USB: add asynchronous autosuspend/autoresume support (9ac39f28) · Commits · 戴 / test

Documentation/usb/power-management.txt

+17 −5

Original line number	Diff line number	Diff line
		@@ -313,11 +313,13 @@ three of the methods listed above. In addition, a driver indicates
		that it supports autosuspend by setting the .supports_autosuspend flag
		in its usb_driver structure. It is then responsible for informing the
		USB core whenever one of its interfaces becomes busy or idle. The
		driver does so by calling these three functions:
		driver does so by calling these five functions:

		int usb_autopm_get_interface(struct usb_interface *intf);
		void usb_autopm_put_interface(struct usb_interface *intf);
		int usb_autopm_set_interface(struct usb_interface *intf);
		int usb_autopm_get_interface_async(struct usb_interface *intf);
		void usb_autopm_put_interface_async(struct usb_interface *intf);

		The functions work by maintaining a counter in the usb_interface
		structure. When intf->pm_usage_count is > 0 then the interface is
		@@ -330,10 +332,12 @@ associated with the device itself rather than any of its interfaces.
		This field is used only by the USB core.)

		The driver owns intf->pm_usage_count; it can modify the value however
		and whenever it likes. A nice aspect of the usb_autopm_* routines is
		that the changes they make are protected by the usb_device structure's
		PM mutex (udev->pm_mutex); however drivers may change pm_usage_count
		without holding the mutex.
		and whenever it likes. A nice aspect of the non-async usb_autopm_*
		routines is that the changes they make are protected by the usb_device
		structure's PM mutex (udev->pm_mutex); however drivers may change
		pm_usage_count without holding the mutex. Drivers using the async
		routines are responsible for their own synchronization and mutual
		exclusion.

		usb_autopm_get_interface() increments pm_usage_count and
		attempts an autoresume if the new value is > 0 and the
		@@ -348,6 +352,14 @@ without holding the mutex.
		is suspended, and it attempts an autosuspend if the value is
		<= 0 and the device isn't suspended.

		usb_autopm_get_interface_async() and
		usb_autopm_put_interface_async() do almost the same things as
		their non-async counterparts. The differences are: they do
		not acquire the PM mutex, and they use a workqueue to do their
		jobs. As a result they can be called in an atomic context,
		such as an URB's completion handler, but when they return the
		device will not generally not yet be in the desired state.

		There also are a couple of utility routines drivers can use:

		usb_autopm_enable() sets pm_usage_cnt to 0 and then calls

drivers/usb/core/driver.c

+86 −0

Original line number	Diff line number	Diff line
		@@ -1341,6 +1341,19 @@ void usb_autosuspend_work(struct work_struct *work)
		usb_autopm_do_device(udev, 0);
		}

		/* usb_autoresume_work - callback routine to autoresume a USB device */
		void usb_autoresume_work(struct work_struct *work)
		{
		struct usb_device *udev =
		container_of(work, struct usb_device, autoresume);

		/* Wake it up, let the drivers do their thing, and then put it
		* back to sleep.
		*/
		if (usb_autopm_do_device(udev, 1) == 0)
		usb_autopm_do_device(udev, -1);
		}

		/**
		* usb_autosuspend_device - delayed autosuspend of a USB device and its interfaces
		* @udev: the usb_device to autosuspend
		@@ -1491,6 +1504,45 @@ void usb_autopm_put_interface(struct usb_interface *intf)
		}
		EXPORT_SYMBOL_GPL(usb_autopm_put_interface);

		/**
		* usb_autopm_put_interface_async - decrement a USB interface's PM-usage counter
		* @intf: the usb_interface whose counter should be decremented
		*
		* This routine does essentially the same thing as
		* usb_autopm_put_interface(): it decrements @intf's usage counter and
		* queues a delayed autosuspend request if the counter is <= 0. The
		* difference is that it does not acquire the device's pm_mutex;
		* callers must handle all synchronization issues themselves.
		*
		* Typically a driver would call this routine during an URB's completion
		* handler, if no more URBs were pending.
		*
		* This routine can run in atomic context.
		*/
		void usb_autopm_put_interface_async(struct usb_interface *intf)
		{
		struct usb_device *udev = interface_to_usbdev(intf);
		int status = 0;

		if (intf->condition == USB_INTERFACE_UNBOUND) {
		status = -ENODEV;
		} else {
		udev->last_busy = jiffies;
		--intf->pm_usage_cnt;
		if (udev->autosuspend_disabled \|\| udev->autosuspend_delay < 0)
		status = -EPERM;
		else if (intf->pm_usage_cnt <= 0 &&
		!timer_pending(&udev->autosuspend.timer)) {
		queue_delayed_work(ksuspend_usb_wq, &udev->autosuspend,
		round_jiffies_relative(
		udev->autosuspend_delay));
		}
		}
		dev_vdbg(&intf->dev, "%s: status %d cnt %d\n",
		__func__, status, intf->pm_usage_cnt);
		}
		EXPORT_SYMBOL_GPL(usb_autopm_put_interface_async);

		/**
		* usb_autopm_get_interface - increment a USB interface's PM-usage counter
		* @intf: the usb_interface whose counter should be incremented
		@@ -1536,6 +1588,37 @@ int usb_autopm_get_interface(struct usb_interface *intf)
		}
		EXPORT_SYMBOL_GPL(usb_autopm_get_interface);

		/**
		* usb_autopm_get_interface_async - increment a USB interface's PM-usage counter
		* @intf: the usb_interface whose counter should be incremented
		*
		* This routine does much the same thing as
		* usb_autopm_get_interface(): it increments @intf's usage counter and
		* queues an autoresume request if the result is > 0. The differences
		* are that it does not acquire the device's pm_mutex (callers must
		* handle all synchronization issues themselves), and it does not
		* autoresume the device directly (it only queues a request). After a
		* successful call, the device will generally not yet be resumed.
		*
		* This routine can run in atomic context.
		*/
		int usb_autopm_get_interface_async(struct usb_interface *intf)
		{
		struct usb_device *udev = interface_to_usbdev(intf);
		int status = 0;

		if (intf->condition == USB_INTERFACE_UNBOUND)
		status = -ENODEV;
		else if (udev->autoresume_disabled)
		status = -EPERM;
		else if (++intf->pm_usage_cnt > 0 && udev->state == USB_STATE_SUSPENDED)
		queue_work(ksuspend_usb_wq, &udev->autoresume);
		dev_vdbg(&intf->dev, "%s: status %d cnt %d\n",
		__func__, status, intf->pm_usage_cnt);
		return status;
		}
		EXPORT_SYMBOL_GPL(usb_autopm_get_interface_async);

		/**
		* usb_autopm_set_interface - set a USB interface's autosuspend state
		* @intf: the usb_interface whose state should be set
		@@ -1563,6 +1646,9 @@ EXPORT_SYMBOL_GPL(usb_autopm_set_interface);
		void usb_autosuspend_work(struct work_struct *work)
		{}

		void usb_autoresume_work(struct work_struct *work)
		{}

		#endif /* CONFIG_USB_SUSPEND */

		/**

drivers/usb/core/hub.c

+3 −2

Original line number	Diff line number	Diff line
		@@ -1374,8 +1374,9 @@ static void usb_stop_pm(struct usb_device *udev)
		usb_autosuspend_device(udev->parent);
		usb_pm_unlock(udev);

		/* Stop any autosuspend requests already submitted */
		cancel_rearming_delayed_work(&udev->autosuspend);
		/* Stop any autosuspend or autoresume requests already submitted */
		cancel_delayed_work_sync(&udev->autosuspend);
		cancel_work_sync(&udev->autoresume);
		}

		#else

drivers/usb/core/usb.c

+1 −0

Original line number	Diff line number	Diff line
		@@ -402,6 +402,7 @@ struct usb_device usb_alloc_dev(struct usb_device parent,
		#ifdef CONFIG_PM
		mutex_init(&dev->pm_mutex);
		INIT_DELAYED_WORK(&dev->autosuspend, usb_autosuspend_work);
		INIT_WORK(&dev->autoresume, usb_autoresume_work);
		dev->autosuspend_delay = usb_autosuspend_delay * HZ;
		dev->connect_time = jiffies;
		dev->active_duration = -jiffies;

drivers/usb/core/usb.h

+1 −0

Original line number	Diff line number	Diff line
		@@ -45,6 +45,7 @@ extern int usb_suspend(struct device *dev, pm_message_t msg);
		extern int usb_resume(struct device *dev);

		extern void usb_autosuspend_work(struct work_struct *work);
		extern void usb_autoresume_work(struct work_struct *work);
		extern int usb_port_suspend(struct usb_device *dev);
		extern int usb_port_resume(struct usb_device *dev);
		extern int usb_external_suspend_device(struct usb_device *udev,

Admin message