+99
−46
Loading
Gitlab 现已全面支持 git over ssh 与 git over https。通过 HTTPS 访问请配置带有 read_repository / write_repository 权限的 Personal access token。通过 SSH 端口访问请使用 22 端口或 13389 端口。如果使用CAS注册了账户但不知道密码,可以自行至设置中更改;如有其他问题,请发邮件至 service@cra.moe 寻求协助。
On Odroid XU3/4 and other Exynos5422 based boards there is a case, that different devices on the board are supplied by different regulators with non-fixed voltages. If one of these devices temporarily requires higher voltage, there might occur a situation that the spread between two devices' voltages is so high, that there is a risk of changing 'high' and 'low' states on the interconnection between devices powered by those regulators. Uncoupled regulators should be a special case of coupled regulators, so they should share a common voltage setting path. When enabling, disabling or setting voltage of a coupled regulator, all coupled regulators should be locked. Regulator's supplies should be locked, when setting voltage of a single regulator. Enabling a coupled regulator or setting its voltage should not be possible if some of its coupled regulators, has not been registered. Add function for locking coupled regulators and supplies. Extract a new function regulator_set_voltage_rdev() from regulator_set_voltage_unlocked(), which is called when setting voltage of a single regulator. Signed-off-by:Maciej Purski <m.purski@samsung.com> Signed-off-by:
Dmitry Osipenko <digetx@gmail.com> Signed-off-by:
Mark Brown <broonie@kernel.org>
CRA Git | Maintained and supported by SUSTech CRA and CCSE