic Bias Control 0

sound/soc/codecs/wm8903.c

+2 −1

Original line number	Diff line number	Diff line
		@@ -1893,7 +1893,8 @@ static int wm8903_probe(struct snd_soc_codec *codec)
		bool mic_gpio = false;

		for (i = 0; i < ARRAY_SIZE(pdata->gpio_cfg); i++) {
		if (pdata->gpio_cfg[i] > 0x7fff)
		if ((!pdata->gpio_cfg[i]) \|\|
		(pdata->gpio_cfg[i] > WM8903_GPIO_CONFIG_ZERO))
		continue;

		snd_soc_write(codec, WM8903_GPIO_CONTROL_1 + i,

Admin message