dt: Fix broken references to renamed docs

			  &lsio_mu1 1 2

			  &lsio_mu1 1 3

			  &lsio_mu1 3 3>;

		See Documentation/devicetree/bindings/mailbox/fsl,mu.txt

		See Documentation/devicetree/bindings/mailbox/fsl,mu.yaml

		for detailed mailbox binding.

Note: Each mu which supports general interrupt should have an alias correctly

  datasheet

- clocks : phandle to the PRE axi clock input, as described

  in Documentation/devicetree/bindings/clock/clock-bindings.txt and

  Documentation/devicetree/bindings/clock/imx6q-clock.txt.

  Documentation/devicetree/bindings/clock/imx6q-clock.yaml.

- clock-names: should be "axi"

- interrupts: should contain the PRE interrupt

- fsl,iram: phandle pointing to the mmio-sram device node, that should be

  datasheet

- clocks : phandles to the PRG ipg and axi clock inputs, as described

  in Documentation/devicetree/bindings/clock/clock-bindings.txt and

  Documentation/devicetree/bindings/clock/imx6q-clock.txt.

  Documentation/devicetree/bindings/clock/imx6q-clock.yaml.

- clock-names: should be "ipg" and "axi"

- fsl,pres: phandles to the PRE units attached to this PRG, with the fixed

  PRE as the first entry and the muxable PREs following.

                "di2_sel" - IPU2 DI0 mux

                "di3_sel" - IPU2 DI1 mux

        The needed clock numbers for each are documented in

        Documentation/devicetree/bindings/clock/imx5-clock.txt, and in

        Documentation/devicetree/bindings/clock/imx6q-clock.txt.

        Documentation/devicetree/bindings/clock/imx5-clock.yaml, and in

        Documentation/devicetree/bindings/clock/imx6q-clock.yaml.

Optional properties:

 - pinctrl-names : should be "default" on i.MX53, not used on i.MX6q

SPI Controller nodes must be child of GENI based Qualcomm Universal

Peripharal. Please refer GENI based QUP wrapper controller node bindings

described in Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt.

described in Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml.

SPI slave nodes must be children of the SPI master node and conform to SPI bus

binding as described in Documentation/devicetree/bindings/spi/spi-bus.txt.

M:	Niklas Söderlund <niklas.soderlund@ragnatech.se>

L:	linux-renesas-soc@vger.kernel.org

S:	Supported

F:	Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.txt

F:	Documentation/devicetree/bindings/thermal/rcar-thermal.txt

F:	Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml

F:	Documentation/devicetree/bindings/thermal/rcar-thermal.yaml

F:	drivers/thermal/rcar_gen3_thermal.c

F:	drivers/thermal/rcar_thermal.c