Commit 923dd2a4 authored by Jesper Nilsson's avatar Jesper Nilsson
Browse files

CRIS: Rearrange Kconfigs for v10 and v32 to allow compilation without warnings. 

- Remove some unneeded configs and add some new ones.
- Merge common config items to common file instead of duplicating them.
- Pull in standard Kconfig.preempt.
- Remove some unneeded Kconfigs for subsystems not (yet) available on CRIS
  (md, scsi, ieee1394, i2o, isdn, telephony, media, pcmcia, pci)
- Rename CRISv32 config items which had different types from CRISv10.
  (ETRAX_LED2G, ETRAX_LED2R, ETRAX_LED3G, ETRAX_LED3R, ETRAX_I2C_DATA_PORT,
  ETRAX_I2C_CLK_PORT)
parent a4ffc0a0

arch/cris/Kconfig

+443 −40
Original line number Diff line number Diff line
@@ -13,10 +13,6 @@ config ZONE_DMA 
	bool

	default y



config NO_DMA

	bool

	default y



config RWSEM_GENERIC_SPINLOCK

	bool

	default y
@@ -24,6 +20,10 @@ config RWSEM_GENERIC_SPINLOCK 
config RWSEM_XCHGADD_ALGORITHM

	bool



config GENERIC_IOMAP

       bool

       default y



config ARCH_HAS_ILOG2_U32

	bool

	default n
@@ -44,13 +44,16 @@ config GENERIC_CALIBRATE_DELAY 
	bool

	default y



config IRQ_PER_CPU

	bool

	default y



config NO_IOPORT

	def_bool y



config NO_IOMEM

	def_bool y



config FORCE_MAX_ZONEORDER

	int

	default 6



config CRIS

	bool

	default y
@@ -93,17 +96,15 @@ config ETRAX_FAST_TIMER 
	 timers).

	 This is needed if CONFIG_ETRAX_SERIAL_FAST_TIMER is enabled.



config PREEMPT

	bool "Preemptible Kernel"

config ETRAX_KMALLOCED_MODULES

	bool "Enable module allocation with kmalloc"

	help

	  This option reduces the latency of the kernel when reacting to

	  real-time or interactive events by allowing a low priority process to

	  be preempted even if it is in kernel mode executing a system call.

	  This allows applications to run more reliably even when the system is

	  under load.

	  Enable module allocation with kmalloc instead of vmalloc.



config OOM_REBOOT

       bool "Enable reboot at out of memory"



	  Say Y here if you are building a kernel for a desktop, embedded

	  or real-time system.  Say N if you are unsure.

source "kernel/Kconfig.preempt"



source mm/Kconfig
@@ -130,24 +131,124 @@ config SVINTO_SIM 
	help

	  Support the xsim ETRAX Simulator.



config ETRAXFS

	bool "ETRAX-FS-V32"

	help

	  Support CRIS V32.



config CRIS_MACH_ARTPEC3

        bool "ARTPEC-3"

        help

          Support Axis ARTPEC-3.



endchoice



config ETRAX_VCS_SIM

	bool "VCS Simulator"

	help

	  Setup hardware to be run in the VCS simulator.



config ETRAX_ARCH_V10

       bool

       default y if ETRAX100LX || ETRAX100LX_V2

       default n if !(ETRAX100LX || ETRAX100LX_V2)



config ETRAX_ARCH_V32

       bool

       default y if (ETRAXFS || CRIS_MACH_ARTPEC3)

       default n if !(ETRAXFS || CRIS_MACH_ARTPEC3)



config ETRAX_DRAM_SIZE

	int "DRAM size (dec, in MB)"

	default "8"

	help

	  Size of DRAM (decimal in MB) typically 2, 8 or 16.



config ETRAX_VMEM_SIZE

       int "Video memory size (dec, in MB)"

       depends on ETRAX_ARCH_V32 && !ETRAXFS

       default 8 if !ETRAXFS

       help

	Size of Video accessible memory (decimal, in MB).



config ETRAX_FLASH_BUSWIDTH

	int "Buswidth of flash in bytes"

	int "Buswidth of NOR flash in bytes"

	default "2"

	help

	  Width in bytes of the Flash bus (1, 2 or 4). Is usually 2.

	  Width in bytes of the NOR Flash bus (1, 2 or 4). Is usually 2.



config ETRAX_NANDFLASH_BUSWIDTH

	int "Buswidth of NAND flash in bytes"

	default "1"

	help

	  Width in bytes of the NAND flash (1 or 2).



config ETRAX_FLASH1_SIZE

       int "FLASH1 size (dec, in MB. 0 = Unknown)"

       default "0"



choice

	prompt "Product debug-port"

	default ETRAX_DEBUG_PORT0



config ETRAX_DEBUG_PORT0

	bool "Serial-0"

	help

	  Choose a serial port for the ETRAX debug console.  Default to

	  port 0.



config ETRAX_DEBUG_PORT1

	bool "Serial-1"

	help

	  Use serial port 1 for the console.



config ETRAX_DEBUG_PORT2

	bool "Serial-2"

	help

	  Use serial port 2 for the console.



config ETRAX_DEBUG_PORT3

	bool "Serial-3"

	help

	  Use serial port 3 for the console.



config ETRAX_DEBUG_PORT_NULL

	bool "disabled"

	help

	  Disable serial-port debugging.



endchoice



choice

	prompt "Kernel GDB port"

	depends on ETRAX_KGDB

	default ETRAX_KGDB_PORT0

	help

	  Choose a serial port for kernel debugging.  NOTE: This port should

	  not be enabled under Drivers for built-in interfaces (as it has its

	  own initialization code) and should not be the same as the debug port.



config ETRAX_KGDB_PORT0

	bool "Serial-0"

	help

	  Use serial port 0 for kernel debugging.



config ETRAX_KGDB_PORT1

	bool "Serial-1"

	help

	  Use serial port 1 for kernel debugging.



config ETRAX_KGDB_PORT2

	bool "Serial-2"

	help

	  Use serial port 2 for kernel debugging.



config ETRAX_KGDB_PORT3

	bool "Serial-3"

	help

	  Use serial port 3 for kernel debugging.



endchoice



source arch/cris/arch-v10/Kconfig

source arch/cris/arch-v32/Kconfig
@@ -161,6 +262,329 @@ menu "Drivers for built-in interfaces" 
source arch/cris/arch-v10/drivers/Kconfig

source arch/cris/arch-v32/drivers/Kconfig



choice

	prompt "RTC chip"

	depends on ETRAX_RTC

	default ETRAX_PCF8563 if ETRAX_ARCH_V32

	default ETRAX_DS1302 if ETRAX_ARCH_V10



config ETRAX_DS1302

	depends on ETRAX_ARCH_V10

	bool "DS1302"

	help

	  Enables the driver for the DS1302 Real-Time Clock battery-backed

	  chip on some products.



config ETRAX_PCF8563

	bool "PCF8563"

	help

	  Enables the driver for the PCF8563 Real-Time Clock battery-backed

	  chip on some products.



endchoice



choice

	prompt "Network LED behavior"

	depends on ETRAX_ETHERNET

	default ETRAX_NETWORK_LED_ON_WHEN_ACTIVITY



config ETRAX_NETWORK_LED_ON_WHEN_LINK

	bool "LED_on_when_link"

	help

	  Selecting LED_on_when_link will light the LED when there is a

	  connection and will flash off when there is activity.



	  Selecting LED_on_when_activity will light the LED only when

	  there is activity.



	  This setting will also affect the behaviour of other activity LEDs

	  e.g. Bluetooth.



config ETRAX_NETWORK_LED_ON_WHEN_ACTIVITY

	bool "LED_on_when_activity"

	help

	  Selecting LED_on_when_link will light the LED when there is a

	  connection and will flash off when there is activity.



	  Selecting LED_on_when_activity will light the LED only when

	  there is activity.



	  This setting will also affect the behaviour of other activity LEDs

	  e.g. Bluetooth.



endchoice



choice

	prompt "Ser0 DMA out channel"

	depends on ETRAX_SERIAL_PORT0

	default ETRAX_SERIAL_PORT0_DMA6_OUT if ETRAX_ARCH_V32

	default ETRAX_SERIAL_PORT0_NO_DMA_OUT if ETRAX_ARCH_V10



config ETRAX_SERIAL_PORT0_NO_DMA_OUT

	bool "Ser0 uses no DMA for output"

	help

	  Do not use DMA for ser0 output.



config ETRAX_SERIAL_PORT0_DMA6_OUT

	bool "Ser0 uses DMA6 for output"

	depends on ETRAXFS

	help

	  Enables the DMA6 output channel for ser0 (ttyS0).

	  If you do not enable DMA, an interrupt for each character will be

	  used when transmitting data.

	  Normally you want to use DMA, unless you use the DMA channel for

	  something else.



config ETRAX_SERIAL_PORT0_DMA0_OUT

	bool "Ser0 uses DMA0 for output"

	depends on CRIS_MACH_ARTPEC3

	help

	  Enables the DMA0 output channel for ser0 (ttyS0).

	  If you do not enable DMA, an interrupt for each character will be

	  used when transmitting data.

	  Normally you want to use DMA, unless you use the DMA channel for

	  something else.



endchoice



choice

	prompt "Ser0 DMA in channel "

	depends on ETRAX_SERIAL_PORT0

	default ETRAX_SERIAL_PORT0_NO_DMA_IN if ETRAX_ARCH_V32

	default ETRAX_SERIAL_PORT0_DMA7_IN if ETRAX_ARCH_V10

	help

	  What DMA channel to use for ser0.



config ETRAX_SERIAL_PORT0_NO_DMA_IN

	bool "Ser0 uses no DMA for input"

	help

	  Do not use DMA for ser0 input.



config ETRAX_SERIAL_PORT0_DMA7_IN

	bool "Ser0 uses DMA7 for input"

	depends on ETRAXFS

	help

	  Enables the DMA7 input channel for ser0 (ttyS0).

	  If you do not enable DMA, an interrupt for each character will be

	  used when receiving data.

	  Normally you want to use DMA, unless you use the DMA channel for

	  something else.



config ETRAX_SERIAL_PORT0_DMA1_IN

	bool "Ser0 uses DMA1 for input"

	depends on CRIS_MACH_ARTPEC3

	help

	  Enables the DMA1 input channel for ser0 (ttyS0).

	  If you do not enable DMA, an interrupt for each character will be

	  used when receiveing data.

	  Normally you want to use DMA, unless you use the DMA channel for

	  something else.



endchoice



choice

	prompt "Ser1 DMA in channel "

	depends on ETRAX_SERIAL_PORT1

	default ETRAX_SERIAL_PORT1_NO_DMA_IN if ETRAX_ARCH_V32

	default ETRAX_SERIAL_PORT1_DMA9_IN if ETRAX_ARCH_V10

	help

	  What DMA channel to use for ser1.



config ETRAX_SERIAL_PORT1_NO_DMA_IN

	bool "Ser1 uses no DMA for input"

	help

	  Do not use DMA for ser1 input.



config ETRAX_SERIAL_PORT1_DMA5_IN

	bool "Ser1 uses DMA5 for input"

	depends on ETRAX_ARCH_V32

	help

	  Enables the DMA5 input channel for ser1 (ttyS1).

	  If you do not enable DMA, an interrupt for each character will be

	  used when receiving data.

	  Normally you want this on, unless you use the DMA channel for

	  something else.



config ETRAX_SERIAL_PORT1_DMA9_IN

	depends on ETRAX_ARCH_V10

	bool "Ser1 uses DMA9 for input"



endchoice





choice

	prompt "Ser1 DMA out channel"

	depends on ETRAX_SERIAL_PORT1

	default ETRAX_SERIAL_PORT1_NO_DMA_OUT if ETRAX_ARCH_V32

	default ETRAX_SERIAL_PORT1_DMA8_OUT if ETRAX_ARCH_V10

	help

	  What DMA channel to use for ser1.



config ETRAX_SERIAL_PORT1_NO_DMA_OUT

	bool "Ser1 uses no DMA for output"

	help

	  Do not use DMA for ser1 output.



config ETRAX_SERIAL_PORT1_DMA8_OUT

	depends on ETRAX_ARCH_V10

	bool "Ser1 uses DMA8 for output"



config ETRAX_SERIAL_PORT1_DMA4_OUT

	depends on ETRAX_ARCH_V32

	bool "Ser1 uses DMA4 for output"

	help

	  Enables the DMA4 output channel for ser1 (ttyS1).

	  If you do not enable DMA, an interrupt for each character will be

	  used when transmitting data.

	  Normally you want this on, unless you use the DMA channel for

	  something else.



endchoice



choice

	prompt "Ser2 DMA out channel"

	depends on ETRAX_SERIAL_PORT2

	default ETRAX_SERIAL_PORT2_NO_DMA_OUT if ETRAX_ARCH_V32

	default ETRAX_SERIAL_PORT2_DMA2_OUT if ETRAX_ARCH_V10



config ETRAX_SERIAL_PORT2_NO_DMA_OUT

	bool "Ser2 uses no DMA for output"

	help

	  Do not use DMA for ser2 output.



config ETRAX_SERIAL_PORT2_DMA2_OUT

	bool "Ser2 uses DMA2 for output"

	depends on ETRAXFS || ETRAX_ARCH_V10

	help

	  Enables the DMA2 output channel for ser2 (ttyS2).

	  If you do not enable DMA, an interrupt for each character will be

	  used when transmitting data.

	  Normally you want to use DMA, unless you use the DMA channel for

	  something else.



config ETRAX_SERIAL_PORT2_DMA6_OUT

	bool "Ser2 uses DMA6 for output"

	depends on CRIS_MACH_ARTPEC3

	help

	  Enables the DMA6 output channel for ser2 (ttyS2).

	  If you do not enable DMA, an interrupt for each character will be

	  used when transmitting data.

	  Normally you want to use DMA, unless you use the DMA channel for

	  something else.



endchoice



choice

	prompt "Ser2 DMA in channel"

	depends on ETRAX_SERIAL_PORT2

	default ETRAX_SERIAL_PORT2_NO_DMA_IN if ETRAX_ARCH_V32

	default ETRAX_SERIAL_PORT2_DMA3_IN if ETRAX_ARCH_V10

	help

	  What DMA channel to use for ser2.



config ETRAX_SERIAL_PORT2_NO_DMA_IN

	bool "Ser2 uses no DMA for input"

	help

	  Do not use DMA for ser2 input.



config ETRAX_SERIAL_PORT2_DMA3_IN

	bool "Ser2 uses DMA3 for input"

	depends on ETRAXFS || ETRAX_ARCH_V10

	help

	  Enables the DMA3 input channel for ser2 (ttyS2).

	  If you do not enable DMA, an interrupt for each character will be

	  used when receiving data.

	  Normally you want to use DMA, unless you use the DMA channel for

	  something else.



config ETRAX_SERIAL_PORT2_DMA7_IN

	bool "Ser2 uses DMA7 for input"

	depends on CRIS_MACH_ARTPEC3

	help

	  Enables the DMA7 input channel for ser2 (ttyS2).

	  If you do not enable DMA, an interrupt for each character will be

	  used when receiveing data.

	  Normally you want to use DMA, unless you use the DMA channel for

	  something else.



endchoice



choice

	prompt "Ser3 DMA in channel"

	depends on ETRAX_SERIAL_PORT3

	default ETRAX_SERIAL_PORT3_NO_DMA_IN if ETRAX_ARCH_V32

	default ETRAX_SERIAL_PORT3_DMA5_IN if ETRAX_ARCH_V10

	help

	  What DMA channel to use for ser3.



config ETRAX_SERIAL_PORT3_NO_DMA_IN

	bool "Ser3 uses no DMA for input"

	help

	  Do not use DMA for ser3 input.



config ETRAX_SERIAL_PORT3_DMA5_IN

	depends on ETRAX_ARCH_V10

	bool "DMA 5"



config ETRAX_SERIAL_PORT3_DMA9_IN

	bool "Ser3 uses DMA9 for input"

	depends on ETRAXFS

	help

	  Enables the DMA9 input channel for ser3 (ttyS3).

	  If you do not enable DMA, an interrupt for each character will be

	  used when receiving data.

	  Normally you want to use DMA, unless you use the DMA channel for

	  something else.



config ETRAX_SERIAL_PORT3_DMA3_IN

	bool "Ser3 uses DMA3 for input"

	depends on CRIS_MACH_ARTPEC3

	help

	  Enables the DMA3 input channel for ser3 (ttyS3).

	  If you do not enable DMA, an interrupt for each character will be

	  used when receiveing data.

	  Normally you want to use DMA, unless you use the DMA channel for

	  something else.



endchoice



choice

	prompt "Ser3 DMA out channel"

	depends on ETRAX_SERIAL_PORT3

	default ETRAX_SERIAL_PORT3_NO_DMA_OUT if ETRAX_ARCH_V32

	default ETRAX_SERIAL_PORT3_DMA4_OUT if ETRAX_ARCH_V10



config ETRAX_SERIAL_PORT3_NO_DMA_OUT

	bool "Ser3 uses no DMA for output"

	help

	  Do not use DMA for ser3 output.



config ETRAX_SERIAL_PORT3_DMA4_OUT

	depends on ETRAX_ARCH_V10

	bool "DMA 4"



config ETRAX_SERIAL_PORT3_DMA8_OUT

	bool "Ser3 uses DMA8 for output"

	depends on ETRAXFS

	help

	  Enables the DMA8 output channel for ser3 (ttyS3).

	  If you do not enable DMA, an interrupt for each character will be

	  used when transmitting data.

	  Normally you want to use DMA, unless you use the DMA channel for

	  something else.



config ETRAX_SERIAL_PORT3_DMA2_OUT

	bool "Ser3 uses DMA2 for output"

	depends on CRIS_MACH_ARTPEC3

	help

	  Enables the DMA2 output channel for ser3 (ttyS3).

	  If you do not enable DMA, an interrupt for each character will be

	  used when transmitting data.

	  Normally you want to use DMA, unless you use the DMA channel for

	  something else.



endchoice



endmenu



source "drivers/base/Kconfig"
@@ -174,22 +598,10 @@ source "drivers/pnp/Kconfig" 


source "drivers/block/Kconfig"



source "drivers/md/Kconfig"



source "drivers/ide/Kconfig"



source "drivers/scsi/Kconfig"



source "drivers/ieee1394/Kconfig"



source "drivers/message/i2o/Kconfig"



source "drivers/net/Kconfig"



source "drivers/isdn/Kconfig"



source "drivers/telephony/Kconfig"



source "drivers/i2c/Kconfig"



source "drivers/rtc/Kconfig"
@@ -201,17 +613,8 @@ source "drivers/input/Kconfig" 


source "drivers/char/Kconfig"



#source drivers/misc/Config.in

source "drivers/media/Kconfig"



source "fs/Kconfig"



source "sound/Kconfig"



source "drivers/pcmcia/Kconfig"



source "drivers/pci/Kconfig"



source "drivers/usb/Kconfig"



source "arch/cris/Kconfig.debug"

arch/cris/arch-v10/Kconfig

+4 −63
Original line number Diff line number Diff line 
if ETRAX_ARCH_V10



menu "CRIS v10 options"



# ETRAX 100LX v1 has a MMU "feature" requiring a low mapping

config CRIS_LOW_MAP

	bool
@@ -228,69 +230,6 @@ config ETRAX_LED12R 
	  For products with only one or two controllable LEDs,

	  set this to same as CONFIG_ETRAX_LED1G (normally 2).



choice

	prompt "Product debug-port"

	depends on ETRAX_ARCH_V10

	default ETRAX_DEBUG_PORT0



config ETRAX_DEBUG_PORT0

	bool "Serial-0"

	help

	  Choose a serial port for the ETRAX debug console.  Default to

	  port 0.



config ETRAX_DEBUG_PORT1

	bool "Serial-1"

	help

	  Use serial port 1 for the console.



config ETRAX_DEBUG_PORT2

	bool "Serial-2"

	help

	  Use serial port 2 for the console.



config ETRAX_DEBUG_PORT3

	bool "Serial-3"

	help

	  Use serial port 3 for the console.



config ETRAX_DEBUG_PORT_NULL

	bool "disabled"

	help

	  Disable serial-port debugging.



endchoice



choice

	prompt "Kernel GDB port"

	depends on ETRAX_KGDB

	default ETRAX_KGDB_PORT0

	help

	  Choose a serial port for kernel debugging.  NOTE: This port should

	  not be enabled under Drivers for built-in interfaces (as it has its

	  own initialization code) and should not be the same as the debug port.



config ETRAX_KGDB_PORT0

	bool "Serial-0"

	help

	  Use serial port 0 for kernel debugging.



config ETRAX_KGDB_PORT1

	bool "Serial-1"

	help

	  Use serial port 1 for kernel debugging.



config ETRAX_KGDB_PORT2

	bool "Serial-2"

	help

	  Use serial port 2 for kernel debugging.



config ETRAX_KGDB_PORT3

	bool "Serial-3"

	help

	  Use serial port 3 for kernel debugging.



endchoice



choice

	prompt "Product rescue-port"
@@ -454,4 +393,6 @@ config ETRAX_POWERBUTTON_BIT 
	help

	  Configure where power button is connected.



endmenu



endif

arch/cris/arch-v10/drivers/Kconfig

+0 −154
Original line number Diff line number Diff line
@@ -9,37 +9,6 @@ config ETRAX_ETHERNET 
	  This option enables the ETRAX 100LX built-in 10/100Mbit Ethernet

	  controller.



choice

	prompt "Network LED behavior"

	depends on ETRAX_ETHERNET

	default ETRAX_NETWORK_LED_ON_WHEN_ACTIVITY



config ETRAX_NETWORK_LED_ON_WHEN_LINK

	bool "LED_on_when_link"

	help

	  Selecting LED_on_when_link will light the LED when there is a

	  connection and will flash off when there is activity.



	  Selecting LED_on_when_activity will light the LED only when

	  there is activity.



	  This setting will also affect the behaviour of other activity LEDs

	  e.g. Bluetooth.



config ETRAX_NETWORK_LED_ON_WHEN_ACTIVITY

	bool "LED_on_when_activity"

	help

	  Selecting LED_on_when_link will light the LED when there is a

	  connection and will flash off when there is activity.



	  Selecting LED_on_when_activity will light the LED only when

	  there is activity.



	  This setting will also affect the behaviour of other activity LEDs

	  e.g. Bluetooth.



endchoice



config ETRAX_SERIAL

	bool "Serial-port support"

	depends on ETRAX_ARCH_V10
@@ -83,32 +52,6 @@ config ETRAX_SERIAL_PORT0 
	  Normally you want this on, unless you use external DMA 1 that uses

	  the same DMA channels.



choice

	prompt "Ser0 DMA out assignment"

	depends on ETRAX_SERIAL_PORT0

	default ETRAX_SERIAL_PORT0_DMA6_OUT



config ETRAX_SERIAL_PORT0_NO_DMA_OUT

	bool "No DMA out"



config ETRAX_SERIAL_PORT0_DMA6_OUT

	bool "DMA 6"



endchoice



choice

	prompt "Ser0 DMA in assignment"

	depends on ETRAX_SERIAL_PORT0

	default ETRAX_SERIAL_PORT0_DMA7_IN



config ETRAX_SERIAL_PORT0_NO_DMA_IN

	bool "No DMA in"



config ETRAX_SERIAL_PORT0_DMA7_IN

	bool "DMA 7"



endchoice



choice

	prompt "Ser0 DTR, RI, DSR and CD assignment"

	depends on ETRAX_SERIAL_PORT0
@@ -197,32 +140,6 @@ config ETRAX_SERIAL_PORT1 
	help

	  Enables the ETRAX 100 serial driver for ser1 (ttyS1).



choice

	prompt "Ser1 DMA out assignment"

	depends on ETRAX_SERIAL_PORT1

	default ETRAX_SERIAL_PORT1_DMA8_OUT



config ETRAX_SERIAL_PORT1_NO_DMA_OUT

	bool "No DMA out"



config ETRAX_SERIAL_PORT1_DMA8_OUT

	bool "DMA 8"



endchoice



choice

	prompt "Ser1 DMA in assignment"

	depends on ETRAX_SERIAL_PORT1

	default ETRAX_SERIAL_PORT1_DMA9_IN



config ETRAX_SERIAL_PORT1_NO_DMA_IN

	bool "No DMA in"



config ETRAX_SERIAL_PORT1_DMA9_IN

	bool "DMA 9"



endchoice



choice

	prompt "Ser1 DTR, RI, DSR and CD assignment"

	depends on ETRAX_SERIAL_PORT1
@@ -314,32 +231,6 @@ config ETRAX_SERIAL_PORT2 
	help

	  Enables the ETRAX 100 serial driver for ser2 (ttyS2).



choice

	prompt "Ser2 DMA out assignment"

	depends on ETRAX_SERIAL_PORT2

	default ETRAX_SERIAL_PORT2_DMA2_OUT



config ETRAX_SERIAL_PORT2_NO_DMA_OUT

	bool "No DMA out"



config ETRAX_SERIAL_PORT2_DMA2_OUT

	bool "DMA 2"



endchoice



choice

	prompt "Ser2 DMA in assignment"

	depends on ETRAX_SERIAL_PORT2

	default ETRAX_SERIAL_PORT2_DMA3_IN



config ETRAX_SERIAL_PORT2_NO_DMA_IN

	bool "No DMA in"



config ETRAX_SERIAL_PORT2_DMA3_IN

	bool "DMA 3"



endchoice



choice

	prompt "Ser2 DTR, RI, DSR and CD assignment"

	depends on ETRAX_SERIAL_PORT2
@@ -428,32 +319,6 @@ config ETRAX_SERIAL_PORT3 
	help

	  Enables the ETRAX 100 serial driver for ser3 (ttyS3).



choice

	prompt "Ser3 DMA out assignment"

	depends on ETRAX_SERIAL_PORT3

	default ETRAX_SERIAL_PORT3_DMA4_OUT



config ETRAX_SERIAL_PORT3_NO_DMA_OUT

	bool "No DMA out"



config ETRAX_SERIAL_PORT3_DMA4_OUT

	bool "DMA 4"



endchoice



choice

	prompt "Ser3 DMA in assignment"

	depends on ETRAX_SERIAL_PORT3

	default ETRAX_SERIAL_PORT3_DMA5_IN



config ETRAX_SERIAL_PORT3_NO_DMA_IN

	bool "No DMA in"



config ETRAX_SERIAL_PORT3_DMA5_IN

	bool "DMA 5"



endchoice



choice

	prompt "Ser3 DTR, RI, DSR and CD assignment"

	depends on ETRAX_SERIAL_PORT3
@@ -743,25 +608,6 @@ config ETRAX_RTC 
	  normal time reading should be done using libc function time and

	  friends.



choice

	prompt "RTC chip"

	depends on ETRAX_RTC

	default ETRAX_DS1302



config ETRAX_DS1302

	bool "DS1302"

	help

	  Enables the driver for the DS1302 Real-Time Clock battery-backed

	  chip on some products.



config ETRAX_PCF8563

	bool "PCF8563"

	help

	  Enables the driver for the PCF8563 Real-Time Clock battery-backed

	  chip on some products.



endchoice



config ETRAX_DS1302_RST_ON_GENERIC_PORT

	bool "DS1302 RST on Generic Port"

	depends on ETRAX_DS1302

arch/cris/arch-v32/Kconfig

+63 −64
Original line number Diff line number Diff line 
if ETRAX_ARCH_V32



source arch/cris/arch-v32/mach-fs/Kconfig

source arch/cris/arch-v32/mach-a3/Kconfig



source drivers/cpufreq/Kconfig



config ETRAX_DRAM_VIRTUAL_BASE

	hex

	depends on ETRAX_ARCH_V32

	default "c0000000"



config ETRAX_LED1G

	string "First green LED bit"

choice

	prompt "Nbr of Ethernet LED groups"

	depends on ETRAX_ARCH_V32

	default ETRAX_NBR_LED_GRP_ONE

	help

	  Select how many Ethernet LED groups that can be used. Usually one per Ethernet

	  interface is a good choice.



config	ETRAX_NBR_LED_GRP_ZERO

	bool "Use zero LED groups"

	help

	  Select this if you do not want any Ethernet LEDs.



config	ETRAX_NBR_LED_GRP_ONE

	bool "Use one LED group"

	help

	  Select this if you want one Ethernet LED group. This LED group

	  can be used for one or more Ethernet interfaces. However, it is

	  recomended that each Ethernet interface use a dedicated LED group.



config	ETRAX_NBR_LED_GRP_TWO

	bool "Use two LED groups"

	help

	  Select this if you want two Ethernet LED groups. This is the

	  best choice if you have more than one Ethernet interface and

	  would like to have separate LEDs for the interfaces.



endchoice



config ETRAX_LED_G_NET0

	string "Ethernet LED group 0 green LED bit"

	depends on ETRAX_ARCH_V32 && (ETRAX_NBR_LED_GRP_ONE || ETRAX_NBR_LED_GRP_TWO)

	default "PA3"

	help

	  Bit to use for the first green LED (network LED).

	  Most Axis products use bit A3 here.

	  Bit to use for the green LED in Ethernet LED group 0.



config ETRAX_LED1R

	string "First red LED bit"

	depends on ETRAX_ARCH_V32

config ETRAX_LED_R_NET0

	string "Ethernet LED group 0 red LED bit"

	depends on ETRAX_ARCH_V32 && (ETRAX_NBR_LED_GRP_ONE || ETRAX_NBR_LED_GRP_TWO)

	default "PA4"

	help

	  Bit to use for the first red LED (network LED).

	  Most Axis products use bit A4 here.

	  Bit to use for the red LED in Ethernet LED group 0.



config ETRAX_LED2G

config ETRAX_LED_G_NET1

	string "Ethernet group 1 green LED bit"

	depends on ETRAX_ARCH_V32 && ETRAX_NBR_LED_GRP_TWO

	default ""

	help

	  Bit to use for the green LED in Ethernet LED group 1.



config ETRAX_LED_R_NET1

	string "Ethernet group 1 red LED bit"

	depends on ETRAX_ARCH_V32 && ETRAX_NBR_LED_GRP_TWO

	default ""

	help

	  Bit to use for the red LED in Ethernet LED group 1.



config ETRAX_V32_LED2G

	string "Second green LED bit"

	depends on ETRAX_ARCH_V32

	default "PA5"
@@ -29,7 +75,7 @@ config ETRAX_LED2G 
	  Bit to use for the first green LED (status LED).

	  Most Axis products use bit A5 here.



config ETRAX_LED2R

config ETRAX_V32_LED2R

	string "Second red LED bit"

	depends on ETRAX_ARCH_V32

	default "PA6"
@@ -37,7 +83,7 @@ config ETRAX_LED2R 
	  Bit to use for the first red LED (network LED).

	  Most Axis products use bit A6 here.



config ETRAX_LED3G

config ETRAX_V32_LED3G

	string "Third green LED bit"

	depends on ETRAX_ARCH_V32

	default "PA7"
@@ -45,7 +91,7 @@ config ETRAX_LED3G 
	  Bit to use for the first green LED (drive/power LED).

	  Most Axis products use bit A7 here.



config ETRAX_LED3R

config ETRAX_V32_LED3R

	string "Third red LED bit"

	depends on ETRAX_ARCH_V32

	default "PA7"
@@ -53,39 +99,6 @@ config ETRAX_LED3R 
	  Bit to use for the first red LED (drive/power LED).

	  Most Axis products use bit A7 here.



choice

	prompt "Product debug-port"

	depends on ETRAX_ARCH_V32

	default ETRAX_DEBUG_PORT0



config ETRAX_DEBUG_PORT0

	bool "Serial-0"

	help

	  Choose a serial port for the ETRAX debug console.  Default to

	  port 0.



config ETRAX_DEBUG_PORT1

	bool "Serial-1"

	help

	  Use serial port 1 for the console.



config ETRAX_DEBUG_PORT2

	bool "Serial-2"

	help

	  Use serial port 2 for the console.



config ETRAX_DEBUG_PORT3

	bool "Serial-3"

	help

	  Use serial port 3 for the console.



config ETRAX_DEBUG_PORT_NULL

	bool "disabled"

	help

	  Disable serial-port debugging.



endchoice



choice

	prompt "Kernel GDB port"

	depends on ETRAX_KGDB
@@ -95,25 +108,11 @@ choice 
	  not be enabled under Drivers for built-in interfaces (as it has its

	  own initialization code) and should not be the same as the debug port.



config ETRAX_KGDB_PORT0

	bool "Serial-0"

	help

	  Use serial port 0 for kernel debugging.



config ETRAX_KGDB_PORT1

	bool "Serial-1"

	help

	  Use serial port 1 for kernel debugging.



config ETRAX_KGDB_PORT2

	bool "Serial-2"

	help

	  Use serial port 2 for kernel debugging.



config ETRAX_KGDB_PORT3

	bool "Serial-3"

config ETRAX_KGDB_PORT4

	bool "Serial-4"

	depends on ETRAX_SERIAL_PORTS = 5

	help

	  Use serial port 3 for kernel debugging.

	  Use serial port 4 for kernel debugging.



endchoice

arch/cris/arch-v32/drivers/Kconfig

+478 −215

File changed.

Preview size limit exceeded, changes collapsed.

CRA Git | Maintained and supported by SUSTech CRA and CCSE