Commit 94cafe1b authored by Manivannan Sadhasivam's avatar Manivannan Sadhasivam Committed by Alexandre Torgue
Browse files

ARM: dts: stm32: Add Avenger96 devicetree support based on STM32MP157A 

Add devicetree support for Avenger96 board based on STM32MP157A MPU
from ST Micro. This board is one of the 96Boards Consumer Edition board
from Arrow Electronics and has the following features:

SoC: STM32MP157AAC
PMIC: STPMIC1A
RAM: 1024 Mbyte @ 533MHz
Storage: eMMC v4.51: 8 Gbyte
         microSD Socket: UHS-1 v3.01
Ethernet Port: 10/100/1000 Mbit/s, IEEE 802.3 Compliant
Wireless: WiFi 5 GHz & 2.4GHz IEEE 802.11a/b/g/n/ac
          Bluetooth®v4.2 (BR/EDR/BLE)
USB: 2x Type A (USB 2.0) Host and 1x Micro B (USB 2.0) OTG
Display: HDMI: WXGA (1366x768)@ 60 fps, HDMI 1.4
LED: 4x User LED, 1x WiFi LED, 1x BT LED

More information about this board can be found in 96Boards website:
https://www.96boards.org/product/avenger96/



Signed-off-by: default avatarManivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: default avatarAlexandre Torgue <alexandre.torgue@st.com>
parent 861ca2d3

arch/arm/boot/dts/Makefile

+1 −0
Original line number Diff line number Diff line
@@ -975,6 +975,7 @@ dtb-$(CONFIG_ARCH_STM32) += \ 
	stm32746g-eval.dtb \

	stm32h743i-eval.dtb \

	stm32h743i-disco.dtb \

	stm32mp157a-avenger96.dtb \

	stm32mp157a-dk1.dtb \

	stm32mp157c-dk2.dtb \

	stm32mp157c-ed1.dtb \

arch/arm/boot/dts/stm32mp157a-avenger96.dts

0 → 100644
+321 −0
Original line number Diff line number Diff line 
// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)

/*

 * Copyright (C) Linaro Ltd 2019 - All Rights Reserved

 * Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

 */



/dts-v1/;



#include "stm32mp157c.dtsi"

#include "stm32mp157xac-pinctrl.dtsi"

#include <dt-bindings/gpio/gpio.h>

#include <dt-bindings/mfd/st,stpmic1.h>



/ {

	model = "Arrow Electronics STM32MP157A Avenger96 board";

	compatible = "arrow,stm32mp157a-avenger96", "st,stm32mp157";



	aliases {

		ethernet0 = &ethernet0;

		mmc0 = &sdmmc1;

		serial0 = &uart4;

		serial1 = &uart7;

	};



	chosen {

		stdout-path = "serial0:115200n8";

	};



	memory@c0000000 {

		device_type = "memory";

		reg = <0xc0000000 0x40000000>;

	};



	led {

		compatible = "gpio-leds";

		led1 {

			label = "green:user1";

			gpios = <&gpioz 7 GPIO_ACTIVE_HIGH>;

			linux,default-trigger = "heartbeat";

			default-state = "off";

		};



		led2 {

			label = "green:user2";

			gpios = <&gpiof 3 GPIO_ACTIVE_HIGH>;

			linux,default-trigger = "mmc0";

			default-state = "off";

		};



		led3 {

			label = "green:user3";

			gpios = <&gpiog 0 GPIO_ACTIVE_HIGH>;

			linux,default-trigger = "mmc1";

			default-state = "off";

		};



		led4 {

			label = "green:user3";

			gpios = <&gpiog 1 GPIO_ACTIVE_HIGH>;

			linux,default-trigger = "none";

			default-state = "off";

			panic-indicator;

		};



		led5 {

			label = "yellow:wifi";

			gpios = <&gpioz 3 GPIO_ACTIVE_HIGH>;

			linux,default-trigger = "phy0tx";

			default-state = "off";

		};



		led6 {

			label = "blue:bt";

			gpios = <&gpioz 6 GPIO_ACTIVE_HIGH>;

			linux,default-trigger = "bluetooth-power";

			default-state = "off";

		};

	};

};



&ethernet0 {

	status = "okay";

	pinctrl-0 = <&ethernet0_rgmii_pins_a>;

	pinctrl-1 = <&ethernet0_rgmii_pins_sleep_a>;

	pinctrl-names = "default", "sleep";

	phy-mode = "rgmii";

	max-speed = <1000>;

	phy-handle = <&phy0>;



	mdio0 {

		#address-cells = <1>;

		#size-cells = <0>;

		compatible = "snps,dwmac-mdio";

		phy0: ethernet-phy@7 {

			reg = <7>;

		};

	};

};



&i2c1 {

	pinctrl-names = "default";

	pinctrl-0 = <&i2c1_pins_b>;

	i2c-scl-rising-time-ns = <185>;

	i2c-scl-falling-time-ns = <20>;

	status = "okay";

	/delete-property/dmas;

	/delete-property/dma-names;

};



&i2c2 {

	pinctrl-names = "default";

	pinctrl-0 = <&i2c2_pins_b1 &i2c2_pins_b2>;

	i2c-scl-rising-time-ns = <185>;

	i2c-scl-falling-time-ns = <20>;

	status = "okay";

	/delete-property/dmas;

	/delete-property/dma-names;

};



&i2c4 {

	pinctrl-names = "default";

	pinctrl-0 = <&i2c4_pins_a>;

	i2c-scl-rising-time-ns = <185>;

	i2c-scl-falling-time-ns = <20>;

	status = "okay";

	/delete-property/dmas;

	/delete-property/dma-names;



	pmic: stpmic@33 {

		compatible = "st,stpmic1";

		reg = <0x33>;

		interrupts-extended = <&exti 55 IRQ_TYPE_EDGE_FALLING>;

		interrupt-controller;

		#interrupt-cells = <2>;

		status = "okay";



		st,main-control-register = <0x04>;

		st,vin-control-register = <0xc0>;

		st,usb-control-register = <0x30>;



		regulators {

			compatible = "st,stpmic1-regulators";



			ldo1-supply = <&v3v3>;

			ldo2-supply = <&v3v3>;

			ldo3-supply = <&vdd_ddr>;

			ldo5-supply = <&v3v3>;

			ldo6-supply = <&v3v3>;

			pwr_sw1-supply = <&bst_out>;

			pwr_sw2-supply = <&bst_out>;



			vddcore: buck1 {

				regulator-name = "vddcore";

				regulator-min-microvolt = <1200000>;

				regulator-max-microvolt = <1350000>;

				regulator-always-on;

				regulator-initial-mode = <0>;

				regulator-over-current-protection;

			};



			vdd_ddr: buck2 {

				regulator-name = "vdd_ddr";

				regulator-min-microvolt = <1350000>;

				regulator-max-microvolt = <1350000>;

				regulator-always-on;

				regulator-initial-mode = <0>;

				regulator-over-current-protection;

			};



			vdd: buck3 {

				regulator-name = "vdd";

				regulator-min-microvolt = <3300000>;

				regulator-max-microvolt = <3300000>;

				regulator-always-on;

				st,mask_reset;

				regulator-initial-mode = <0>;

				regulator-over-current-protection;

			};



			v3v3: buck4 {

				regulator-name = "v3v3";

				regulator-min-microvolt = <3300000>;

				regulator-max-microvolt = <3300000>;

				regulator-always-on;

				regulator-over-current-protection;

				regulator-initial-mode = <0>;

			};



			vdda: ldo1 {

				regulator-name = "vdda";

				regulator-min-microvolt = <2900000>;

				regulator-max-microvolt = <2900000>;

				interrupts = <IT_CURLIM_LDO1 0>;

				interrupt-parent = <&pmic>;

			};



			v2v8: ldo2 {

				regulator-name = "v2v8";

				regulator-min-microvolt = <2800000>;

				regulator-max-microvolt = <2800000>;

				interrupts = <IT_CURLIM_LDO2 0>;

				interrupt-parent = <&pmic>;

			};



			vtt_ddr: ldo3 {

				regulator-name = "vtt_ddr";

				regulator-min-microvolt = <500000>;

				regulator-max-microvolt = <750000>;

				regulator-always-on;

				regulator-over-current-protection;

			};



			vdd_usb: ldo4 {

				regulator-name = "vdd_usb";

				regulator-min-microvolt = <3300000>;

				regulator-max-microvolt = <3300000>;

				interrupts = <IT_CURLIM_LDO4 0>;

				interrupt-parent = <&pmic>;

			};



			vdd_sd: ldo5 {

				regulator-name = "vdd_sd";

				regulator-min-microvolt = <2900000>;

				regulator-max-microvolt = <2900000>;

				interrupts = <IT_CURLIM_LDO5 0>;

				interrupt-parent = <&pmic>;

				regulator-boot-on;

			};



			v1v8: ldo6 {

				regulator-name = "v1v8";

				regulator-min-microvolt = <1800000>;

				regulator-max-microvolt = <1800000>;

				interrupts = <IT_CURLIM_LDO6 0>;

				interrupt-parent = <&pmic>;

				regulator-enable-ramp-delay = <300000>;

			};



			vref_ddr: vref_ddr {

				regulator-name = "vref_ddr";

				regulator-always-on;

				regulator-over-current-protection;

			};



			bst_out: boost {

				regulator-name = "bst_out";

				interrupts = <IT_OCP_BOOST 0>;

				interrupt-parent = <&pmic>;

			};



			vbus_otg: pwr_sw1 {

				regulator-name = "vbus_otg";

				interrupts = <IT_OCP_OTG 0>;

				interrupt-parent = <&pmic>;

				regulator-active-discharge;

			};



			vbus_sw: pwr_sw2 {

				regulator-name = "vbus_sw";

				interrupts = <IT_OCP_SWOUT 0>;

				interrupt-parent = <&pmic>;

				regulator-active-discharge;

			};

		};



		onkey {

			compatible = "st,stpmic1-onkey";

			interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 1>;

			interrupt-names = "onkey-falling", "onkey-rising";

			status = "okay";

		};



		watchdog {

			compatible = "st,stpmic1-wdt";

			status = "disabled";

		};

	};

};



&iwdg2 {

	timeout-sec = <32>;

	status = "okay";

};



&rng1 {

	status = "okay";

};



&rtc {

	status = "okay";

};



&sdmmc1 {

	pinctrl-names = "default", "opendrain", "sleep";

	pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>;

	pinctrl-1 = <&sdmmc1_b4_od_pins_a>;

	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;

	broken-cd;

	st,sig-dir;

	st,neg-edge;

	st,use-ckin;

	bus-width = <4>;

	vmmc-supply = <&vdd_sd>;

	status = "okay";

};



&uart4 {

	/* On Low speed expansion header */

	label = "LS-UART1";

	pinctrl-names = "default";

	pinctrl-0 = <&uart4_pins_b>;

	status = "okay";

};



&uart7 {

	/* On Low speed expansion header */

	label = "LS-UART0";

	pinctrl-names = "default";

	pinctrl-0 = <&uart7_pins_a>;

	status = "okay";

};

CRA Git | Maintained and supported by SUSTech CRA and CCSE