ncr5380: Update usage documentation (9c41ab27) · Commits · 戴 / test

Documentation/scsi/g_NCR5380.txt

+7 −10

Original line number	Diff line number	Diff line
		@@ -23,11 +23,10 @@ supported by the driver.

		If the default configuration does not work for you, you can use the kernel
		command lines (eg using the lilo append command):
		ncr5380=port,irq,dma
		ncr53c400=port,irq
		or
		ncr5380=base,irq,dma
		ncr53c400=base,irq
		ncr5380=addr,irq
		ncr53c400=addr,irq
		ncr53c400a=addr,irq
		dtc3181e=addr,irq

		The driver does not probe for any addresses or ports other than those in
		the OVERRIDE or given to the kernel as above.
		@@ -36,19 +35,17 @@ This driver provides some information on what it has detected in
		/proc/scsi/g_NCR5380/x where x is the scsi card number as detected at boot
		time. More info to come in the future.

		When NCR53c400 support is compiled in, BIOS parameters will be returned by
		the driver (the raw 5380 driver does not and I don't plan to fiddle with
		it!).

		This driver works as a module.
		When included as a module, parameters can be passed on the insmod/modprobe
		command line:
		ncr_irq=xx the interrupt
		ncr_addr=xx the port or base address (for port or memory
		mapped, resp.)
		ncr_dma=xx the DMA
		ncr_5380=1 to set up for a NCR5380 board
		ncr_53c400=1 to set up for a NCR53C400 board
		ncr_53c400a=1 to set up for a NCR53C400A board
		dtc_3181e=1 to set up for a Domex Technology Corp 3181E board
		hp_c2502=1 to set up for a Hewlett Packard C2502 board
		e.g.
		modprobe g_NCR5380 ncr_irq=5 ncr_addr=0x350 ncr_5380=1
		for a port mapped NCR5380 board or

Documentation/scsi/scsi-parameters.txt

+8 −3

Original line number	Diff line number	Diff line
		@@ -27,13 +27,15 @@ parameters may be changed at runtime by the command
		aic79xx= [HW,SCSI]
		See Documentation/scsi/aic79xx.txt.

		atascsi= [HW,SCSI] Atari SCSI
		atascsi= [HW,SCSI]
		See drivers/scsi/atari_scsi.c.

		BusLogic= [HW,SCSI]
		See drivers/scsi/BusLogic.c, comment before function
		BusLogic_ParseDriverOptions().

		dtc3181e= [HW,SCSI]
		See Documentation/scsi/g_NCR5380.txt.

		eata= [HW,SCSI]

		@@ -51,8 +53,8 @@ parameters may be changed at runtime by the command
		ips= [HW,SCSI] Adaptec / IBM ServeRAID controller
		See header of drivers/scsi/ips.c.

		mac5380= [HW,SCSI] Format:
		<can_queue>,<cmd_per_lun>,<sg_tablesize>,<hostid>,<use_tags>
		mac5380= [HW,SCSI]
		See drivers/scsi/mac_scsi.c.

		max_luns= [SCSI] Maximum number of LUNs to probe.
		Should be between 1 and 2^32-1.
		@@ -65,10 +67,13 @@ parameters may be changed at runtime by the command
		See header of drivers/scsi/NCR_D700.c.

		ncr5380= [HW,SCSI]
		See Documentation/scsi/g_NCR5380.txt.

		ncr53c400= [HW,SCSI]
		See Documentation/scsi/g_NCR5380.txt.

		ncr53c400a= [HW,SCSI]
		See Documentation/scsi/g_NCR5380.txt.

		ncr53c406a= [HW,SCSI]

drivers/scsi/g_NCR5380.c

+1 −35

Original line number	Diff line number	Diff line
		@@ -18,42 +18,8 @@
		*
		* Added ISAPNP support for DTC436 adapters,
		* Thomas Sailer, sailer@ife.ee.ethz.ch
		*/

		/*
		* TODO : flesh out DMA support, find some one actually using this (I have
		* a memory mapped Trantor board that works fine)
		*/

		/*
		* The card is detected and initialized in one of several ways :
		* 1. With command line overrides - NCR5380=port,irq may be
		* used on the LILO command line to override the defaults.
		*
		* 2. With the GENERIC_NCR5380_OVERRIDE compile time define. This is
		* specified as an array of address, irq, dma, board tuples. Ie, for
		* one board at 0x350, IRQ5, no dma, I could say
		* -DGENERIC_NCR5380_OVERRIDE={{0xcc000, 5, DMA_NONE, BOARD_NCR5380}}
		*
		* -1 should be specified for no or DMA interrupt, -2 to autoprobe for an
		* IRQ line if overridden on the command line.
		*
		* 3. When included as a module, with arguments passed on the command line:
		* ncr_irq=xx the interrupt
		* ncr_addr=xx the port or base address (for port or memory
		* mapped, resp.)
		* ncr_dma=xx the DMA
		* ncr_5380=1 to set up for a NCR5380 board
		* ncr_53c400=1 to set up for a NCR53C400 board
		* e.g.
		* modprobe g_NCR5380 ncr_irq=5 ncr_addr=0x350 ncr_5380=1
		* for a port mapped NCR5380 board or
		* modprobe g_NCR5380 ncr_irq=255 ncr_addr=0xc8000 ncr_53c400=1
		* for a memory mapped NCR53C400 board with interrupts disabled.
		*
		* 255 should be specified for no or DMA interrupt, 254 to autoprobe for an
		* IRQ line if overridden on the command line.
		*
		* See Documentation/scsi/g_NCR5380.txt for more info.
		*/

		#include <asm/io.h>

Admin message