Commit 91a247d7 authored by Linus Torvalds's avatar Linus Torvalds
Browse files

Merge tag 'for-linus-20150901' of git://git.infradead.org/linux-mtd 

Pull MTD updates from Brian Norris:
 "SPI NOR:
   - reduce virtual address space requirements for fsl-quadspi memory map
   - new fsl-quadspi IP support: imx6ul-qspi and imx7d-qspi
   - add new NOR flash device support
   - add new driver for NXP SPI Flash Interface (SPIFI)
   - stop abusing SPI API structs for non-SPI framework
   - fixup DT table matching for new "jedec,spi-nor" string

  NAND:
   - brcmnand: fix big endian MIPS macro usage
   - denali: refactor to use devres, dev_*() printing, etc.
   - OMAP ELM: change the module alias to actually be usable
   - pxa3xx_nand: fixup a few command sequencing issues -- both new and old
      - race conditions in the IRQ handler status clearing
      - problems when a bootloader left interrupts pending
      - config issues when overriding the bootloader configuration
   - new flash device support
   - sunxi_nand:
      - optimize timing configuration by calculation, rather than fixed
        fail-safe values
      - use EDO setting from ONFI
   - r852: fix compiler warnings
   - davinci: add 4KB page support

  Core:
   - oobtest: correct debug print information"

* tag 'for-linus-20150901' of git://git.infradead.org/linux-mtd: (42 commits)
  mtd: mtd_oobtest: Fix the address offset with vary_offset case
  mtd: blkdevs: fix switch-bool compilation warning
  mtd: spi-nor: stop (ab)using struct spi_device_id
  mtd: nand: add Toshiba TC58NVG0S3E to nand_ids table
  mtd: dataflash: Export OF module alias information
  nand: pxa3xx: Increase READ_ID buffer and make the size static
  mtd: nand: pxa3xx-nand: fix random command timeouts
  mtd: nand: pxa3xx_nand: fix early spurious interrupt
  mtd: pxa3xx_nand: add a default chunk size
  mtd: omap_elm: Fix module alias
  mtd: physmap_of: fix null pointer deference when kzalloc returns null
  mtd: nettel: do not ignore mtd_device_register() failure in nettel_init()
  mtd: denali_pci: switch to dev_err()
  mtd: denali_pci: refactor driver using devres API
  mtd: denali_pci: use module_pci_driver() macro
  mtd: denali: hide core part from user in Kconfig
  mtd: spi-nor: add Spansion S25FL204K support
  mtd: spi-nor: Improve Kconfig help text for SPI_FSL_QUADSPI
  mtd: spi-nor: add driver for NXP SPI Flash Interface (SPIFI)
  doc: dt: add documentation for nxp,lpc1773-spifi
  ...
parents 8bdc69b7 718e38b4

Documentation/devicetree/bindings/mtd/fsl-quadspi.txt

+2 −1
Original line number Diff line number Diff line 
* Freescale Quad Serial Peripheral Interface(QuadSPI)



Required properties:

  - compatible : Should be "fsl,vf610-qspi" or "fsl,imx6sx-qspi"

  - compatible : Should be "fsl,vf610-qspi", "fsl,imx6sx-qspi",

		 "fsl,imx7d-qspi", "fsl,imx6ul-qspi"

  - reg : the first contains the register location and length,

          the second contains the memory mapping address and length

  - reg-names: Should contain the reg names "QuadSPI" and "QuadSPI-memory"

Documentation/devicetree/bindings/mtd/nxp-spifi.txt

0 → 100644
+58 −0
Original line number Diff line number Diff line 
* NXP SPI Flash Interface (SPIFI)



NXP SPIFI is a specialized SPI interface for serial Flash devices.

It supports one Flash device with 1-, 2- and 4-bits width in SPI

mode 0 or 3. The controller operates in either command or memory

mode. In memory mode the Flash is accessible from the CPU as

normal memory.



Required properties:

  - compatible : Should be "nxp,lpc1773-spifi"

  - reg : the first contains the register location and length,

          the second contains the memory mapping address and length

  - reg-names: Should contain the reg names "spifi" and "flash"

  - interrupts : Should contain the interrupt for the device

  - clocks : The clocks needed by the SPIFI controller

  - clock-names : Should contain the clock names "spifi" and "reg"



Optional properties:

 - resets : phandle + reset specifier



The SPI Flash must be a child of the SPIFI node and must have a

compatible property as specified in bindings/mtd/jedec,spi-nor.txt



Optionally it can also contain the following properties.

 - spi-cpol : Controller only supports mode 0 and 3 so either

              both spi-cpol and spi-cpha should be present or

              none of them

 - spi-cpha : See above

 - spi-rx-bus-width : Used to select how many pins that are used

                      for input on the controller



See bindings/spi/spi-bus.txt for more information.



Example:

spifi: spifi@40003000 {

	compatible = "nxp,lpc1773-spifi";

	reg = <0x40003000 0x1000>, <0x14000000 0x4000000>;

	reg-names = "spifi", "flash";

	interrupts = <30>;

	clocks = <&ccu1 CLK_SPIFI>, <&ccu1 CLK_CPU_SPIFI>;

	clock-names = "spifi", "reg";

	resets = <&rgu 53>;



	flash@0 {

		compatible = "jedec,spi-nor";

		spi-cpol;

		spi-cpha;

		spi-rx-bus-width = <4>;

		#address-cells = <1>;

		#size-cells = <1>;



		partition@0 {

			label = "data";

			reg = <0 0x200000>;

		};

	};

};

drivers/mtd/devices/m25p80.c

+11 −7
Original line number Diff line number Diff line
@@ -223,8 +223,6 @@ static int m25p_probe(struct spi_device *spi) 
	 */

	if (data && data->type)

		flash_name = data->type;

	else if (!strcmp(spi->modalias, "spi-nor"))

		flash_name = NULL; /* auto-detect */

	else

		flash_name = spi->modalias;
@@ -289,19 +287,25 @@ static const struct spi_device_id m25p_ids[] = { 
	{"m25p40-nonjedec"},	{"m25p80-nonjedec"},	{"m25p16-nonjedec"},

	{"m25p32-nonjedec"},	{"m25p64-nonjedec"},	{"m25p128-nonjedec"},



	/*

	 * Generic support for SPI NOR that can be identified by the JEDEC READ

	 * ID opcode (0x9F). Use this, if possible.

	 */

	{"spi-nor"},

	{ },

};

MODULE_DEVICE_TABLE(spi, m25p_ids);



static const struct of_device_id m25p_of_table[] = {

	/*

	 * Generic compatibility for SPI NOR that can be identified by the

	 * JEDEC READ ID opcode (0x9F). Use this, if possible.

	 */

	{ .compatible = "jedec,spi-nor" },

	{}

};

MODULE_DEVICE_TABLE(of, m25p_of_table);



static struct spi_driver m25p80_driver = {

	.driver = {

		.name	= "m25p80",

		.owner	= THIS_MODULE,

		.of_match_table = m25p_of_table,

	},

	.id_table	= m25p_ids,

	.probe	= m25p_probe,

drivers/mtd/devices/mtd_dataflash.c

+1 −0
Original line number Diff line number Diff line
@@ -102,6 +102,7 @@ static const struct of_device_id dataflash_dt_ids[] = { 
	{ .compatible = "atmel,dataflash", },

	{ /* sentinel */ }

};

MODULE_DEVICE_TABLE(of, dataflash_dt_ids);

#endif



/* ......................................................................... */

drivers/mtd/maps/nettel.c

+10 −3
Original line number Diff line number Diff line
@@ -385,20 +385,28 @@ static int __init nettel_init(void) 
	}

	rc = mtd_device_register(intel_mtd, nettel_intel_partitions,

				 num_intel_partitions);

	if (rc)

		goto out_map_destroy;

#endif



	if (amd_mtd) {

		rc = mtd_device_register(amd_mtd, nettel_amd_partitions,

					 num_amd_partitions);

		if (rc)

			goto out_mtd_unreg;

	}



#ifdef CONFIG_MTD_CFI_INTELEXT

	register_reboot_notifier(&nettel_notifier_block);

#endif



	return(rc);

	return rc;



out_mtd_unreg:

#ifdef CONFIG_MTD_CFI_INTELEXT

	mtd_device_unregister(intel_mtd);

out_map_destroy:

	map_destroy(intel_mtd);

out_unmap1:

	iounmap(nettel_intel_map.virt);

#endif
@@ -407,8 +415,7 @@ out_unmap2: 
	iounmap(nettel_mmcrp);

	iounmap(nettel_amd_map.virt);



	return(rc);



	return rc;

}



/****************************************************************************/

CRA Git | Maintained and supported by SUSTech CRA and CCSE