Commit 9c559b15 authored by Pascal Paillet's avatar Pascal Paillet Committed by Alexandre Torgue
Browse files

ARM: dts: stm32: add stpmic1 support on stm32mp157c ed1 board 



This patch adds stpmic1 support on stm32mp157c ed1 board.
The STPMIC1 is a PMIC from STMicroelectronics. The STPMIC1 integrates 10
regulators, 3 power switches, a watchdog and an input for a power on key.
The DMAs are disabled because the PMIC generates a very few traffic and
DMA channels may lack for other usage.

Signed-off-by: default avatarPascal Paillet <p.paillet@st.com>
Signed-off-by: default avatarAlexandre Torgue <alexandre.torgue@st.com>
parent 94d3d6f4

arch/arm/boot/dts/stm32mp157c-ed1.dts

+140 −16
Original line number Diff line number Diff line
@@ -8,6 +8,7 @@ 
#include "stm32mp157c.dtsi"

#include "stm32mp157-pinctrl.dtsi"

#include <dt-bindings/gpio/gpio.h>

#include <dt-bindings/mfd/st,stpmic1.h>



/ {

	model = "STMicroelectronics STM32MP157C eval daughter";
@@ -42,22 +43,6 @@ 
		regulator-always-on;

	};



	vdd_sd: regulator-vdd_sd {

		compatible = "regulator-fixed";

		regulator-name = "vdd_sd";

		regulator-min-microvolt = <3300000>;

		regulator-max-microvolt = <3300000>;

		regulator-always-on;

	};



	vdd_usb: vdd-usb {

		compatible = "regulator-fixed";

		regulator-name = "vdd_usb";

		regulator-min-microvolt = <3300000>;

		regulator-max-microvolt = <3300000>;

		regulator-always-on;

	};



	sd_switch: regulator-sd_switch {

		compatible = "regulator-gpio";

		regulator-name = "sd_switch";
@@ -82,6 +67,145 @@ 
	i2c-scl-rising-time-ns = <185>;

	i2c-scl-falling-time-ns = <20>;

	status = "okay";

	/* spare dmas for other usage */

	/delete-property/dmas;

	/delete-property/dma-names;



	pmic: stpmic@33 {

		compatible = "st,stpmic1";

		reg = <0x33>;

		interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>;

		interrupt-controller;

		#interrupt-cells = <2>;

		status = "okay";



		regulators {

			compatible = "st,stpmic1-regulators";

			ldo1-supply = <&v3v3>;

			ldo2-supply = <&v3v3>;

			ldo3-supply = <&vdd_ddr>;

			ldo5-supply = <&v3v3>;

			ldo6-supply = <&v3v3>;

			pwr_sw1-supply = <&bst_out>;

			pwr_sw2-supply = <&bst_out>;



			vddcore: buck1 {

				regulator-name = "vddcore";

				regulator-min-microvolt = <800000>;

				regulator-max-microvolt = <1350000>;

				regulator-always-on;

				regulator-initial-mode = <0>;

				regulator-over-current-protection;

			};



			vdd_ddr: buck2 {

				regulator-name = "vdd_ddr";

				regulator-min-microvolt = <1350000>;

				regulator-max-microvolt = <1350000>;

				regulator-always-on;

				regulator-initial-mode = <0>;

				regulator-over-current-protection;

			};



			vdd: buck3 {

				regulator-name = "vdd";

				regulator-min-microvolt = <3300000>;

				regulator-max-microvolt = <3300000>;

				regulator-always-on;

				st,mask-reset;

				regulator-initial-mode = <0>;

				regulator-over-current-protection;

			};



			v3v3: buck4 {

				regulator-name = "v3v3";

				regulator-min-microvolt = <3300000>;

				regulator-max-microvolt = <3300000>;

				regulator-always-on;

				regulator-over-current-protection;

				regulator-initial-mode = <0>;

			};



			vdda: ldo1 {

				regulator-name = "vdda";

				regulator-min-microvolt = <2900000>;

				regulator-max-microvolt = <2900000>;

				interrupts = <IT_CURLIM_LDO1 0>;

			};



			v2v8: ldo2 {

				regulator-name = "v2v8";

				regulator-min-microvolt = <2800000>;

				regulator-max-microvolt = <2800000>;

				interrupts = <IT_CURLIM_LDO2 0>;

			};



			vtt_ddr: ldo3 {

				regulator-name = "vtt_ddr";

				regulator-min-microvolt = <500000>;

				regulator-max-microvolt = <750000>;

				regulator-always-on;

				regulator-over-current-protection;

			};



			vdd_usb: ldo4 {

				regulator-name = "vdd_usb";

				regulator-min-microvolt = <3300000>;

				regulator-max-microvolt = <3300000>;

				interrupts = <IT_CURLIM_LDO4 0>;

			};



			vdd_sd: ldo5 {

				regulator-name = "vdd_sd";

				regulator-min-microvolt = <2900000>;

				regulator-max-microvolt = <2900000>;

				interrupts = <IT_CURLIM_LDO5 0>;

				regulator-boot-on;

			};



			v1v8: ldo6 {

				regulator-name = "v1v8";

				regulator-min-microvolt = <1800000>;

				regulator-max-microvolt = <1800000>;

				interrupts = <IT_CURLIM_LDO6 0>;

			};



			vref_ddr: vref_ddr {

				regulator-name = "vref_ddr";

				regulator-always-on;

				regulator-over-current-protection;

			};



			bst_out: boost {

				regulator-name = "bst_out";

				interrupts = <IT_OCP_BOOST 0>;

			};



			vbus_otg: pwr_sw1 {

				regulator-name = "vbus_otg";

				interrupts = <IT_OCP_OTG 0>;

			 };



			 vbus_sw: pwr_sw2 {

				regulator-name = "vbus_sw";

				interrupts = <IT_OCP_SWOUT 0>;

				regulator-active-discharge;

			 };

		};



		onkey {

			compatible = "st,stpmic1-onkey";

			interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 0>;

			interrupt-names = "onkey-falling", "onkey-rising";

			power-off-time-sec = <10>;

			status = "okay";

		};



		watchdog {

			compatible = "st,stpmic1-wdt";

			status = "disabled";

		};

	};

};



&ipcc {

CRA Git | Maintained and supported by SUSTech CRA and CCSE