staging: comedi: dt3000: tidy up multi-line comments

/*

    comedi/drivers/dt3000.c

    Data Translation DT3000 series driver

    COMEDI - Linux Control and Measurement Device Interface

    Copyright (C) 1999 David A. Schleef <ds@schleef.org>

    This program is free software; you can redistribute it and/or modify

    it under the terms of the GNU General Public License as published by

    the Free Software Foundation; either version 2 of the License, or

    (at your option) any later version.

    This program is distributed in the hope that it will be useful,

    but WITHOUT ANY WARRANTY; without even the implied warranty of

    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

    GNU General Public License for more details.

 * dt3000.c

 * Data Translation DT3000 series driver

 *

 * COMEDI - Linux Control and Measurement Device Interface

 * Copyright (C) 1999 David A. Schleef <ds@schleef.org>

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License as published by

 * the Free Software Foundation; either version 2 of the License, or

 * (at your option) any later version.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 */

/*

Driver: dt3000

Description: Data Translation DT3000 series

Author: ds

Devices: [Data Translation] DT3001 (dt3000), DT3001-PGL, DT3002, DT3003,

  DT3003-PGL, DT3004, DT3005, DT3004-200

Updated: Mon, 14 Apr 2008 15:41:24 +0100

Status: works

Configuration Options: not applicable, uses PCI auto config

There is code to support AI commands, but it may not work.

AO commands are not supported.

/*

 * Driver: dt3000

 * Description: Data Translation DT3000 series

 * Devices: [Data Translation] DT3001 (dt3000), DT3001-PGL, DT3002, DT3003,

 *   DT3003-PGL, DT3004, DT3005, DT3004-200

 * Author: ds

 * Updated: Mon, 14 Apr 2008 15:41:24 +0100

 * Status: works

 *

 * Configuration Options: not applicable, uses PCI auto config

 *

 * There is code to support AI commands, but it may not work.

 *

 * AO commands are not supported.

 */

/*

   The DT3000 series is Data Translation's attempt to make a PCI

   data acquisition board.  The design of this series is very nice,

   since each board has an on-board DSP (Texas Instruments TMS320C52).

   However, a few details are a little annoying.  The boards lack

   bus-mastering DMA, which eliminates them from serious work.

   They also are not capable of autocalibration, which is a common

   feature in modern hardware.  The default firmware is pretty bad,

   making it nearly impossible to write an RT compatible driver.

   It would make an interesting project to write a decent firmware

   for these boards.

   Data Translation originally wanted an NDA for the documentation

   for the 3k series.  However, if you ask nicely, they might send

   you the docs without one, also.

 * The DT3000 series is Data Translation's attempt to make a PCI

 * data acquisition board.  The design of this series is very nice,

 * since each board has an on-board DSP (Texas Instruments TMS320C52).

 * However, a few details are a little annoying.  The boards lack

 * bus-mastering DMA, which eliminates them from serious work.

 * They also are not capable of autocalibration, which is a common

 * feature in modern hardware.  The default firmware is pretty bad,

 * making it nearly impossible to write an RT compatible driver.

 * It would make an interesting project to write a decent firmware

 * for these boards.

 *

 * Data Translation originally wanted an NDA for the documentation

 * for the 3k series.  However, if you ask nicely, they might send

 * you the docs without one, also.

 */

#include <linux/module.h>