Commit 98823f37 authored by Geert Uytterhoeven's avatar Geert Uytterhoeven Committed by Sam Ravnborg
Browse files

drm: tiny: st7735r: Prepare for adding support for more displays 



Currently the st7735r driver supports only a single display panel.
Prepare for adding support for other display panels by factoring out the
display-specific parameters in struct st7735r_cfg.

For now, the following parameters can be configured:
  - Display resolution,
  - Horizontal/vertical display offsets,
  - Read-write versus read-only controllers,
  - RGB versus BGR color component ordering.

Rename jd_t18003_t01_pipe_enable() and jd_t18003_t01_pipe_funcs() to
st7735r_pipe_enable() resp. st7735r_pipe_funcs(), as they are not really
specific to the Jianda JD-T18003-T01 display anymore.

Signed-off-by: default avatarGeert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: default avatarSam Ravnborg <sam@ravnborg.org>
Signed-off-by: default avatarSam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200115124548.3951-5-geert+renesas@glider.be
parent f41a8a69

drivers/gpu/drm/tiny/st7735r.c

+53 −14
Original line number Diff line number Diff line
@@ -3,6 +3,7 @@ 
 * DRM driver for Sitronix ST7735R panels

 *

 * Copyright 2017 David Lechner <david@lechnology.com>

 * Copyright (C) 2019 Glider bvba

 */



#include <linux/backlight.h>
@@ -10,6 +11,7 @@ 
#include <linux/dma-buf.h>

#include <linux/gpio/consumer.h>

#include <linux/module.h>

#include <linux/of_device.h>

#include <linux/property.h>

#include <linux/spi/spi.h>

#include <video/mipi_display.h>
@@ -37,12 +39,28 @@ 
#define ST7735R_MY	BIT(7)

#define ST7735R_MX	BIT(6)

#define ST7735R_MV	BIT(5)

#define ST7735R_RGB	BIT(3)



struct st7735r_cfg {

	const struct drm_display_mode mode;

	unsigned int left_offset;

	unsigned int top_offset;

	unsigned int write_only:1;

	unsigned int rgb:1;		/* RGB (vs. BGR) */

};



struct st7735r_priv {

	struct mipi_dbi_dev dbidev;	/* Must be first for .release() */

	const struct st7735r_cfg *cfg;

};



static void jd_t18003_t01_pipe_enable(struct drm_simple_display_pipe *pipe,

static void st7735r_pipe_enable(struct drm_simple_display_pipe *pipe,

				struct drm_crtc_state *crtc_state,

				struct drm_plane_state *plane_state)

{

	struct mipi_dbi_dev *dbidev = drm_to_mipi_dbi_dev(pipe->crtc.dev);

	struct st7735r_priv *priv = container_of(dbidev, struct st7735r_priv,

						 dbidev);

	struct mipi_dbi *dbi = &dbidev->dbi;

	int ret, idx;

	u8 addr_mode;
@@ -87,6 +105,10 @@ static void jd_t18003_t01_pipe_enable(struct drm_simple_display_pipe *pipe, 
		addr_mode = ST7735R_MY | ST7735R_MV;

		break;

	}



	if (priv->cfg->rgb)

		addr_mode |= ST7735R_RGB;



	mipi_dbi_command(dbi, MIPI_DCS_SET_ADDRESS_MODE, addr_mode);

	mipi_dbi_command(dbi, MIPI_DCS_SET_PIXEL_FORMAT,

			 MIPI_DCS_PIXEL_FMT_16BIT);
@@ -109,15 +131,19 @@ out_exit: 
	drm_dev_exit(idx);

}



static const struct drm_simple_display_pipe_funcs jd_t18003_t01_pipe_funcs = {

	.enable		= jd_t18003_t01_pipe_enable,

static const struct drm_simple_display_pipe_funcs st7735r_pipe_funcs = {

	.enable		= st7735r_pipe_enable,

	.disable	= mipi_dbi_pipe_disable,

	.update		= mipi_dbi_pipe_update,

	.prepare_fb	= drm_gem_fb_simple_display_pipe_prepare_fb,

};



static const struct drm_display_mode jd_t18003_t01_mode = {

	DRM_SIMPLE_MODE(128, 160, 28, 35),

static const struct st7735r_cfg jd_t18003_t01_cfg = {

	.mode		= { DRM_SIMPLE_MODE(128, 160, 28, 35) },

	/* Cannot read from Adafruit 1.8" display via SPI */

	.write_only	= true,

};



};



DEFINE_DRM_GEM_CMA_FOPS(st7735r_fops);
@@ -136,13 +162,13 @@ static struct drm_driver st7735r_driver = { 
};



static const struct of_device_id st7735r_of_match[] = {

	{ .compatible = "jianda,jd-t18003-t01" },

	{ .compatible = "jianda,jd-t18003-t01", .data = &jd_t18003_t01_cfg },

	{ },

};

MODULE_DEVICE_TABLE(of, st7735r_of_match);



static const struct spi_device_id st7735r_id[] = {

	{ "jd-t18003-t01", 0 },

	{ "jd-t18003-t01", (uintptr_t)&jd_t18003_t01_cfg },

	{ },

};

MODULE_DEVICE_TABLE(spi, st7735r_id);
@@ -150,17 +176,26 @@ MODULE_DEVICE_TABLE(spi, st7735r_id); 
static int st7735r_probe(struct spi_device *spi)

{

	struct device *dev = &spi->dev;

	const struct st7735r_cfg *cfg;

	struct mipi_dbi_dev *dbidev;

	struct st7735r_priv *priv;

	struct drm_device *drm;

	struct mipi_dbi *dbi;

	struct gpio_desc *dc;

	u32 rotation = 0;

	int ret;



	dbidev = kzalloc(sizeof(*dbidev), GFP_KERNEL);

	if (!dbidev)

	cfg = of_device_get_match_data(&spi->dev);

	if (!cfg)

		cfg = (void *)spi_get_device_id(spi)->driver_data;



	priv = kzalloc(sizeof(*priv), GFP_KERNEL);

	if (!priv)

		return -ENOMEM;



	dbidev = &priv->dbidev;

	priv->cfg = cfg;



	dbi = &dbidev->dbi;

	drm = &dbidev->drm;

	ret = devm_drm_dev_init(dev, drm, &st7735r_driver);
@@ -193,10 +228,14 @@ static int st7735r_probe(struct spi_device *spi) 
	if (ret)

		return ret;



	/* Cannot read from Adafruit 1.8" display via SPI */

	if (cfg->write_only)

		dbi->read_commands = NULL;



	ret = mipi_dbi_dev_init(dbidev, &jd_t18003_t01_pipe_funcs, &jd_t18003_t01_mode, rotation);

	dbidev->left_offset = cfg->left_offset;

	dbidev->top_offset = cfg->top_offset;



	ret = mipi_dbi_dev_init(dbidev, &st7735r_pipe_funcs, &cfg->mode,

				rotation);

	if (ret)

		return ret;

CRA Git | Maintained and supported by SUSTech CRA and CCSE