Commit 950ee4c8 authored by Guennadi Liakhovetski's avatar Guennadi Liakhovetski Committed by Greg Kroah-Hartman
Browse files

[PATCH] USB: net2282 and net2280 software compatibility 



Below is a patch to gadgets/net2280.[ch] which adds support for the
net2282 controller. The original code was kindly provided by PLX
Technology, I just merged it with the current net2280 driver in the
kernel. Tested on 2.6.15.6, but only with 2282. I did the merge, so
that the behaviour for the 2280 is unaffected (except for short delays
for extra checks).

Signed-off-by: default avatarG. Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>

Support for net2282 in net2280 driver.
parent f043ca43

drivers/usb/gadget/Kconfig

+2 −2
Original line number Diff line number Diff line
@@ -69,11 +69,11 @@ choice 
	   often need board-specific hooks.



config USB_GADGET_NET2280

	boolean "NetChip 2280"

	boolean "NetChip 228x"

	depends on PCI

	select USB_GADGET_DUALSPEED

	help

	   NetChip 2280 is a PCI based USB peripheral controller which

	   NetChip 2280 / 2282 is a PCI based USB peripheral controller which

	   supports both full and high speed USB 2.0 data transfers.  

	   

	   It has six configurable endpoints, as well as endpoint zero

drivers/usb/gadget/net2280.c

+69 −21
Original line number Diff line number Diff line
@@ -26,6 +26,8 @@ 
 * Copyright (C) 2003 David Brownell

 * Copyright (C) 2003-2005 PLX Technology, Inc.

 *

 * Modified Seth Levy 2005 PLX Technology, Inc. to provide compatibility with 2282 chip

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License as published by

 * the Free Software Foundation; either version 2 of the License, or
@@ -71,8 +73,8 @@ 
#include <asm/unaligned.h>





#define	DRIVER_DESC		"PLX NET2280 USB Peripheral Controller"

#define	DRIVER_VERSION		"2005 Feb 03"

#define	DRIVER_DESC		"PLX NET228x USB Peripheral Controller"

#define	DRIVER_VERSION		"2005 Sept 27"



#define	DMA_ADDR_INVALID	(~(dma_addr_t)0)

#define	EP_DONTUSE		13	/* nonzero */
@@ -118,7 +120,7 @@ module_param (fifo_mode, ushort, 0644); 
/* enable_suspend -- When enabled, the driver will respond to

 * USB suspend requests by powering down the NET2280.  Otherwise,

 * USB suspend requests will be ignored.  This is acceptible for

 * self-powered devices, and helps avoid some quirks.

 * self-powered devices

 */

static int enable_suspend = 0;
@@ -223,6 +225,11 @@ net2280_enable (struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc) 
	ep->is_in = (tmp & USB_DIR_IN) != 0;

	if (!ep->is_in)

		writel ((1 << SET_NAK_OUT_PACKETS), &ep->regs->ep_rsp);

	else if (dev->pdev->device != 0x2280) {

		/* Added for 2282, Don't use nak packets on an in endpoint, this was ignored on 2280 */

		writel ((1 << CLEAR_NAK_OUT_PACKETS)

			| (1 << CLEAR_NAK_OUT_PACKETS_MODE), &ep->regs->ep_rsp);

	}



	writel (tmp, &ep->regs->ep_cfg);
@@ -232,8 +239,9 @@ net2280_enable (struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc) 
		writel (tmp, &dev->regs->pciirqenb0);



		tmp = (1 << DATA_PACKET_RECEIVED_INTERRUPT_ENABLE)

			| (1 << DATA_PACKET_TRANSMITTED_INTERRUPT_ENABLE)

			| readl (&ep->regs->ep_irqenb);

			| (1 << DATA_PACKET_TRANSMITTED_INTERRUPT_ENABLE);

		if (dev->pdev->device == 0x2280)

			tmp |= readl (&ep->regs->ep_irqenb);

		writel (tmp, &ep->regs->ep_irqenb);

	} else {				/* dma, per-request */

		tmp = (1 << (8 + ep->num));	/* completion */
@@ -314,10 +322,18 @@ static void ep_reset (struct net2280_regs __iomem *regs, struct net2280_ep *ep) 
	/* init to our chosen defaults, notably so that we NAK OUT

	 * packets until the driver queues a read (+note erratum 0112)

	 */

	if (!ep->is_in || ep->dev->pdev->device == 0x2280) {

		tmp = (1 << SET_NAK_OUT_PACKETS_MODE)

		| (1 << SET_NAK_OUT_PACKETS)

		| (1 << CLEAR_EP_HIDE_STATUS_PHASE)

		| (1 << CLEAR_INTERRUPT_MODE);

	} else {

		/* added for 2282 */

		tmp = (1 << CLEAR_NAK_OUT_PACKETS_MODE)

		| (1 << CLEAR_NAK_OUT_PACKETS)

		| (1 << CLEAR_EP_HIDE_STATUS_PHASE)

		| (1 << CLEAR_INTERRUPT_MODE);

	}



	if (ep->num != 0) {

		tmp |= (1 << CLEAR_ENDPOINT_TOGGLE)
@@ -326,14 +342,18 @@ static void ep_reset (struct net2280_regs __iomem *regs, struct net2280_ep *ep) 
	writel (tmp, &ep->regs->ep_rsp);



	/* scrub most status bits, and flush any fifo state */

	writel (  (1 << TIMEOUT)

	if (ep->dev->pdev->device == 0x2280)

		tmp = (1 << FIFO_OVERFLOW)

			| (1 << FIFO_UNDERFLOW);

	else

		tmp = 0;



	writel (tmp | (1 << TIMEOUT)

		| (1 << USB_STALL_SENT)

		| (1 << USB_IN_NAK_SENT)

		| (1 << USB_IN_ACK_RCVD)

		| (1 << USB_OUT_PING_NAK_SENT)

		| (1 << USB_OUT_ACK_SENT)

		| (1 << FIFO_OVERFLOW)

		| (1 << FIFO_UNDERFLOW)

		| (1 << FIFO_FLUSH)

		| (1 << SHORT_PACKET_OUT_DONE_INTERRUPT)

		| (1 << SHORT_PACKET_TRANSFERRED_INTERRUPT)
@@ -718,7 +738,7 @@ fill_dma_desc (struct net2280_ep *ep, struct net2280_request *req, int valid) 
	 */

	if (ep->is_in)

		dmacount |= (1 << DMA_DIRECTION);

	else if ((dmacount % ep->ep.maxpacket) != 0)

	if ((!ep->is_in && (dmacount % ep->ep.maxpacket) != 0) || ep->dev->pdev->device != 0x2280)

		dmacount |= (1 << END_OF_CHAIN);



	req->valid = valid;
@@ -760,9 +780,12 @@ static inline void stop_dma (struct net2280_dma_regs __iomem *dma) 
static void start_queue (struct net2280_ep *ep, u32 dmactl, u32 td_dma)

{

	struct net2280_dma_regs	__iomem *dma = ep->dma;

	unsigned int tmp = (1 << VALID_BIT) | (ep->is_in << DMA_DIRECTION);



	if (ep->dev->pdev->device != 0x2280)

		tmp |= (1 << END_OF_CHAIN);



	writel ((1 << VALID_BIT) | (ep->is_in << DMA_DIRECTION),

			&dma->dmacount);

	writel (tmp, &dma->dmacount);

	writel (readl (&dma->dmastat), &dma->dmastat);



	writel (td_dma, &dma->dmadesc);
@@ -2110,7 +2133,11 @@ static void handle_ep_small (struct net2280_ep *ep) 
	VDEBUG (ep->dev, "%s ack ep_stat %08x, req %p\n",

			ep->ep.name, t, req ? &req->req : 0);

#endif

	if (!ep->is_in || ep->dev->pdev->device == 0x2280)

		writel (t & ~(1 << NAK_OUT_PACKETS), &ep->regs->ep_stat);

	else

		/* Added for 2282 */

		writel (t, &ep->regs->ep_stat);



	/* for ep0, monitor token irqs to catch data stage length errors

	 * and to synchronize on status.
@@ -2337,7 +2364,7 @@ static void handle_stat0_irqs (struct net2280 *dev, u32 stat) 
			u32			raw [2];

			struct usb_ctrlrequest	r;

		} u;

		int				tmp = 0;

		int				tmp;

		struct net2280_request		*req;



		if (dev->gadget.speed == USB_SPEED_UNKNOWN) {
@@ -2364,14 +2391,19 @@ static void handle_stat0_irqs (struct net2280 *dev, u32 stat) 
		}

		ep->stopped = 0;

		dev->protocol_stall = 0;

		writel (  (1 << TIMEOUT)



		if (ep->dev->pdev->device == 0x2280)

			tmp = (1 << FIFO_OVERFLOW)

				| (1 << FIFO_UNDERFLOW);

		else

			tmp = 0;



		writel (tmp | (1 << TIMEOUT)

			| (1 << USB_STALL_SENT)

			| (1 << USB_IN_NAK_SENT)

			| (1 << USB_IN_ACK_RCVD)

			| (1 << USB_OUT_PING_NAK_SENT)

			| (1 << USB_OUT_ACK_SENT)

			| (1 << FIFO_OVERFLOW)

			| (1 << FIFO_UNDERFLOW)

			| (1 << SHORT_PACKET_OUT_DONE_INTERRUPT)

			| (1 << SHORT_PACKET_TRANSFERRED_INTERRUPT)

			| (1 << DATA_PACKET_RECEIVED_INTERRUPT)
@@ -2385,6 +2417,8 @@ static void handle_stat0_irqs (struct net2280 *dev, u32 stat) 
		cpu_to_le32s (&u.raw [0]);

		cpu_to_le32s (&u.raw [1]);



		tmp = 0;



#define	w_value		le16_to_cpup (&u.r.wValue)

#define	w_index		le16_to_cpup (&u.r.wIndex)

#define	w_length	le16_to_cpup (&u.r.wLength)
@@ -2594,10 +2628,17 @@ static void handle_stat1_irqs (struct net2280 *dev, u32 stat) 
		writel (stat, &dev->regs->irqstat1);



	/* some status we can just ignore */

	if (dev->pdev->device == 0x2280)

		stat &= ~((1 << CONTROL_STATUS_INTERRUPT)

			  | (1 << SUSPEND_REQUEST_INTERRUPT)

			  | (1 << RESUME_INTERRUPT)

			  | (1 << SOF_INTERRUPT));

	else

		stat &= ~((1 << CONTROL_STATUS_INTERRUPT)

			  | (1 << RESUME_INTERRUPT)

			  | (1 << SOF_DOWN_INTERRUPT)

			  | (1 << SOF_INTERRUPT));



	if (!stat)

		return;

	// DEBUG (dev, "irqstat1 %08x\n", stat);
@@ -2939,6 +2980,13 @@ static struct pci_device_id pci_ids [] = { { 
	.device =	0x2280,

	.subvendor =	PCI_ANY_ID,

	.subdevice =	PCI_ANY_ID,

}, {

	.class = 	((PCI_CLASS_SERIAL_USB << 8) | 0xfe),

	.class_mask = 	~0,

	.vendor =	0x17cc,

	.device =	0x2282,

	.subvendor =	PCI_ANY_ID,

	.subdevice =	PCI_ANY_ID,



}, { /* end: all zeroes */ }

};

drivers/usb/gadget/net2280.h

+2 −0
Original line number Diff line number Diff line
@@ -179,6 +179,7 @@ struct net2280_regs { 
#define     PCI_TARGET_ABORT_RECEIVED_INTERRUPT                 19

#define     PCI_RETRY_ABORT_INTERRUPT                           17

#define     PCI_MASTER_CYCLE_DONE_INTERRUPT                     16

#define     SOF_DOWN_INTERRUPT                                  14

#define     GPIO_INTERRUPT                                      13

#define     DMA_D_INTERRUPT                                     12

#define     DMA_C_INTERRUPT                                     11
@@ -346,6 +347,7 @@ struct net2280_dma_regs { /* [11.7] */ 
#define     DMA_ENABLE                                          1

#define     DMA_ADDRESS_HOLD                                    0

	u32		dmastat;

#define     DMA_ABORT_DONE_INTERRUPT                            27

#define     DMA_SCATTER_GATHER_DONE_INTERRUPT                   25

#define     DMA_TRANSACTION_DONE_INTERRUPT                      24

#define     DMA_ABORT                                           1

CRA Git | Maintained and supported by SUSTech CRA and CCSE