Staging: rtl8187se: r8185b_init.c: Fixed spacing (9af7e27d) · Commits · 戴 / test

drivers/staging/rtl8187se/r8185b_init.c

+351 −370

Original line number	Diff line number	Diff line
		@@ -98,7 +98,6 @@ static u8 OFDM_CONFIG[] = {
		/* OFDM reg0x06[7:0]=0xFF: Enable power saving mode in RX */
		/* OFDM reg0x3C[4]=1'b1: Enable RX power saving mode */
		/* ofdm 0x3a = 0x7b ,(original : 0xfb) For ECS shielding room TP test */

		/* 0x00 */
		0x10, 0x0F, 0x0A, 0x0C, 0x14, 0xFA, 0xFF, 0x50,
		0x00, 0x50, 0x00, 0x00, 0x00, 0x5C, 0x00, 0x00,
		@@ -551,13 +550,9 @@ ZEBRA_Config_85BASIC_HardCode(
		/* Page0 : reg0-reg15 */

		RF_WriteReg(dev, 0x00, 0x009f); mdelay(1);/* 1 */

		RF_WriteReg(dev, 0x01, 0x06e0); mdelay(1);

		RF_WriteReg(dev, 0x02, 0x004d); mdelay(1);/* 2 */

		RF_WriteReg(dev, 0x03, 0x07f1); mdelay(1);/* 3 */

		RF_WriteReg(dev, 0x04, 0x0975); mdelay(1);
		RF_WriteReg(dev, 0x05, 0x0c72); mdelay(1);
		RF_WriteReg(dev, 0x06, 0x0ae6); mdelay(1);
		@@ -571,17 +566,12 @@ ZEBRA_Config_85BASIC_HardCode(
		RF_WriteReg(dev, 0x0e, 0x0020); mdelay(1);
		RF_WriteReg(dev, 0x0f, 0x0990); mdelay(1);


		/* Page1 : reg16-reg30 */
		RF_WriteReg(dev, 0x00, 0x013f); mdelay(1);

		RF_WriteReg(dev, 0x03, 0x0806); mdelay(1);

		RF_WriteReg(dev, 0x04, 0x03a7); mdelay(1);
		RF_WriteReg(dev, 0x05, 0x059b); mdelay(1);
		RF_WriteReg(dev, 0x06, 0x0081); mdelay(1);


		RF_WriteReg(dev, 0x07, 0x01A0); mdelay(1);
		/* Don't write RF23/RF24 to make a difference between 87S C cut and D cut. asked by SD3 stevenl. */
		RF_WriteReg(dev, 0x0a, 0x0001); mdelay(1);
		@@ -598,11 +588,10 @@ ZEBRA_Config_85BASIC_HardCode(
		}

		RF_WriteReg(dev, 0x0f, 0x0acc); mdelay(1);

		RF_WriteReg(dev, 0x00, 0x01d7); mdelay(1); /* 6 */

		RF_WriteReg(dev, 0x03, 0x0e00); mdelay(1);
		RF_WriteReg(dev, 0x04, 0x0e50); mdelay(1);

		for (i = 0; i <= 36; i++) {
		RF_WriteReg(dev, 0x01, i); mdelay(1);
		RF_WriteReg(dev, 0x02, ZEBRA_RF_RX_GAIN_TABLE[i]); mdelay(1);
		@@ -610,7 +599,6 @@ ZEBRA_Config_85BASIC_HardCode(

		RF_WriteReg(dev, 0x05, 0x0203); mdelay(1); /* 203, 343 */
		RF_WriteReg(dev, 0x06, 0x0200); mdelay(1); /* 400 */

		RF_WriteReg(dev, 0x00, 0x0137); mdelay(1); /* switch to reg16-reg30, and HSSI disable 137 */
		mdelay(10); /* Deay 10 ms. / / 0xfd */

		@@ -669,7 +657,6 @@ ZEBRA_Config_85BASIC_HardCode(
		RF_WriteReg(dev, 0x00, 0x0197); mdelay(1); /* Rx mode/ /+edward */
		RF_WriteReg(dev, 0x05, 0x05ab); mdelay(1); /* Rx mode/ /+edward */
		RF_WriteReg(dev, 0x00, 0x009f); mdelay(1); /* Rx mode/ /+edward */

		RF_WriteReg(dev, 0x01, 0x0000); mdelay(1); /* Rx mode/ /+edward */
		RF_WriteReg(dev, 0x02, 0x0000); mdelay(1); /* Rx mode/ /+edward */
		/* power save parameters. */
		@@ -952,7 +939,6 @@ MacConfig_85BASIC_HardCode(
		============================================================================
		*/
		int nLinesRead = 0;

		u32 u4bRegOffset, u4bRegValue, u4bPageIndex = 0;
		int i;

		@@ -964,7 +950,6 @@ MacConfig_85BASIC_HardCode(

		if (u4bRegOffset == 0x5e)
		u4bPageIndex = u4bRegValue;

		else
		u4bRegOffset \|= (u4bPageIndex << 8);

		@@ -1300,14 +1285,11 @@ MlmeDisassociateRequest(
		/* ShuChen TODO: What to do when disassociate. */
		DrvIFIndicateDisassociation(dev, unspec_reason);



		for (i = 0; i < 6; i++)
		priv->ieee80211->current_network.bssid[i] = 0x22;

		ieee80211_disassociate(priv->ieee80211);
		}

		}

		void
		@@ -1469,7 +1451,6 @@ MgntActSet_RF_State(
		because we do NOT need to set ssid to dummy ones.
		*/
		MgntDisconnect(dev, disas_lv_ss);

		/* Clear content of bssDesc[] and bssDesc4Query[] to avoid reporting old bss to UI. */
		}

Admin message