Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

The input protocol uses a map of types and codes to express input device values

to userspace. This document describes the types and codes and how and when they

may be used.

A single hardware event generates multiple input events. Each input event

contains the new value of a single data item. A special event type, EV_SYN, is

used to separate input events into packets of input data changes occurring at

the same moment in time. In the following, the term "event" refers to a single

input event encompassing a type, code, and value.

The input protocol is a stateful protocol. Events are emitted only when values

of event codes have changed. However, the state is maintained within the Linux

input subsystem; drivers do not need to maintain the state and may attempt to

emit unchanged values without harm. Userspace may obtain the current state of

event code values using the EVIOCG* ioctls defined in linux/input.h. The event

reports supported by a device are also provided by sysfs in

class/input/event*/device/capabilities/, and the properties of a device are

provided in class/input/event*/device/properties.

Types:

==========

Types are groupings of codes under a logical input construct. Each type has a

set of applicable codes to be used in generating events. See the Codes section

for details on valid codes for each type.

* EV_SYN:

  - Used as markers to separate events. Events may be separated in time or in

    space, such as with the multitouch protocol.

* EV_KEY:

  - Used to describe state changes of keyboards, buttons, or other key-like

    devices.

* EV_REL:

  - Used to describe relative axis value changes, e.g. moving the mouse 5 units

    to the left.

* EV_ABS:

  - Used to describe absolute axis value changes, e.g. describing the

    coordinates of a touch on a touchscreen.

* EV_MSC:

  - Used to describe miscellaneous input data that do not fit into other types.

* EV_SW:

  - Used to describe binary state input switches.

* EV_LED:

  - Used to turn LEDs on devices on and off.

* EV_SND:

  - Used to output sound to devices.

* EV_REP:

  - Used for autorepeating devices.

* EV_FF:

  - Used to send force feedback commands to an input device.

* EV_PWR:

  - A special type for power button and switch input.

* EV_FF_STATUS:

  - Used to receive force feedback device status.

Codes:

==========

Codes define the precise type of event.

EV_SYN:

----------

EV_SYN event values are undefined. Their usage is defined only by when they are

sent in the evdev event stream.

* SYN_REPORT:

  - Used to synchronize and separate events into packets of input data changes

    occurring at the same moment in time. For example, motion of a mouse may set

    the REL_X and REL_Y values for one motion, then emit a SYN_REPORT. The next

    motion will emit more REL_X and REL_Y values and send another SYN_REPORT.

* SYN_CONFIG:

  - TBD

* SYN_MT_REPORT:

  - Used to synchronize and separate touch events. See the

    multi-touch-protocol.txt document for more information.

* SYN_DROPPED:

  - Used to indicate buffer overrun in the evdev client's event queue.

    Client should ignore all events up to and including next SYN_REPORT

    event and query the device (using EVIOCG* ioctls) to obtain its

    current state.

EV_KEY:

----------

EV_KEY events take the form KEY_<name> or BTN_<name>. For example, KEY_A is used

to represent the 'A' key on a keyboard. When a key is depressed, an event with

the key's code is emitted with value 1. When the key is released, an event is

emitted with value 0. Some hardware send events when a key is repeated. These

events have a value of 2. In general, KEY_<name> is used for keyboard keys, and

BTN_<name> is used for other types of momentary switch events.

A few EV_KEY codes have special meanings:

* BTN_TOOL_<name>:

  - These codes are used in conjunction with input trackpads, tablets, and

    touchscreens. These devices may be used with fingers, pens, or other tools.

    When an event occurs and a tool is used, the corresponding BTN_TOOL_<name>

    code should be set to a value of 1. When the tool is no longer interacting

    with the input device, the BTN_TOOL_<name> code should be reset to 0. All

    trackpads, tablets, and touchscreens should use at least one BTN_TOOL_<name>

    code when events are generated.

* BTN_TOUCH:

    BTN_TOUCH is used for touch contact. While an input tool is determined to be

    within meaningful physical contact, the value of this property must be set

    to 1. Meaningful physical contact may mean any contact, or it may mean

    contact conditioned by an implementation defined property. For example, a

    touchpad may set the value to 1 only when the touch pressure rises above a

    certain value. BTN_TOUCH may be combined with BTN_TOOL_<name> codes. For

    example, a pen tablet may set BTN_TOOL_PEN to 1 and BTN_TOUCH to 0 while the

    pen is hovering over but not touching the tablet surface.

Note: For appropriate function of the legacy mousedev emulation driver,

BTN_TOUCH must be the first evdev code emitted in a synchronization frame.

Note: Historically a touch device with BTN_TOOL_FINGER and BTN_TOUCH was

interpreted as a touchpad by userspace, while a similar device without

BTN_TOOL_FINGER was interpreted as a touchscreen. For backwards compatibility

with current userspace it is recommended to follow this distinction. In the

future, this distinction will be deprecated and the device properties ioctl

EVIOCGPROP, defined in linux/input.h, will be used to convey the device type.

* BTN_TOOL_FINGER, BTN_TOOL_DOUBLETAP, BTN_TOOL_TRIPLETAP, BTN_TOOL_QUADTAP:

  - These codes denote one, two, three, and four finger interaction on a

    trackpad or touchscreen. For example, if the user uses two fingers and moves

    them on the touchpad in an effort to scroll content on screen,

    BTN_TOOL_DOUBLETAP should be set to value 1 for the duration of the motion.

    Note that all BTN_TOOL_<name> codes and the BTN_TOUCH code are orthogonal in

    purpose. A trackpad event generated by finger touches should generate events

    for one code from each group. At most only one of these BTN_TOOL_<name>

    codes should have a value of 1 during any synchronization frame.

Note: Historically some drivers emitted multiple of the finger count codes with

a value of 1 in the same synchronization frame. This usage is deprecated.

Note: In multitouch drivers, the input_mt_report_finger_count() function should

be used to emit these codes. Please see multi-touch-protocol.txt for details.

EV_REL:

----------

EV_REL events describe relative changes in a property. For example, a mouse may

move to the left by a certain number of units, but its absolute position in

space is unknown. If the absolute position is known, EV_ABS codes should be used

instead of EV_REL codes.

A few EV_REL codes have special meanings:

* REL_WHEEL, REL_HWHEEL:

  - These codes are used for vertical and horizontal scroll wheels,

    respectively.

EV_ABS:

----------

EV_ABS events describe absolute changes in a property. For example, a touchpad

may emit coordinates for a touch location.

A few EV_ABS codes have special meanings:

* ABS_DISTANCE:

  - Used to describe the distance of a tool from an interaction surface. This

    event should only be emitted while the tool is hovering, meaning in close

    proximity of the device and while the value of the BTN_TOUCH code is 0. If

    the input device may be used freely in three dimensions, consider ABS_Z

    instead.

* ABS_MT_<name>:

  - Used to describe multitouch input events. Please see

    multi-touch-protocol.txt for details.

EV_SW:

----------

EV_SW events describe stateful binary switches. For example, the SW_LID code is

used to denote when a laptop lid is closed.

Upon binding to a device or resuming from suspend, a driver must report

the current switch state. This ensures that the device, kernel, and userspace

state is in sync.

Upon resume, if the switch state is the same as before suspend, then the input

subsystem will filter out the duplicate switch state reports. The driver does

not need to keep the state of the switch at any time.

EV_MSC:

----------

EV_MSC events are used for input and output events that do not fall under other

categories.

EV_LED:

----------

EV_LED events are used for input and output to set and query the state of

various LEDs on devices.

EV_REP:

----------

EV_REP events are used for specifying autorepeating events.

EV_SND:

----------

EV_SND events are used for sending sound commands to simple sound output

devices.

EV_FF:

----------

EV_FF events are used to initialize a force feedback capable device and to cause

such device to feedback.

EV_PWR:

----------

EV_PWR events are a special type of event used specifically for power

mangement. Its usage is not well defined. To be addressed later.

Guidelines:

==========

The guidelines below ensure proper single-touch and multi-finger functionality.

For multi-touch functionality, see the multi-touch-protocol.txt document for

more information.

Mice:

----------

REL_{X,Y} must be reported when the mouse moves. BTN_LEFT must be used to report

the primary button press. BTN_{MIDDLE,RIGHT,4,5,etc.} should be used to report

further buttons of the device. REL_WHEEL and REL_HWHEEL should be used to report

scroll wheel events where available.

Touchscreens:

----------

ABS_{X,Y} must be reported with the location of the touch. BTN_TOUCH must be

used to report when a touch is active on the screen.

BTN_{MOUSE,LEFT,MIDDLE,RIGHT} must not be reported as the result of touch

contact. BTN_TOOL_<name> events should be reported where possible.

Trackpads:

----------

Legacy trackpads that only provide relative position information must report

events like mice described above.

Trackpads that provide absolute touch position must report ABS_{X,Y} for the

location of the touch. BTN_TOUCH should be used to report when a touch is active

on the trackpad. Where multi-finger support is available, BTN_TOOL_<name> should

be used to report the number of touches active on the trackpad.

Tablets:

----------

BTN_TOOL_<name> events must be reported when a stylus or other tool is active on

the tablet. ABS_{X,Y} must be reported with the location of the tool. BTN_TOUCH

should be used to report when the tool is in contact with the tablet.

BTN_{STYLUS,STYLUS2} should be used to report buttons on the tool itself. Any

button may be used for buttons on the tablet except BTN_{MOUSE,LEFT}.

BTN_{0,1,2,etc} are good generic codes for unlabeled buttons. Do not use

meaningful buttons, like BTN_FORWARD, unless the button is labeled for that

purpose on the device.

};

struct evdev_client {

	int head;

	int tail;

	unsigned int head;

	unsigned int tail;

	spinlock_t buffer_lock; /* protects access to buffer, head and tail */

	struct fasync_struct *fasync;

	struct evdev *evdev;

	struct list_head node;

	int bufsize;

	unsigned int bufsize;

	struct input_event buffer[];

};

static void evdev_pass_event(struct evdev_client *client,

			     struct input_event *event)

{

	/*

	 * Interrupts are disabled, just acquire the lock.

	 * Make sure we don't leave with the client buffer

	 * "empty" by having client->head == client->tail.

	 */

	/* Interrupts are disabled, just acquire the lock. */

	spin_lock(&client->buffer_lock);

	do {

	client->buffer[client->head++] = *event;

	client->head &= client->bufsize - 1;

	} while (client->head == client->tail);

	if (unlikely(client->head == client->tail)) {

		/*

		 * This effectively "drops" all unconsumed events, leaving

		 * EV_SYN/SYN_DROPPED plus the newest event in the queue.

		 */

		client->tail = (client->head - 2) & (client->bufsize - 1);

		client->buffer[client->tail].time = event->time;

		client->buffer[client->tail].type = EV_SYN;

		client->buffer[client->tail].code = SYN_DROPPED;

		client->buffer[client->tail].value = 0;

	}

	spin_unlock(&client->buffer_lock);

	if (event->type == EV_SYN)

}

EXPORT_SYMBOL(input_set_capability);

static unsigned int input_estimate_events_per_packet(struct input_dev *dev)

{

	int mt_slots;

	int i;

	unsigned int events;

	if (dev->mtsize) {

		mt_slots = dev->mtsize;

	} else if (test_bit(ABS_MT_TRACKING_ID, dev->absbit)) {

		mt_slots = dev->absinfo[ABS_MT_TRACKING_ID].maximum -

			   dev->absinfo[ABS_MT_TRACKING_ID].minimum + 1,

		clamp(mt_slots, 2, 32);

	} else if (test_bit(ABS_MT_POSITION_X, dev->absbit)) {

		mt_slots = 2;

	} else {

		mt_slots = 0;

	}

	events = mt_slots + 1; /* count SYN_MT_REPORT and SYN_REPORT */

	for (i = 0; i < ABS_CNT; i++) {

		if (test_bit(i, dev->absbit)) {

			if (input_is_mt_axis(i))

				events += mt_slots;

			else

				events++;

		}

	}

	for (i = 0; i < REL_CNT; i++)

		if (test_bit(i, dev->relbit))

			events++;

	return events;

}

#define INPUT_CLEANSE_BITMASK(dev, type, bits)				\

	do {								\

		if (!test_bit(EV_##type, dev->evbit))			\

	/* Make sure that bitmasks not mentioned in dev->evbit are clean. */

	input_cleanse_bitmasks(dev);

	if (!dev->hint_events_per_packet)

		dev->hint_events_per_packet =

				input_estimate_events_per_packet(dev);

	/*

	 * If delay and period are pre-set by the driver, then autorepeating

	 * is handled by the driver itself and we don't do it in input.c.

static int __devinit twl4030_kp_probe(struct platform_device *pdev)

{

	struct twl4030_keypad_data *pdata = pdev->dev.platform_data;

	const struct matrix_keymap_data *keymap_data = pdata->keymap_data;

	const struct matrix_keymap_data *keymap_data;

	struct twl4030_keypad *kp;

	struct input_dev *input;

	u8 reg;

	int error;

	if (!pdata || !pdata->rows || !pdata->cols ||

	if (!pdata || !pdata->rows || !pdata->cols || !pdata->keymap_data ||

	    pdata->rows > TWL4030_MAX_ROWS || pdata->cols > TWL4030_MAX_COLS) {

		dev_err(&pdev->dev, "Invalid platform_data\n");

		return -EINVAL;

	}

	keymap_data = pdata->keymap_data;

	kp = kzalloc(sizeof(*kp), GFP_KERNEL);

	input = input_allocate_device();

	if (!kp || !input) {

				   enum xenbus_state backend_state)

{

	struct xenkbd_info *info = dev_get_drvdata(&dev->dev);

	int val;

	int ret, val;

	switch (backend_state) {

	case XenbusStateInitialising:

	case XenbusStateInitWait:

InitWait:

		ret = xenbus_scanf(XBT_NIL, info->xbdev->otherend,

				   "feature-abs-pointer", "%d", &val);

		if (ret < 0)

			val = 0;

		if (val) {

			ret = xenbus_printf(XBT_NIL, info->xbdev->nodename,

					    "request-abs-pointer", "1");

			if (ret)

				pr_warning("xenkbd: can't request abs-pointer");

		}

		xenbus_switch_state(dev, XenbusStateConnected);

		break;